Topjoy E701 Butterfly E-Reader Installation Guide

Tapjoy Butterfly E-reader E701
Quick Implementation Guide
Tapjoy Butterfly

Read me first

Please read the following safety instructions before use.

Waste Disposal

• Please DO NOT dispose of this final product as normal trash, the assembled parts are designed for recycling and reuse, please follow the related disposal regulation at your region.
• Please DO NOT place or store this final product close to the fire source, it may cause an explosion accident.

Handling, Maintenance, and Safety

• Please DO NOT place heavy objects on your Butterfly E-reader; failure to do so may result in damage to the display panel.
• The touch panel surface easily has scratch damage, please operate with care, and avoid contact damage with another object.
• Touch screen with your finger on the display, DO NOT use sharp or metallic objects that may cause scratches and damage.
• Please use the standard USB-C cable to charge the device, failure to do so may cause damage to it.
• Before cleaning the equipment, the power must be cut oft Please DO NOT use alcohol, liquid, or spay type of detersive to clean the equipment.
• Please wipe the surface of the appliance with a soft cloth with water or non-alkaline cleaners, or gently wipe the display with a soft, lint-free cloth.
• Use a soft cloth to remove dust from the display, touch screen surface has a special protective coating, will prevent dust from sticking to it; without using a soft cloth, and may cause damage to the protective coating.
• Please DO NOT disassemble the equipment. For your safety concern, only a qualified serviceman can open the equipment.
• The using temperature is 0-40°C, please use this tablet in this range.

Tapjoy Butterfly E-reader Structure Illustrations

Please find below the E-reader product illustration picture to learn more about the product.
The picture includes front, back, top, bottom side faces. All the key hardware features are identified as listed.

Power| • Press to turn the device on and off
• Press to lock and unlock the screen
• Long press Los to force shutdown
---|---
USB-C port| • Connect the PC and device by using a data cable to transmit data, or change the color e-Paper reader
• Support OTG
Indicator| • Battery charge indicator
MIC| • Record
Speaker| • Play audio
Reset button| • Press to reset the device

Tapjoy Butterfly E-reader and Accessories List Inside the Case

Tapjoy Butterfly E-reader xl
Stylus Pen ( Note: Only E701 is equipped with a stylus pen) X
USB-C Cable xl
Quick Implementation Guide xl

Start using

Home

Home interface Includes status bar, content area, and function bar.

Function bar can switch the main functions of the device;
Click the function icon to return to the home page.

Read

Press Read to enter the bookshelf interface, all the book covers are shown here. Click on the book cover to enter reading, while you can also search, sort, multi-select, and create new folders for books.

Note

There is a toolbar, content area, and page number three parts.

Settings

You can check the equipment model and version in the settings, and set other parameters. Click the product picture to download the user manual.

Specification

Basic Trouble Shooting

5.1 The device displays an error message for the network or service
If you are in an area where the signal is weak or the reception is poor, may not receive the signal well. Please move to another area and try again. Error messages may occur repeatedly as you move.

5.2 The device is unable to POWER ON successfully
When the battery is fully discharged, the unit will not be turned on. Fully charge the battery before turning on the unit.

5.3 Touch the screen to respond slowly or unresponsive

• If you install a screen saver or buy accessories on the touch screen, the touch screen may not function properly.
• If you wear gloves when touching the touch screen, your fingers are not clean, or you touch the screen with a sharp object or fingertip, the touch screen may fail.
• Touch screen may fail in wet conditions.
• Restart your device to clear any temporary software errors.
• Confirm that your device’s software has been updated to the latest version.

5.4 Equipment crashes or a serious heating issue
Try the following solutions, if the problem is still not resolved; please contact the designated after-sales service center.
5.4.1 Reboot the device If the device occurs, you may need to close the application or turn the device off and power it on again.
5.4.2 Force restart If the unit fails to respond, press and hold the power key for more than 10 seconds to restart the device.
5.4.3 RESET If the above party does not resolve the issue, perform a factory reset operation.
Settings —’ About tablet —> Factory data reset —> Erase all data -‘ Delete all data (factory reset).
Please remember to back up all the important material stored in the unit before performing the reset set-up operation.
5.5 The network is often interrupted
5.5.1 Wi-Fi signal weak

• The e-Reader may be out of range. Move it closer to an access point or another wireless LAN device associated with it.
• Check your surroundings for interference, such as microwave ovens, wireless phones, and mobile tablets should stay away from objects that cause interference.

5.6 Battery Status Icon is empty Battery Level is low; please charge the battery right away. 5.7 The battery is not charging properly

• Please make sure the battery charger is connected correctly.

5.8 Battery runs out faster than at the start of the purchase

• When the device or battery is exposed to extremely cold or extremely hot temperatures, the effective charge may decrease. • Battery is a consumer and will be less effective over time.

5.9 Bluetooth doesn’t work
If another Bluetooth device is not located or has a connection or performance problem, try the following:

• Make sure the device you want to connect to is ready to search or connect.
• Make sure your device and other Bluetooth devices are within the maximum Bluetooth range(10m).
• On the device, switch Bluetooth OFF and ON to restart.
• On the device, restore factory default, perform this operation will clear the data, please do a backup first.

5. 10 Data stored on the device has been lost

Please ensure that you have fully backed up all the data stored on the device regularly. We are not held liable for the permanent loss, damage, or misuse of your data.

Warranty Card

Product Name|
---|---
Model.|
Buying Date|
User Name|
User Phone|

Warranty Description:
During 1 year warranty, we will provide free repair service if the fault is caused by the quality issue of the device under normal use.
This card is a warranty certificate, pls keep it well.

Warranty Clauses

1. Users can find 1 User Manual and 1 warranty card after they buy it.Pls, fill in the warranty card to keep as a Warranty Certificate.

2. During 1 year from the buying date, users who hold the warranty card can enjoy free repair Service if the quality issue occurs when the device is used normally.

3. Below are situations no included in the warranty range:
   A . There is no signature or stamp of sales unit
   B . Contrived or irresistible factors lead to damage
   C . Device normal wear

4. If the faults are caused by contrived or irresistible factors, we will charge a certain spare part cost for repairing.

5. Pls request a warranty from a local agent or our factory when the device occurs faults, pls write the Detailed address, name, phone no. and fault description.

Service-Hotline: +86 755 82814862
Email: support@topjoyint.com
Website: www.topjoyint.com
Address: 2A, Block A, Central Avenue,
Baoyuan Road, Xixiang Ban An District, Shenzhen, China,518100

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Top Joy International Development Group Ltd may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. RF exposure statement: The device compliance RF exposure requirement can be installed and used without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>