Peers Hardy Uk SB1008 Smart Watch User Manual
- June 6, 2024
- Peers Hardy Uk
Table of Contents
Peers Hardy Uk SB1008 Smart Watch
Quick start guide
Overview
- Screen
- Touch key
- Charging POGO PIN
- Make sure the POGO-pins on the charging cable fit correctly onto the charging terminals on the back of smart watch.
- Plug the big end of the USB cable to a power source and after successful charging, a charging icon will appear on the screen.
Install “Orunning” app on the phone
Search and install the “Orunning” app from Google Play or App Store. Or scan
the following QR code to install the app directly.
Connect the smart watch with the phone
- Enable Bluetooth on your smart phone.
- Open the “Orunning” app on your smart phone, and then fill in all the requested information in the “Settings” menu.
- Tap “Connect device” in the “Settings” menu.
- Select the smart watch icon to connect.
- Choose your device name to connect it with your phone.
Unbind smart watch with mobile phone
- Open “Orunning” app on your smart phone.
- Tap “Disconnect device” in the “Settings” menu and confirm “OK”.
- To disconnect your smart watch with an iPhone, click “Disconnect device” in the “Settings” menu of
“Orunning” app, and go to the Bluetooth settings on your iPhone, then access and select “Forget This Device”.
Operation Introduction
- To switch on the watch, press and hold the touch key until the display is on.
- To switch off the watch, press the touch key repeatedly until “more” icon shows on the display and then long press to enter in “Power off”, long press the touch key again.
- You can press the touch key, or turn on gesture control in advanced settings of Orunning and raise your hand to light the screen.
Functions
Watch face
There are
3 watch faces. In the current watch face, press and hold the touch key to
choose the one you like.
Daily activities
The watch will record your daily activity
automatically. Press the touch key to check pedometer, distance and calories.
After synchronizing with Orunning, these sports data can be also checked in
Orunning.
Sports
Press the
touch key repeatedly until Sports icon shows on the display and long press the
touch key to enter in the multi-sport mode.
The smart watch has 4 sports modes: Walking, Running, Cycling and Hiking. Long
press touch key to choose one of them and then do sports. The smart watch will
record your sports data.
When you finish your sports, you can long press the touch key twice to stop
your sport and save the sports data. If you’ve connected your smart watch with
the
“Orunning” app via Bluetooth, you can also check your sports data in the app.
Note: If the exercise time is less than 5 minutes, the data cannot be
saved.
Sleep status
Wear the watch to fall asleep during 9:00 p.m. to 9:00 a.m.; the watch can
record your sleep data of last night on the next day. Press the touch key
repeatedly to check the sleep data.
Message
Unread messages will be displayed in “Message” interface. Long press the touch
key to enter in and read the messages on the watch.
Weather
After connecting with Orunning, you can select city in advanced settings of
the app. And the weather of this city will be displayed on the watch.
More
Press the
touch key repeatedly until “More” icon shows on the display and long press the
touch key to enter in “Power off”, “About”, “Find Phone” and “Reset”.
Power Off Long press the touch key to turn off the watch.
About Long press the touch key, you can check watch name, BT marc address and firmware version of your watch.
Find Phone
After
connecting with Orunning, you can look for your phone by long press the touch
key.
Reset Long press the touch key, your watch will be reset and restart.
Sedentary reminder
Turn on
the sedentary reminder you’ve set in Orunning. When the time is up, your watch
will vibrate to remind you to do some sports.
Remote capture After successfully connecting with Orunning, choose “Take
pictures” in Orunning, and then short press the touch key to take photos, and
long press the touch key to exit.
Notifications
After successfully connecting with Orunning, turn on “Notifications” in
Settings, you will receive these notifications on your watch.
More functions
Enjoy more smart functions in Orunning.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>