Shenzhen Dele Power Electronic DLH-8690A Mobile Power Adapter Instructions
- June 6, 2024
- Shenzhen Dele Power Electronic
Table of Contents
Shenzhen Dele Power Electronic DLH-8690A Mobile Power Adapter
FCC Caution
-
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Mobile power adapter
Adapter mode :
lnput:AC 100-240V/0.4A,50-60HZ| USB-A Output:5V/3A,9V/2A,12V/1.5A
USB-C Output:5V/3A,9V/2.22A,12V/1.67A| USB-A+USB-C Output:5V/3A
Mobile power mode :
USB-A Output:5V/3A,5V4.5A,9V/2A,12V/1.5A| USB-C Output:5V/3A9V/2.22A,12V/1.67A
USB-A+USB-C Output:5V/3A| battery capacity:10000mah/3.7V 37W
Wireless charging mode:
Wireless charging output: 15W(Max)
USB-A+USB-C+ wireless charging simultaneously output: 5V /3A
Ambient temperature: 25°C
Method of application
Please select the matching data line to charge according to the mobile phone
or digital product.
There are two types of use:
- AC pin inserted into the AC socket, power indicator light, priority to charge the output charging product. If the output does not charge the product, charge the product internally.
- AC pin does not connect to the socket, when there is have electricity □ then charge the output charging product.
During charging / discharging, the LEO indicator light is always bright ,It’s the current amount of electricity, LED Flicker is charging quantity, The first lamp is 25%, the second is 25-50%, the third is 50-75%, and the fourth is 75-100%;35 seconds after the product is filled or removed out, the indicator lights go out and the product enters standby state;
Precautions
- If the battery is not used for a long time, it is recommended to maintain a certain power capacity, and charge the product at least once every three months;
- In the process of use or charging, if the equipment is slightly fever, it is a normal phenomenon, not a fault;
- Recommend using this product at room temperature and away from moisture, high temperature and fire. Do not disassemble, avoid falling products;
- If the battery is found to expand, leak or some smell, please stop using immediately;
- When children use product, they should be guided by parents and strictly follow the instructions to ensure their correct use;
- Please do not throw or burn waste products, please take good care of the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>