Knog 13301 Blinder 900 Front Bike Light User Guide

October 30, 2023
knog

Knog 13301 Blinder 900 Front Bike Light User Guide
Front Bike Light

Whats In The Pack

Part
Part

Operation

Note the blinder 900 is packaged in demo mode to enable full function of the light connect it to a USB-C charger.

Power button

Long press 2 Secs –  On/Off
Quick Press – Change mode
Double Press – Toggle between steady and flash modes

Quick Press when off to check battery status

Charging

Charging

Lift the charging port hatch.

Charging port

Insert USB-C charging cable.
Insert cable

Once the charge cable is inserted, the power button will glow amber indicating the light is now in charging mode.

Once fully charged, the power button will glow Green. After 1 minute the green light will turn Off.

Battery Status

Battery Status

A wueck press of the power butto when the light is switched off will indicate the battery status.

Mounting

Bar mount
Mounting

Select the corresponding hole to suit your bar diameter.
Hold the Mount

Firmly hold the mount in place and stretch the strap downwards.
Around the Bar

Then pull the strap around the Bar and Secure on the hook.

Fit the light

Place the light in the cradle.

Complete Mounting

Complete mounting by pulling up on the tab while applying downward pressure to click the light into position.

Make sure the light is secure before riding!

To remove press down on tab and gently pull light away from cradle.

Under mount
Locked and Unlocked
Un-locked

Place the light inside the mount in the Un-locked position

Lock

Lock the under mount.

Modes and Runtimes

Mode Lumens Runtime
High 900 2hr
Medium 450 4hr
Low 200 8hr
Pulse 450 8hr
Strobe 200 16hr
Eco 130 120hr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals