BRESI MGA64922 Wireless Mouse Bluetooth User Manual
- June 6, 2024
- BRESI
Table of Contents
BRESI MGA64922 Wireless Mouse Bluetooth User Manual
Packing list
-
Mouse
-
USB Receiver
-
User Manual
Basic Specification
- Mouse size:100.1×62.45×35.62mm
- Mouse net weight:58.0g±5.0g
System support:
2.4G mode:
- Windows XP
- Windows7
- Windows8.1
- Windows10
- Mac OS X10.4 or above
Diagram
- Left Button
- Right Button
- Scroll Wheel
- DPI Button
- Mode Switch Button
- USB Receiver (Stored in battery compartment)
- Switch
Mouse Features
- The mouse is equipped with 3 DPI (800 /1200/1 600) and the default setting is 1600. You can switch them cyclically by pressing DPI button.
- Power Saving Mode: The mouse will enter into sleep mode if it’s unused for 30 min, and it can be woken up by pressing any button on it.
- Forward and backward buttons are not avail-able on Mac OS devices.
Instructions
- Take out mouse from the package, and take out USB receiver from battery compartment of the mouse.
- Put a 1 .SV AA dry cell into mouse with the correct polarity direction.
- Plug the USB receiver in computer port.
- They are available after the drive is installed on computer automatically.
Solutions for 2.4G Connecting Problems
Repeat the pairing steps after confirming that mouse is under in 2.4G mode. Press left button, right button and scroll wheel simultaneously for 3-5 seconds, and release them after the indicator light flashes quickly. Then plug USB receiver in computer port for pairing.
Note If the product is still not workable after above solutions, you could repeat those steps for a few times. If your problem can’t get solved yet, please contact our Customer Service for help.
FCC Declaration of Compliance Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Pules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses, and can radiate radio frequency energy. and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.