knog Bilby and Bilby Run User Guide

June 6, 2024
knog

knog Bilby and Bilby Run User Guide

knog Bilby and Bilby Run User Guide

GET STARTED

Bilby comes locked To unlock hold both buttons for 3 seconds

OPERATION

Turn On: Long press of button 1
Turn Off: Press and hold both buttons

WHEN LIGHT IS ON

knog Bilby and Bilby Run User Guide - When Light is on

WHEN LIGHT IS OFF

knog Bilby and Bilby Run User Guide - When Light is
off

CHARGING

Fully charge the Bilby before the first use. Pop out the inner pod to access the USB. Then charge in any USB charge port. Charge time; 4 hr.

knog Bilby and Bilby Run User Guide - Charging

ADJUSTABLE HEADSTRAP

knog Bilby and Bilby Run User Guide - Adjustable
Headstrap

CHECKING BATTERY LEVEL

The reading lights show the battery level. When Bilby is turned off, quick press any button.

knog Bilby and Bilby Run User Guide - Checking Battery
Level

LOCK

If you accidentally press any button when the Bilby is locked the red light will flash twice. To lock/unlock: Hold both buttons for 3 seconds. White light will flash twice to show that Bilby is unlocked. Red light will flash twice to show that Bilby is locked.

knog Bilby and Bilby Run User Guide - Lock

MODES

Short press of button 1 to scroll through modes. The light will slowly dim to extend runtime, if you wish to go back to full output of your chosen mode press the mode button once.
Modes: Spot, Wide, Low, Red, Reading

BRIGHTNESS

Short press of button 2 to scroll through brightness settings. Brightness: Max, High, Med, Low

BOOST MODES

Double click either button to activate boost mode, the Bilby will power up to maximum.

Button 1 – Spot and low (240 Lm)
Button 2 – Spot and wide (400 Lm)

The light will slowly dim to extend runtime, to boost to full output double click again.

LOW BATTERY

When the battery is low the light output with drop to increase runtime.

TILT FUNCTION

Hold down the button 1 to tilt the light down.
Hold down the button 2 to tilt the light up.

knog Bilby and Bilby Run User Guide - Tilt Function

MODE MAKER

The Bilby is compatible with the Mode Maker app to allow customisation of the light modes. Open Mode Maker, plug the USB into your computer, drag and drop the modes that you want and select upload.

CARE & MAINTENANCE

To clean: wipe with cloth, don’t use harsh chemicals, air dry, don’t sun dry.

WARRANTY

The light is guaranteed for 2 years against manufacturing defects only. See the website for more details KNOG.COM

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

knog User Manuals

Related Manuals