polk ES60 Full Range Passive Floor Standing Loudspeaker Owner’s Manual
- June 6, 2024
- polk
Table of Contents
polk ES60 Full Range Passive Floor Standing Loudspeaker Owner’s Manual
Click here!
On-line service parts list
https://dmedia.soundunited.com/documents/details/28314
SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
CAUTION Please heed the following cautions and instructions during servicing and inspection.
-
Heed the cautions!
Cautions which are delicate in particular for servicing are labeled on the cabinets, the parts and the chassis, etc. Be sure to heed these cautions and the cautions described in the handling instructions. -
Caution concerning disassembly and assembly!
Through great care is taken when parts were manufactured from sheet metal, there may be burrs on the edges of parts. The burrs could cause injury if fingers are moved across them in some rare cases. Wear gloves to protect your hands. -
Use only designated parts!
The set’s parts have specific safety properties (fire resistance, voltage resistance, etc.). Be sure to use parts which have the same properties for replacement. The burrs have the same properties. In particular, for the important safety parts that are indicated by the z mark on schematic diagrams and parts lists, be sure to use the designated parts. -
Be sure to mount parts and arrange the wires as they were originally placed!
For safety seasons, some parts use tapes, tubes or other insulating materials, and some parts are mounted away from the surface of printed circuit boards. Care should also be taken with the positions of the wires by arranging them and using clamps to keep them away from heating and high voltage parts, so be sure to set everything back as it was originally placed. -
Make a safety check after servicing!
Check that all screws, parts and wires removed or disconnected when servicing have been put back in their original positions, check that no serviced parts have deteriorated the area around. And otherwise check that safety is ensured.
CAUTION Concerning important safety parts
Many of the electric and the structural parts used in the set have special safety properties.
In most cases these properties are difficult to distinguish by sight, and the use of replacement parts with higher ratings (rated power and withstand voltage) does not necessarily guarantee that safety performance will be preserved. Parts with safety properties are indicated as shown below on the wiring diagrams and the parts list in this service manual. Be sure to replace them with the parts which have the designated part number.
Parts lists Indicated by the z mark.
The use of parts other than the designated parts could cause electric shocks, fires or other dangerous situations.
WARNING:
DO NOT return the set to the customer unless the problem is identified and
remedied.
ONLINE PARTS LIST
Accessing the Parts List
-
Access from the Service Manual
- Click the URL link on the cover of the service manual. Examples of display.
NOTE : If the web browser does not open automatically, copy the URL and paste it into the address bar of the web browser and then press Enter.
- Click the URL link on the cover of the service manual. Examples of display.
-
Accessing the Part List from the Model Asset Screen.
- Display Model Asset from New SDI.
- Click the section displayed as ▼ Link to Part Lists under the model name.
NOTE : If the ▼ Link to Parts List section is not displayed, download the parts table from the Asset list.
Searching Part Numbers or Ref. Numbers
You can search a Parts List for part numbers or Ref. numbers.
-
Enter the part number or Ref. number in the search window of the Parts List, and press the search button.
-
The search results are displayed.
The name of the sheet in which the search part is used and the part’s line are displayed. -
Next, click the “Sheet” section of the search results.
NOTE FOR PARTS LIST
- Parts indicated by “nsp” on this table cannot be supplied.
- When ordering a part, make a clear distinction between “1” and “I” (i) to avoid mis supplying.
- A part ordered without specifying its part number can not be supplied.
- Part indicated by “@” mark is not illustrated in the exploded and packaging view.
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
SERIAL NUMBER
Serial Number Organization
The 13-digit serial number that contains the code of the manufacturing date.
13 digits
SKU Code of this Unit
SKU Code | NAV Number | Product Name | Description |
---|---|---|---|
PBLM | 300369-01-00-005 | SIGNATURE ELITE ES60 | Blk |
PBLN | 300369-03-00-005 | SIGNATURE ELITE ES60 | Wht |
PBLP | 300369-14-00-005 | SIGNATURE ELITE ES60 | Brn |
TECHNICAL SPECIFICATIONS
Model name | ES60 |
---|---|
Transducers
| Tweeter| 1–1 in Terylene High-Res Dome Tweeter
| Mid-Bass Woofer| 3–6.5 in Dynamic Balance Mica Reinforced
Polypropylene Drivers
| Crossover Frequency| 2.0 kHz
| Wall Mounting Option—
Key Hole slot
|
| Wall Mounting Option—1/4″-20
Threaded Insert
| –
General
| Recommended Amplification
(wpc)
| 50–300
| Impedance|
| Overall Frequency Response| 32 Hz–40 kHz
| Sensitivity| 90 dB
| Electrical Inputs| Dual gold-plated 5-way binding posts
Dimensions
| Width / Depth / Height| 215.9mm 8.5 “ X 399.6mm 15.7 “ X 1129.1mm
44.5 “
| Weight| 52 LBS / 23.6 Kg
Shipping|
| CARTON| PACKAGED
| Width / Depth / Height| 383mm 15.1 “ X 512mm 20.2 “ X 1213mm
47.8 “
| Weight| 58 LBS / 26.3 Kg
EXPLODED VIEW
Parts List : https://dmedia.soundunited.com/documents/details/28314
SECTIONAL VIEW
PACKAGING VIEW
Parts List : https://dmedia.soundunited.com/documents/details/28314
Revision History
Ver
| Page| Description| Before the change| After the change| Date
---|---|---|---|---|---
–| –| 1st version issued| –| –|
1 Jul. 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>