eve room Indoor Air Quality Monitor User Guide

June 6, 2024
eve room

eve room logo

eve room Indoor Air Quality Monitor

eve room Indoor Air Quality Monitor

Get started

  1. To activate Eve Room, connect it to a standard USB power supply (5 V, at least 500 mA) via the included USB cable. This can be your iPhone‘s power adapter, for example.Get started
    When battery levels are low and during charging, Eve Room will stop measuring air quality. It takes approximately 2 hours to fully charge Eve Room.Get
started-1

  2. Download the Eve app from the App Store.Get started-2Get started-3

  3. Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.Get started-4

Get started-5

If you have already set up another accessory, go to Settings in Eve to add Eve Room to your home.

Enjoy

  • Access Eve Room using the Eve app, the Home app, and Siri.
  • View air quality, temperature and humidity
  • Review past conditions by day, month, or year

Rules
Install firmware updates

View air quality, temperature and humidity

Configure guest access

Ask for air quality, temperature and humidity

eve room Indoor Air Quality Monitor-1

Securely access Eve Room while you’re away from home and set up powerful automations. Any Apple TV HD, Apple TV 4K or HomePod using the same iCloud account as your iPhone will automatically serve as a home hub, no further setup required.

Enjoy

Eve is designed to safeguard your personal data. All data is fully encrypted and only transferred directly between your Eve Room and iPhone, iPad or home hub. Learn more at evehome.com/privacy

Touch the capacitive controls to cycle through displays.

eve room Indoor Air Quality Monitor-3

Air quality is influenced by numerous environmental factors that are unique to every home. Eve Room will automatically adjust to your home throughout its first day of operation, during which time air quality measurements may appear irregular.

Legal Information

This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Changes or modifications not expressly approved by Eve Systems could void your authority to operate this device. Purpose of control: operating control; construction of control: plug-in operating control; type 1 action, operating time: continuous.

Simultaneously touch both capacitive controls until the reset icon appears on the display. Then press the Reset button on the back of Eve Room within 30 seconds.

eve room Indoor Air Quality Monitor-4

Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals