SEIKI SC-520AU8FD 474L Multi-Door Refrigerator Instruction Manual

474L
MULTI-DOOR
REFRIGERTOR
SC-520AU8FD

INSTRUCTION MANUAL
Please read this manual carefully before using, it and keep it for future reference.

GENERAL SAFETY

IMPORTANT INFORMATION
Read this manual thoroughly before you start using the Refrigerator.
The safety precautions instructions reduce the risk of fire, electric shock, and injury when correctly complied with.
Please follow all instructions and take notice of all warnings.
Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING, or CAUTION. These words will be used to alert you of potential hazards that injure you and others.
Following these instructions will tell you how to reduce the chance of injury and the possible dangers if instructions aren’t followed.
This symbol alerts you to take care as the appliance contains flammable materials: isobutane as refrigerant and cyclopentane as insulation blowing gas. Do not expose it to high heat, sparks, and open flames.
The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a gas with a high level of environmental compatibility, which is flammable. During transportation and installation of the appliance, make sure that none of the components of the refrigerant circuit become damaged.
WARNING: Never use an appliance with a damaged refrigerant circuit. If the refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate the room in which the appliance is located.
It is dangerous for anyone other than an authorized service person to work on this appliance. In Queensland, the authorized service person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants to carry out servicing or repairs that involve the removal of covers.
The room for installing the appliance must be at least 1m³ per 8g of refrigerant. The amount and type of refrigerant in the appliance can be found in the Technical Specifications at the back of the manual and on the appliance rating label.

GENERAL SAFETY INSTRUCTIONS (Cont.)
This appliance is intended to be used in household and similar applications such as:

• staff areas in shops, offices, and other working environments;
• farmhouses and by clients in hotels, motels, and other residential type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications
  

R600A WARNINGS
NOTE: This model uses 0.070Kg of R600a flammable refrigerant in its sealed system. The following must be observed for your safety:
R600A Refrigerant Warning

• This appliance contains a small quantity of R600A refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor
  does it increase the greenhouse effect?

• During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.

• Leaking refrigerant can ignite and may damage the eyes.

• In the event, any damage does occur, avoid exposure to open fires and any device which creates a spark. Disconnect the appliance from the mains power.

• Thoroughly ventilate the room in which the appliance is located for several minutes.

• Notify Customer Service for necessary action and advice.

• The room for installing the appliance must be at least 1 cubic meter per 8 grams of refrigerant. The refrigerant quantity contained in this appliance is listed above in grams; it is also noted on the Rating Plate of the appliance.
  It is hazardous for anyone other than an Authorised Service Person to carry out servicing or repairs to this appliance. In Queensland, the authorized person must hold a Gas Work Authorisation for hydrocarbon refrigerants, before carrying out servicing or repairs which involve the removal of covers.

WARNING

1. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
2. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
3. Do not damage the refrigerant circuit.
4. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
5. Do not store explosive substances such as aerosol cans with a flammable propellant in the appliance.

The environment and personal safety must be considered when disposing of this appliance. Please ensure the appliance is taken to a recycling center for safe recycling. DO NOT dispose of the appliance in landfills as the insulation and refrigerant gas contained in these appliances are flammable.
To reduce the risk of fire, electric shock, or injury, always follow these basic precautions and accident prevention measures when using this appliance, including the below:
INSTALLATION

• Heavy: The product is heavy, be careful when moving it. To avoid back or another injury, have 2 people lift or mechanical aid when installing.

• Damage: When unboxing, thoroughly inspect the appliance carefully for any damage. If there is any damage, do not install the appliance. Contact our
  support center at info@ayonz.com for advice.

• Protection from moisture: Make sure the appliance is installed in an indoor area away from wind, rain, water spray, or drips.

• Protect from heat: Do not place the appliance next to an oven, grill, or another source of high heat, or where it will be exposed to direct sunlight for long
  periods of time.

• WARNING: Ventilation: Make sure to have enough ventilation, keep any ventilation openings, in the appliance enclosure or in the built-in structure,
  clear all obstructions. Make sure plenty of air circulation around the appliance to prevent overheating.

• Level: Install appliance level in order for proper operation.
  ELECTRICAL SAFETY

• Voltage: Plug the appliance into a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order.

• Power connection: Do not use an adaptor or an extension cord. Plug the power plug directly into a separate PowerPoint that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed.

• Power cord: Do not kink or damage the power supply cord. Make sure it is behind the appliance so no one can step on or place anything on the power
  supply cord or against it. A damaged power plug may overheat and cause a fire.

• Damaged cord: Do not use a cord that shows cracks or abrasion damage. Any damage to the cord may cause a short circuit, fire, and/or electric shock. Contact our support center at info@ayonz.com for advice

• WARNING! The light supplied with this appliance cannot be replaced by the user. Contact the authorized service agent for replacement or service.

• Disconnection: Never pull the power cord to unplug the appliance. Grip the plug and pull it straight out from the PowerPoint.

• Electrical work: If the installation of this appliance requires any electrical work, make sure it is carried out by an electrician.

Warning!

1. Do not locate multiple portable socket-outlets or portable supplies at the rear of the appliances.
2. When positioning the appliance, ensure the supply cord is not trapped or damaged.

USAGE CONDITIONS AND RESTRICTIONS

• Children: Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.

• Usage restrictions: The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.

• Indoor domestic use only : Only for indoor domestic use only, such as in
  households, kitchen areas in shops, offices, and in other working environments, used by clients in hotels, motels, bed and breakfast establishments, and in catering and similar non-retail applications. It is not to be used for industrial or
  commercial use.

• Intended purpose: Do not use this product for anything other than its intended purpose, and only use it as described in this manual. Do not attempt to alter or modify this appliance.

• WARNING! Do not use any electrical or electronic appliances inside the food storage compartments of the appliance, unless they are of the type
  recommended by the manufacturer.

CLEANING AND MAINTENANCE

• Flames: Do not allow open flames or ignition sources to enter the appliance.

• Disconnect: Make sure to unplug the appliance before cleaning or servicing. Failure to do so can result in electric shock, injury or death. Do not connect or disconnect the plug when your hands are wet.

• Flammable/explosive substances: Do not store flammable or explosive substances such as aerosol cans with a flammable propellant in this appliance.

• Solvents : Do not use solvent-based cleaning products or abrasives on the interior.

• WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer

• Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so. All other servicing is to be done by a qualified technician or contact our support center at info@ayonz.com for advice.
  RESPONSIBLE DISPOSAL

• Do not throw this appliance out with your household rubbish. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of them appropriately.

PRODUCT OVERVIEW

• INSTALLATION
• Safety first: Before installing your new bar fridge, read all safety instructions in this manual, especially the sections on electrical safety and installation.
• Do not tilt the appliance more than 45º from upright when moving.
• This appliance is designed to be freestanding only and is not be recessed or built-in.
• Do not apply force to any part such as the condenser or door.
• Place the bar fridge on a strong, level floor that is solid enough to support the unit when it is fully loaded.
• To fix the balance, Adjust the leveling legs at the bottom of the appliance.
• Ensure there is nothing that could prevent the door from closing.
• SPACING: Allow 10cm clear space between the back and 5cm on the sides of the appliance and your wall or anything else to make sure there is enough air circulation, which is needed to allow for the cooling of the compressor and condenser.
• If you have to position the refrigerator on the carpet, use a plastic carpet protector underneath the appliance.

BE SURE TO PLACE APPLIANCE:

• Away from direct sunlight.
• Away from sources of heat (may increase power consumption).
• An area without excessive moisture and high humidity.
  WARNING: Before you plug in the appliance, let it stand upright for 2 hours. This will allow the refrigerant gases to settle into the compressor and reduce the possibility of a malfunction in the cooling system from the transportation.

INSTALLATION (cont.)
LEVELLING THE REFRIGERATOR

LEVELLING THE DOORS
This refrigerator comes with three C-type washers (pic1), which you can use to realign the fridge compartment (upper) doors. They may be slightly out of alignment after delivery, or after you have loaded items on the door balconies.

Should the doors need to align, please see the following steps:

1. Before checking the door alignment, make sure that the appliance is standing level and upright.
2. If the top of the two upper doors looks out of line, slightly lift the lower part of the door and use pliers > insert 1 x C-type washer between the bottom of the door and the middle hinge.

WARNING!
Please be careful so that you do not get your fingers caught between the doors. Use a tool to avoid injury. Keep the C-type washers out of children’s reach. They are small parts and could easily be swallowed.

CONTROL PANEL
The control panel display lights up for 2 minutes once the door of the fridge or the freezer compartment is opened or when any control is pressed.
On the first connection, the display shows the factory default temperatures for the fridge/freezer compartments. During normal operation, the temperature
display of the fridge and freezer compartments shows the temperature of the current settings.
The control panel will be locked automatically 25 seconds after the last control panel action, and the control panel illumination will turn off after 2 minutes.

DISPLAY:

1. Refrigerator Icon
2.  Freezer icon
3. Super Cool/Freezing icon
4. Temperature Display
5. Fruit/Vegetable icon
6. Meat icon
7. Drink icon

CONTROLS:
a. Temperature Up
b. Temperature Zone
c. Temperature Down
d. Super Cool/Super Freeze
e. Variable Temperature
f. Lock/Unlock

CONTROL PANEL (Cont.)
TEMPERATURE SETTING FOR REFRIGERATOR
Press the Temperature Zone selection button to choose the setting temperature zone of REFRIGERATOR, then press the UP or DOWN arrow buttons to adjust the temperature setting. The temperature range is from 2°C to 8°C
TEMPERATURE SETTING FOR FREEZER
Press the Temperature Zone selection button to choose the setting temperature zone of FREEZER, then press the UP or DOWN arrow buttons to adjust the temperature setting. The temperature range is from -24°C to -16°C
VARIABLE ZONE (VEGETABLE/MEAT/DRINK ZONE)
Press the “VARIO TEMP” button to adjust the left compartment located inside the refrigerator (marked below). The Meat icon for meats, Vegetable icon for Fruit/Vegetables and Drink icon for Drinks.

SUPER COOL MODE
When the super cool mode is set, the temperature of the refrigerator will automatically be set to 2°C. The super cool mode ends after 6 hours. Press Super Cool again to exit if you want to end the mode earlier.
SUPER FREEZE MODE
When the super freeze mode is set, the temperature of the freezer will automatically be set to -24°C. Super freeze mode ends after 24 hours. Press Super Freeze again to exit if you want to end the mode earlier.

OPERATIONS

CONTROL PANEL LOCK

• Touch and hold the UNLOCK control for 3 seconds until a beep occurs and the control panel is now locked.
• To Unlock the control panel before any operation, touch and hold the UNLOCK control for 3 seconds until a beep indicates that the control panel is
  now unlocked.

TROUBLESHOOTING

of refrigerating chamber
E2| Temperature sensor failure of the freezing chamber
E3| Temperature sensor failure of the variable temperature chamber
E4| Failure of defrosting sensor in refrigerating chamber
E5| Freezing defrost sensor detection circuit error
E6| Communication error
E7| Circulation of temperature detection circuit error
EH| Moisture sensor error

SPECIFICATIONS

CUSTOMER HELPLINE :
info@ayonz.com
DISTRIBUTED BY:
Anyone Pty Ltd

CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>