BRISTAN BNA568 Bath Filler and Pop Up Waste with Overflow User Guide
- June 6, 2024
- BRISTAN
Table of Contents
BNA568 Bath Filler and Pop Up Waste with Overflow
User Guide
IMPORTANT: Please keep these instructions for future reference and request of replacement parts
Introduction
Thank you for choosing Bristan, the UK’s leading taps, and showers expert. We
have designed this product with your enjoyment in mind. To ensure that it
works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need
and, if you need any further help, please do not hesitate to give us a call on
0330 026 6273.
Installation
- Identify all components that are present prior to installation.
- Fit the waste body (8) and flange (6) to the bath securing using screw (4) and washer (2); ensure sealing washer (7) is placed through the bath before this is done as shown on the diagram. Use a pure Silicon sealant where necessary.
- Fit the overflow/filler elbow (19) to the bath ensuring overflow washer (18) is in place. Secure to bath using o-ring (21), washer (22), and retaining nut (25). Use a pure Silicon sealant where necessary.
- Connect flexible tube (16) to the waste body (8) using the plastic nut (14).
- Connect the overflow elbow (17) to the flexible tube (15).
- Fit the handle (26 & 27) to the control spindle by pushing on firmly.
- Connect water supplies to inlets. The elbows (19) are 3/4” BSP. Two flexible connectors are supplied that can be used to connect the elbows to 22mm pipework, depending on the installation. A blanking plug is also supplied to close off one inlet if mixed water is to be connected to the overflow filler.
- Check all joints and connections for leaks.
Contents:
| 1. Cover | 16. Pop-Up Assembly |
|---|---|
| 2. Sealing Washer | 17. Overflow Elbow |
| 3. Adjusting Nut | 18. O Ring |
| 4. Adjusting Screw | 19. Filler Elbow |
| 5. Flange Screw | 20. End Stop |
| 6. Flange | 21. Rubber Washer |
| 7. Sealing Washer | 22. Washer |
| 8. Waste Body | 23. Washer |
| 9. Conical Washer | 24. Filler Outer |
| 10. Plastic Nut | 25. Lock Nut |
| 11. Plastic Bush | 26. Handle Cover |
| 12. Conical Washer | 27. Handle Lever |
| 13. Plastic Washer | 28. Rubber Washer |
| 14. Plastic Nut | 29. Bubbler |
| 15. Plastic Tube | 30. Outlet Nozzle |
Cleaning & Maintenance
Your fitting has a high-quality finish and should be treated with care to
preserve the visible surfaces. All finishes will wear if not cleaned
correctly. The only safe way to clean your product is to wipe it with a soft
damp cloth. Stains can be removed using washing-up liquid. All bathroom
cleaning products (powders and liquids) will damage the surface of your
fitting, even the non-scratch cleaners.
NOTE:- Never use abrasive detergents or disinfectants or those containing
alcohol, hydrochloric, or phosphoric acid.
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
To start your free guarantee, simply scan the QR code and register your
product. Alternatively, visit
www.bristan.com/register to register your
product via a computer.
http://www.bristan.com//register
For full guarantee terms and conditions visit,
www.bristan.com/guarantees
This booklet covers product codes
W BATH09 C – Chrome
Helpline
0330 026 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco Company
Website: www.bristan.com
Telephone: 0330 026 6273
Email: enquire@bristan.com
FI ( BATH FILL)
REV. D4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>