JBL EON One All-in-One Linear-Array P.A. System with 6-Channel Mixer User Guide

BLUETOOTH AUDIO
ONE HAND CARRY
LEGENDARY JBL SOUND
QUICKSTART GUIDE

LISTENING CONFIGURATIONS

BLUETOOTH AUDIO STREAMING

This device supports Bluetooth audio streaming. To connect your device:

1. Turn on Bluetooth on your source device.
2. Press the BLUETOOTH PAIR BUTTON (M).
3. Find JBL EON ONE on your device and select.
4. The BLUETOOTH LED (K) will change from blinking to solid-state.
5. Enjoy your audio!

POWER IT ON

1. Confirm the Power Switch (S) is in the OFF position.
2.  Connect the supplied power cord to the Power Receptacle (H) on the rear of the speaker.
3. Connect the power cord to an available power outlet.
4. Flip on the Power Switch (S); the Power LED (I) and the Power LED on the front of the speaker will illuminate.

PLUGIN THE INPUTS

1. Turn the Channel Volume Controls (E) and Master Volume Control (L) all the way to the left before connecting any inputs.
2. Connect your device(s) via the input jacks provided and/or Bluetooth.
3. If CH1 or CH2 input is being used, select MIC or LINE via Mic/Line Button (F).

SET OUTPUT LEVEL

1. Set the level for the inputs using the Channel Volume Controls (E) . A good starting point is to set the pot(s) at 12 o’clock.
2.  Slowly turn the Master Volume Control (L) to the right until the desired volume is reached.

Please visit jblpro.com/eonone for complete documentation.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA
© 2016 Harman International Industries, Incorporated

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>