knog 1300 Blinder User Guide
- October 30, 2023
- knog
Table of Contents
1300 Blinder
User Guide
What’s in the pack
OPERATION
*NOTE THE BLINDER 1300 IS PACKAGED IN DEMO-MODE. TO ENABLE FULL FUNCTION OF THE LIGHT, CONNECT IT TO A USB-C CHARGER. 
LONG PRESS (2 SECS) – ON/OFF QUICK PRESS – CHANGE MODE DOUBLE PRESS – TOGGLE BETWEEN STEADY & FLASH MODES
QUICK PRESS WHEN OFF TO CHECK BATTERY STATUS
CHARGING 
LIFT THE CHARGING-PORT
HATCH.
INSERT USB TYPE-C CHARGING CABLE. 
ONCE THE CHARGE CABLE IS INSERTED, THE POWER BUTTON WILL
GLOW AMBER INDICATING THE BLINDER IS NOW IN CHARGING MODE.
ONCE FULLY CHARGED, THE POWER BUTTON WILL GLOW GREEN. AFTER 1 MINUTE THE GREEN
LIGHT WILL TURN OFF.
BATTERY STATUS
A QUICK PRESS OF
THE POWER BUTTON WHEN THE LIGHT IS SWITCHED OFF WILL INDICATE THE BATTERY
STATUS.
WHEN THE POWER BUTTON LIGHT IS FLASHING RED, THE LIGHT’S OUTPUT WILL BE
REDUCED TO 30% TO PRESERVE RUNTIME.
MOUNTING
BAR MOUNT
SELECT THE
CORRESPONDING HOLE TO SUIT YOUR BAR DIAMETER.
FIRMLY HOLD THE
MOUNT IN PLACE & STRETCH THE STRAP DOWNWARDS.
THEN PULL THE STRAP AROUND THE BAR & SECURE ON THE HOOK. 
COMPLETE MOUNTING BY PULLING UP ON THE TAB WHILE
APPLYING DOWNWARD PRESSURE TO CLICK THE LIGHT INTO POSITION. MAKE SURE THE
LIGHT IS SECURE BEFORE RIDING!
TO REMOVE, PRESS DOWN ON TAB & GENTLY PULL LIGHT AWAY FROM CRADLE.
UNDER MOUNT 
MAKE SURE THE
UNDER-MOUNT IS LOCKED BEFORE RIDING. DO NOT RIDE WITH THE UNDER-MOUNT
UNLOCKED!
REFER TO YOUR GO-PRO OR COMPUTER MOUNT INSTRUCTIONS TO COMPLETE BLINDER UNDER-
MOUNT INSTALLATION.
MODES & RUNTIMES
| MODE | LUMENS | RUNTIME |
|---|---|---|
| High | 1300 | 1.5hr |
| Medium | 650 | 3hr |
| Low | 230 | 8hr |
| Pulse | 420 | 8hr |
| Strobe | 230 | 16hr |
| Eco | 150 | 120hr |
DESIGNED BY KNOG MELBOURNE, AUSTRALIA
2 YEAR WARRANTY
KNOG.COMx