3P Technik 311000560 Telescopic Extension Instructions
- June 12, 2024
- 3P Technik
Table of Contents
Telescopic Extension
Rainwater and Hydrosystem 400 filter extension to be used within the ground or to extend the shaft of the filter. The telescopic extension locks into place on the filter that it extends using the same twist lock system that the original lid from the filter used. The lid is sold separately or you can use the existing lid from the filter that you are extending. Can be used with the Volume Filter (VF1), Garden Filter, Attenuation Filter, or either version of the Hydrosystem 400 stormwater filter. The shaft of the telescopic extension has two sets of ribs that allows it to be backfilled around and keeps it in place from sliding. For the best installation, please use stainless steel set screws to screw the shaft in place when the optimal height is achieved.
- Low maintenance; Locking Lid Sold Separately (Can use lid from the filters that it extends)
- Food grade high quality polyethylene construction
- Telescopic Extension Plastic (PE) shaft for the installation on Volume Filter (VF1), Garden Filter, Attenuation Filter, and Hydrosystem 400 Filter directly into the ground
- Adjustable Height from 14.5in. to a Total height of 22in. (Must use a set screw system which is not included)
SPECIFICATIONS
DIMENSIONS INCHES
Product Depth
Product Height| 21.00
14.50 to 22.00| Product Width| 21.00
---|---|---|---
DETAILS| Polyethylene|
Material| | |
1 Year Warranty (a) All New Goods carry a 1-year RTB (Return To Base) warranty
unless otherwise stated in writing, commencing from the date of purchase. (b)
All Second Hand Goods carry no warranty unless otherwise stated in writing.
(c) All
Reconditioned Goods carry no warranty unless otherwise stated in writing.