ROCKJAM RJK-POP-SOLO Bluetooth Karaoke Party Speaker User Guide
- June 6, 2024
- ROCKJAM
Table of Contents
- ROCKJAM RJK-POP-SOLO Bluetooth Karaoke Party Speaker User Guide
- Warnings
- Important Safety Instructions
- Location of Controls
- Microphone
- Charging the Karaoke Party Speaker
- Operation
- Bluetooth Operation
- Song control
- Volume control
- Switching the Lightshow On/Off
- Voice Effects
- Listening to your iPhone, iPod, MP3 player etc. (AUX input)
- Using the Microphone
- Troubleshooting Guide
- No power
- No sound – Bluetooth mode
- No sound – AUX Input mode
- No sound from the microphone
- Bluetooth device pairing problems
- Other Bluetooth problems
- Finding Karaoke Videos to Sing Along to
- EU and UK Regulatory Compliance
- product Disposal instruction
- FCC Compliance Statement
- Specifications
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ROCKJAM RJK-POP-SOLO Bluetooth Karaoke Party Speaker User Guide
Warnings
This product is designed primarily for indoor use. Do not expose to rain or
other kinds of moisture as that could lead to irreparable damage and the risk
of electric shock.
Do not open the Bluetooth Speaker casing under any circumstance. This could
lead to damage or risk of electric shock.
Important Safety Instructions
- Read instructions – All the safety and operating instructions should be read before the appliance is operated
- Retain instructions – The safety and operating instructions should be retained for future reference.
- Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow instructions – All operation and use instructions should be followed.
- Water and Moisture – The appliance should not be used near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
- Heat – The appliance should be situated away from heat sources such as radiators, stoves or other appliances (including amplifiers) that produce heat.
- Power Sources – The appliance should be charged from a power supply only of the type described in the operating instructions or as marked on the appliance.
- Cleaning – The appliance should be cleaned only with a lightly dampened cloth. Do not use solvents that will damage the plastics finish.
- Long Periods of Non-Use – The Bluetooth Speaker should be unplugged from the USB charging source when left unused for a long period of time.
- Object and Liquid Entry – Care should be taken so that objects do not fall, and liquids are not spilled into the enclosure through openings.
- Damage Requiring Service – The appliance should be serviced by qualified service personnel when:
- The USB power connector has been damaged; or
- Objects have fallen, or liquid has been spilled into the appliance; or
- The appliance has been exposed to rain; or
- The appliance does not appear to operate normally or exhibits a marked change in performance; or
- The appliance has been dropped, or the enclosure damaged.
12. Servicing – The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.
Location of Controls
Karaoke Speaker
1| POWER/ VOLUME
CONTROL
| Turn to power on or off. When powered on, turn to adjust the output
volume.
---|---|---
2| MICROPHONE CHARGE DOCK| Place the wireless microphone into the charge
dock in the upright position. Note : In order to charge the microphone,
the karaoke
speaker must be plugged in to a power outlet via the USB cable.
3| CHARGE INDICATOR LED| Lights up red during charging and goes off when fully charged.
Note : The speaker can be left connected to the charger when off or in use; it will not overcharge.
4| LIGHTSHOW| Press once for disco lightshow only, press again for mood light only, press a third time to turn the lightshows off. Press again to turn both
lightshows back on.
5| ECHO| Press once for echo, press again to turn the echo off.
6| BLUETOOTH INDICATOR
LIGHT
| Flashes blue when searching for a Bluetooth device to connect to.
Once fully connected to a device the blue light will stay on.
7| BLUETOOTH| Press once to switch the Bluetooth searching mode on.
8| VOICE EFFECTS| Press to cycle through the voice effects. There are 4
voice effects +
normal voice to choose from.
9| WIRELESS ON / OFF MIC VOLUME CONTROL| Turn to switch wireless on or off. When wireless is on, turn to adjust the output volume of the wireless microphone/s. Note : switch off the Wireless receiver by turning fully anti-clockwise when the mics are
not being used.
Microphone
10| MICROPHONE| Sing clearly in the direction of the top part of the microphone.
Note: The microphone volume can only be adjusted from the main
karaoke speaker.
---|---|---
11| LIGHTSHOW| Built – in Lightshow.
12| POWER SWITCH| Push upwards to power on and downwards to switch off.
13| CHARGE INDICATOR LIGHT| Lights up red when the Microphone is
charging.
Note : To charge the microphone, the karaoke speaker must be plugged in to a power outlet via the USB cable.
14| CHARGING POINT| For charging, make sure the microphone is placed fully into the charging dock at the back of the karaoke speaker.
Note: The Mic charge light and charge light on the main speaker should both light up red to indicate charging mode.
Initial Setup
Unpacking
Unpack the karaoke party speaker carefully. We recommend that you save the box and packing materials in case you wish to store the speaker. Before setting up the unit, verify that the following accessories are present:
- 1 x USB power cable
- 1 x AUX input audio cable
- 1 x Wireless Microphone (RJK-POP-SOLO) or 2 x Wireless Microphones (RJK-POP-DUO)
Charging the Karaoke Party Speaker
Unwind the USB power cable to its full length; connect one end to the DC input jack on the back of the speaker. Connect the other end to a USB power adapter or PC USB port. The charge indicator LED will light up red to indicate charging. Charge for at least 4 hours before first use. The charge indicator LED will go out when the speaker is fully charged.
Operation
Switching the Karaoke Party Speaker On/ Off
Turn the POWER/ VOLUME control forward to switch on. You will feel a click and a chime will be heard. The speaker will power up in Bluetooth mode and will be actively searching for an available Bluetooth audio device. To turn the speaker off, turn the POWER/ VOLUME control anti-clockwise until you feel the click and cannot turn anymore.
Bluetooth Operation
The RockJam Party Speaker is a high-quality Bluetooth speaker. Music can be played through the Speaker from a compatible Bluetooth device such as a mobile phone or tablet device.
After the power up chime you will hear a “Ding Dong” sound. This means the
speaker is searching for a Bluetooth device.
Using your mobile phone or other Bluetooth enabled device, search for
Bluetooth devices and select ‘RockJam K-POP’ from the list of devices found.
The Bluetooth device should then connect to the karaoke speaker. You will hear
the same “Ding Dong” sound when a successful connection is established.
Song control
- Press the PLAY/ PAUSE button on the selected device (iPhone, iPod, MP3 player etc.) to alternately play and pause the song.
- Press the SKIP BACK button on the selected device (iPhone, iPod, MP3 player etc.) to go back to the start of a track.
- Press the SKIP FORWARD button on the selected device (iPhone, iPod, MP3 player etc.) to go to the next track.
Volume control
The speaker output volume can be adjusted in two ways as follows;
- Adjust the volume on the Bluetooth device, mobile phone, tablet computer, iPad etc.
- Turn the POWER/ VOLUME control at the right side of the speaker up or down.
Switching the Lightshow On/Off
Press once for disco lightshow only, press again for mood light only, press a third time to turn lightshows off.
Voice Effects
Press the VOICE EFFECTS button to choose a voice effect. Cycle through the 4 different voice effects and normal voice by pressing the button.
Listening to your iPhone, iPod, MP3 player etc. (AUX input)
You can listen to the sound of a connected external audio device such as an iPhone, iPod or MP3 player through your speaker. Connect one end of the 3.5 mm jack cable supplied to the AUX input socket located at the back of karaoke party speaker, and the other end to your audio equipment (iPhone, iPod, MP3, PC, CD player, etc). The speaker will automatically change to AUX input mode once the AUX IN cable has been inserted. NOTE: Use the SKIP FORWARD/ BACKWARD controls of the connected audio device to control the song playback.
Using the Microphone
You can sing along to any music playing from the karaoke speaker using the
microphone included. Adjust the microphone volume using the left dial and echo
control as desired. If any howling sound occurs, then stand further away from
the speaker or reduce the music or microphone volume until the howling stops.
Be sure to switch the microphone on first using the switch on the microphone.
NOTE: Do not tap or bang the microphone as this can cause damage to both the
microphone and speaker.
Troubleshooting Guide
If you encounter any issues while using the karaoke speaker then please check the following before contacting the retailer or manufacturer for further help:
No power
- The power is not on; make sure the party speaker POWER/ VOLUME control is not turned fully anti-clockwise.
- The karaoke speaker could be completely out of charge. Recharge the speaker using a USB power supply and then try again. No lightshow effect
- The Lightshow is probably just switched off. Press the LIGHTSHOW button to turn on the lights.
No sound – Bluetooth mode
- Make sure that you are not trying to use Bluetooth while the AUX in cable is connected.
- The main volume could be set to minimum; raise the volume.
No sound – AUX Input mode
- Make sure the 3.5mm jack cable has been plugged in.
- Make sure the iPod/ iPhone/ MP3 player is connected properly and that a song is playing.
- Adjust the volume on the audio device.
No sound from the microphone
- Make sure the microphone is within wireless range to be able to connect to the speaker.
- Make sure the ON/ OFF switch on the microphone is set to the ON position.
- Make sure the WIRELESS ON-OFF/ MIC VOL control on the side of the speaker is not turned fully anti-clockwise or set too low. NOTE: switch off the Wireless receiver by turning fully anti clockwise when the mics are not being used.
Bluetooth device pairing problems
Mobile phone or Tablet etc. cannot be paired or connected with the Karaoke Party speaker.
- You may not have activated the Bluetooth function of your mobile device; refer to the Bluetooth device user guide.
- The speaker is not in pairing mode; switch the karaoke party speaker off and then on to restart pairing or press the Bluetooth control button.
- Another Bluetooth device may be connected; disconnect that device before trying to connect a new Bluetooth device.
Other Bluetooth problems
The music does not play on the karaoke speaker after successfully connecting with Bluetooth
- Ensure your Bluetooth device can support the A2DP Bluetooth profile.
- The volume on the external Bluetooth device is set to low or muted; raise the volume of the Bluetooth device as required.
- The Bluetooth audio breaks up. Move the Bluetooth device closer to the party speaker or switch off the ‘Wi-Fi’ on the Bluetooth device as that can sometimes improve the audio playback quality.
Finding Karaoke Videos to Sing Along to
Karaoke videos’ can be found easily by searching online using a search
provider such as Google. YouTube is also a great source for Karaoke videos. A
good source of content:
https://www.youtube.com/user/TheKARAOKEChannel
Disclaimer: PDT Ltd. is not responsible for any content on ‘The KARAOKE
Channel’ Battery Warnings.
- Do not dismantle, open or shred secondary cells or batteries.
- Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
- Keep batteries out of the reach of children
- Battery usage by children should be supervised. Especially keep small batteries out of reach of small children.
- Seek medical advice immediately if a cell or a battery has been swallowed.
EU and UK Regulatory Compliance
This speaker complies with the EU and UK RED (Radio Equipment) Directive and bears the CE and UKCA marks in accordance with that, If required please contact the supplier PDT Ltd. by email, info@pdtuk.com for full ‘Declaration of Conformity’ details.
product Disposal instruction
The symbol shown here and, on the product, means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has been put in place to encourage the recycling of products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increase of landfill.
When you have no further use for this product, please dispose of it using your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.
FCC Compliance Statement
This device complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions: This device
may not cause harmful interference. This device must accept any interference
received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instructions, may cause interference
harmful to radio communications. There is no guarantee, however, that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the
equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio or TV
technician for help.
Specifications
AUDIO
OUTPUT POWER (MAXIMUM)……………………………………………………5 Watts RMS
SPEAKER FULL RANGE DRIVER RATING………………………. 7.7cm, 5W, 2.5 Ohm
FREQUENCY RESPONSE……………………………………………………… 150Hz – 20kHz
SIGNAL-TO-NOISE RATIO………………………………………………………….. >70dB
BLUETOOTH
Working Distance………………………….
.Up to 10 metres in open space (less indoors)
MISCELLANEOUS
Lithium Battery Main unit………………………………………………………….. 7.4V, 1500 mAh
Lithium Battery Microphone………………………… 3.7V, 750 mAh
Power Input………………………………………………………… 5V DC @ 500 mA max
Light Output……………………………………..…………… LEDS, Red, Green and Blue
Dimensions Main Unit (L x W x H)………………………………………. 20.5 x 20.5 x
18.5 cm
Dimensions Microphone (L x W x H)………………………………………. 3.4 x 3.4 x 18.8 cm
Weight……………………………………………………………………………………………….. 1.80 kg
Specifications are subject to change without notice.
iPod and iPhone are trademarks of Apple Inc. registered in the U.S. and other
countries.
RockJam is a trademark of PDT Ltd. registered in the UK and USA
PDT Ltd. Unit 4B, Greengate Industrial Estate, White Moss View, Middleton,
Manchester M24 1UN, United Kingdom info@pdtuk.com