PRODA PD-BH200 Kamen Neckband Wireless Earphone Instruction Manual
- June 6, 2024
- PRODA
Table of Contents
PRODA PD-BH200 Kamen Neckband Wireless Earphone Instruction Manual
PD-BN200
Cautions
To use the headphone properly, read this manual first. Keep this manual for future reference
- Do not listen to headphones for long hours. Listening at safe volume levels;
- Do not use headphones in a potentially hazardous environment;
- Do not use headphones to listen to music, make or receive calls while driving;
- Keep the headphones out of the reach of children to avoid the danger caused by improper use of children;
- Keep headphones away from water to avoid damaging the sound quality of the headphones;
- lt’s dangerous that listening at high volume makes you not hear the sound around. If you have tinnitus or feel the volume is too high, adjust the volume to an appropriate level;
- lf you feel uncomfortable, irritation or any adverse reactions when using the headphones, stop using them immediately;
- Avoid storing or using headphones at temperatures below -10 °C (14 ° F) or above 50 °C (122″ F}, which may shorten the headphone life or battery life;
Introduction to Headphones
Headphone instructions
Power on: In the off state; long press the switch button for 2 seconds
Shutdown: Power on/matched connection status; long press the switch
button for2-3 seconds
Answer the call: The caller rings; click the switch button once
End the call: During the call; click the switch button once
Redial: In the connected state; double-click the switch button
Reject the call: The caller rings; press and hold the switch button for
1.5 seconds to release
Cancel the call: When the power is off, click the switch button once.
Play music: Standby connection mode; click on the switch button
Pause music: During music playback; click on the switch button
Volume adjustment: during music playback/calling; click volume plus or
minus button
Switch the top and bottom: Music playback; long press the volume plus or
minus button for 1.5 seconds (plus: previous song; minus: next song)
Disconnect: tn the connected state; click the corresponding pairing name
on the phone to select the disconnect/long press the switch button for 3.5
seconds.
Back connection: In the off state; long press the switch button for 1.5
seconds (automatically return to the last connection record)
One for two (one headset with two phones at the same time):
A mobile phone is connected
Turn off the A mobile phone Bluetooth, double-click the switch button to enter
the pairing state to connect the B phone then turn on the A
The Bluetooth function of the phone is automatically connected (some phones
need to be manually clicked)
Headset overview
To disconnect your phone from the headphone, try one of the following methods:
Press and hold MFB Button until the red indicator is on for 1 second, and then the headphone is turned off;
Keep the headphone at least 10 meters (approx. 30ft) away from your phone.
Reconnect the paired headset to your phone:
- Make the BT headphone as closer as possible to your phone(or other device used for connection) within 1 metro.
- Turn on the headphone, and it enters reconnection mode. The white indicator flashes;
- Turn on the BT function of your phone (or other device used for connection). The headphone will automatically reconnect with the previously connected phone;
Answer call:
When you hear a prompt tone, click MFB Button to answer the incoming call. Or
answer it through your phone;
Reject call:
When you hear a prompt tone, double-click MFB Button to reject the incoming
call. Or reject it through your phone;
Hang up:
Click MFB Button to hang up the on-going call. Or hang up through your phone.
Last called number redial:
In standby mode, double-click MFB Button to redial the last called number.
Play/pause:
Click MFB Button to play or pause the music.
Volume and song:
When playing music, click Volume+ Button /Volume- Button to adjust the volume.
Press and hold Volume(+) Button for 2 seconds to go to the previous track.
Press and hold Volume(-) Button for 2 seconds to go to the next track
Q & A
1. Q: The PD-BN200 cannot be paired with a mobile phone?
A: Please check if the headphone is in the pairing or connection mode.
Check if the phone’ s BT function is turned on. Delete “PD-BN200” on the BT
menu of your device and then follow the instructions to connect the headphone
one more time.
2. Q: The PD-BN200 cannot be turned on?
A: Check the remaining battery.
3. Q: Is the PD-BN200′ s battery replaceable?
A: No. This headphone uses a non-removable lithium polymer battery.
4. Q: Can I use the BT headphone when I’ m driving?
A: Use a communication headphone while driving. It is not recommended to
use an over-ear headphone or on-ear headphone.
5. Q: Is the PD-BN200 disconnected from the phone at 10 meters?
A: Since BT is a wireless technology, it ls sensitive when objects are
between the headphone and the connected device. Check if there are metals or
any other objects that affect the connection within the connection range.
6. Q: After the headphone is connected to the computer or mobile phone, I
can’t I hear any sound?
A: Check if the computer output channel is set to BT audio device and
whether the computer’s BT supports A2DP protocol. Check the volume of the
computer/phone.
7. Q: The PD-BN200 cannot be paired with a mobile phone?
A: Since the software settings are different from device to device, the
functions of some applications cannot be controlled by the headphone.
Technical Specifications
- Bluetooth version: VS.O
- Communication distance: 10 meters
- Receive sensitivity: -89dbm
- Working frequency band: 2.4GHZ
- Standby time (link status): About 60 hours
- Talk time: about 12 hours
- Listening to song time: about 12 hours
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read More About This Manual & Download PDF: