AUTEL DR2011 Smartphone Code Reader User Guide
- June 6, 2024
- AUTEL
Table of Contents
Quick Reference Guide
Email: [email protected]
Web: www.autel.com
PROFESSIONAL CODE READER
AL1 Lite
Thank you for purchasing the Autel tool. This tool is manufactured to a high standard and will provide years of trou be-free performance when used in accordance with these instructions and properly maintained.
Getting Started
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Failure to use this unit correctly may cause damage and/or personal injury and will void the product warranty.
https://www.autel.com/maxiap2500/index.html
Search for Autel Link in the Google Play Store or App Store to down load
and install the app to your device, or scan the above QR code to download the
Autel Unk app.
In the Android system, you will be directed to Google Play, while iOS users
will be directed to the App Store.
Open the Autel Link app and tap Register in the middle of the screen. Follow the on-screen instructions to complete the registra on. Log in with your registered email address/phone number and password
On your device, tap Me > Device Manager > Binding Equipment, the device will automatically jump to the next screen. Tap to scan the QR code imprinted on the AL1 Lite tool.
After the scanning is complete and the serial number is automatically retrieved, tap the Bind Equipment button at the bottom of the screen to proceed. Tap the tool name — AL1 Lite to enter the next screen.
Connect the OBDII cable’s 16-pin male adapter to the vehicle’s Data Link
Connector (DLC), which is generally located under the vehicle dashboard.
The tool will be automatically powered on.
Your AL1 Lite is now ready to use.
Tap the Connect Device button at the bottom of the screen to connect the device. Once connected successfully, tap the Firmware Upgrade button to update the firmware
Connect to the Vehicle
Scan QR Code to visit our website at www.autel.com
To update the firmware, please create an Autel ID and register the product with the device’s serial number and password, which can be found by tapping the Setup > About buttons on the tool screen.
Connect the OBDII cable’s 16-pin male adapter to the vehicle’s Data Link Connector (DLC), which is generally located under the vehicle dashboard.
The tool will be automatically powered on Your AL1 Lite is now ready to use
NOTE: The interfaces in this quick guide are for reference only.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
For service and support, please contact us.
http://pro.autel.com / www.autel.com /
[email protected]
0086-755-2267 -2493 (China HQ) / 1-855-AUTEL-US (288-3587) (North America)
0049 (0) 6103-2000520 (Europe)/ +045 5948465 (APAC) / +971 585 002709 (IMEA)
©Autel Intelligent Technology Corp., Ltd. All Rights Reserved.