Knog 13300 Blinder 600 Front Bike Light User Guide
- October 30, 2023
- knog
Table of Contents
Knog 13300 Blinder 600 Front Bike Light
WHAT’S IN THE PACK
OPERATION
NOTE THE BLINDER 600 IS PACKAGED IN DEMO MODE. TO ENABLE THE FULL FUNCTION OF THE LIGHT, CONNECT IT TO A USB-C CHARGER.
POWER BUTTON
- LONG PRESS (2 SECS) – ON/OFF
- QUICK PRESS – CHANGE MODE
- DOUBLE PRESS – TOGGLE BETWEEN STEADY & FLASH MODES
QUICK PRESS WHEN OFF TO CHECK THE BATTERY STATUS
CHARGING
LIFT THE CHARGING-PORT HATCH.
INSERT USB TYPE-C CHARGING CABLE.
ONCE THE CHARGE CABLE IS INSERTED, THE POWER BUTTON WILL GLOW AMBER INDICATING THE LIGHT IS NOW IN CHARGING MODE.
ONCE FULLY CHARGED, THE POWER BUTTON WILL GLOW GREEN. AFTER 1 MINUTE THE GREEN LIGHT WILL TURN OFF.
BATTERY STATUS
A QUICK PRESS OF THE POWER BUTTON WHEN THE LIGHT IS SWITCHED OFF WILL INDICATE THE BATTERY STATUS.
WHEN THE POWER BUTTON LIGHT IS FLASHING RED, THE LIGHT’S OUTPUT WILL BE REDUCED TO 30% TO PRESERVE RUNTIME.
MOUNTING
BAR MOUNT
SELECT THE CORRESPONDING HOLE TO SUIT YOUR BAR DIAMETER.
THEN PULL THE STRAP AROUND THE BAR & SECURE ON THE HOOK.
- COMPLETE MOUNTING BY PULLING UP ON THE TAB WHILE APPLYING DOWNWARD PRESSURE TO CLICK THE LIGHT INTO POSITION.
- MAKE SURE THE LIGHT IS SECURE BEFORE RIDING!
TO REMOVE, PRESS DOWN ON THE TAB & GENTLY PULL THE LIGHT AWAY FROM CRADLE.
UNDER MOUNT- (SOLD SEPARATELY)
LOCK THE UNDER-MOUNT.
- MAKE SURE THE UNDER-MOUNT IS LOCKED BEFORE RIDING.
- DO NOT RIDE WITH THE UNDER-MOUNT UNLOCKED!
REFER TO YOUR GO-PRO OR COMPUTER MOUNT INSTRUCTIONS TO COMPLETE THE BLINDER UNDER-MOUNT INSTALLATION.
MODES & RUNTIMES
WARRANTY
DESIGNED BY KNOG MELBOURNE, AUSTRALIA
2 YEAR WARRANTY
KNOG.COM.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>