Royche 2AXYZ-TAN-RMS Wireless Mouse User Guide

June 6, 2024
Royche

i330
2AXYZ-TAN-RMS
ZM7.0
2AXYZ-TAN-RCV

Packaging incudes

  • Wirless Mouse
  • Mini receive
  • 1 section of AA alkaline batteries
  • Fast operation guide

  1. Open the battery cover and power switch to on
  2. Insert the battery (positive and negative correct)
  3. Remove the connector
  4. Insert the computer USB interface

Product features

2.4G product features/2.4G

Wireless transmission of 20m /20m

Without any interference within the scope of 20m of 360 degrees, the 2.4GHz wireless technology can provide reliable connections.

Precise positioning of DPI /DPI

High precision switchover of game 1600DPI, which can ensure the quick positioning of objects in the game.

Long battery life

Compared with the ordinary wireless mouse, this mouse adopting a new generation of low power technology can save power by five times, the battery life is up to 18 months, which will avoid the annoyance of regular battery replacement

High rate of return of 250Hz /250Hz

The rate of return means the data transmission speed between the mouse and the computer. However, the rate of return of 250Hz means that the wireless mouse has no delay and frame skip in the fierce game, which is more significant for game players.

Data parameter

2.4G data parameters

Basic parameters

Wireless data transmission: 1Mbps Frequency:

2402MHZ-2480MHZ

Channel: 16

Engine: Optical

Distance: 20m

Working voltage: 1.5V

Working current: 11mA

Lifetime of the mouse key: Over 3 million times

Mouse size: 110x60x31mm

Mouse tracking performance

Mouse resolution: 1600DPI

Mouse rate of return: 250Hz

Current of mouse step work

Working current =5mA

Standby current =0.1mA

Sleep current: 50uA

State of no receiving <30uA

System combination

IBM or compatible calculator

Windows:2000/ME/XP(X64)/Vista/7/8/10

Mac OS X(More than V10.4)

A workable USB interface

FCC STATEMENT:

Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.
  • This device has been evaluated to meet general PF exposure requirement. The device can be used in portable exposure condition without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Pules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measure&

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Warranty term

The equipment is provided with a limited product hardware warranty service for 1 year
from the date of purchase.

Security reminder

Please do not open or repair the equipment. Please do not use the equipment in a wet
environment. Please wipe the equipment using the dry cloth.

Warranty restrictions

The limited warranty doesn’t cover the problems or damages due to the following causes:

  • Accidents, misuse, improper operation, or any unauthorized maintenance, modi­cation or dismantling;
  • Improper operation or maintenance, violation of the product description during the application or improper connection of voltage source;

Compensation

  • In case of quality problems within 7 days, according to the “three guarantees” stipulated by the country, the hardware will be returned to the purchase place under the intact appearance and packaging of the product, and the payment for the bought hardware will be returned when presenting the valid voucher for purchase.
  • In case of quality problems within 60 days, the hardware product can be replaced at the purchase place or repaired at the specifi­ed repairing block, and the expiration date of the replaced hardware is the remaining days.
  • In case of quality problems within 1 year, the product can be repaired at the specifi­ed repairing block.

warranty period|
---|---
Date of purchase|
Where to buy|
Product Serial Number|
Product Number|
stamp|

date

|

Maintenance situation

---|---
|
|
|
|
****|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals