abinGO BT60 Wireless Gaming Headset User Guide
- June 6, 2024
- abinGO
Table of Contents
BT60/Wireless Gaming Headset
Quick Start Guide
SPECIFICATION
Wireless Version: 5.0
Frequency: 2.4GHz-2.4835GHz
Working Time: 20-30 hours
Charging Time: 3 hours
Battery: 300mAh
Charging Requirements: DC5V/1A
Charging Port: USB-C
Speaker: φ50mm
Sensitivity: 120dB+-3db
Impedance: 32Ω±3Ω
Frequency Response: 20Hz-20,000Hz
Microphone: -42dB±5dB
Package Content:
① 1x BT60 Gaming Headset
② 1x USB-C Charging Cable
③ 1x AUX Cable
④ 1x Detachable Microphone
⑤ 1x 1-IN-2 Adapter
⑥ 1x Quick Start Guide
ATTENTIONS
A. Try to avoid prolonged and continuous use at high volume which can damage
your hearing, to make continuous wear hearing protection.
Try not to wear continuously for more than one hour to protect your hearing
and be better for interval wearing.
B. Do does not wear earphones while driving or cycling driving in case of
affecting safe driving.
C. Avoid placing the earphones in prolonged sun exposure, high temperature,
dusty and humid environments which will damage the wires a lot and affect the
normal use.
EARPHONES BREAK-IN & TIPS
A. Select suitable ear caps, wear them correctly and comfortably, to reduce
the noise.
B. Choose high-quality music, use thirty percent of volume to play for 12
hours.
C. Use sixty percent of volume to play for 12 hours.
D. Use the normal volume to play for 72 hours.
E. Use the eighty percent volume to play for 24 hours.
F. After the above steps, the earphone break-in can exert 90%.
IMPORTANT INSTRUCTIONS(RESPONSIBLE FOR YOUR HEARING)
| SOUND | noise level(dB) | EFFECT |
|---|---|---|
| Whisper | 30 | Very quiet |
| Quiet office | 50-60 | Comfortable hearing levels are |
| Vacuum Cleaner, Hair Dryer | 70 | Intrusive; interferes with |
| Food Blender | 85-90 | 85dB is the level at which |
| Garbage Truck, Cement Mixer | 100 | No more than 15 mins of |
| Power Saw, Drill/Jackhammer | 110 | Regular exposure to sound |
| Rock Concerts(varies) | 110-140 | The threshold of pain begins |
WARRANTY
This product is covered under warranty for a period of six months from the
date of sale limited to normal use and maintenance of the machine parts,
materials, and functions. Problems and failures verified upon further
identification, will be provided free repair and replacement parts.
Limited to the following:
A. Earphone is beyond the warranty period.
B. User does not follow the instructions so the earphone wire and earplug
broke.
C. Without the authorization to dismount, repair, alteration structures.
D. Due to natural disasters and other force majeure(such as earthquakes,
fires) product failure or damage caused.
Note: The warranty does not include product transport costs and does not provide on-site maintenance service.
ABINGO reserves all rights to clarify this warranty interpretation.
WARRANTY FEEDBACK FORM(TICK OFF)
A. No sound
B. Sound quality is bad
C. Buttons can not be operated
D. Wire damage occurred by artificial factors
E. Earplug degumming
F. Poor pin contact
G. Others
| Buying Time | Dealers of sale |
|---|---|
| Time of problems | User’s Contact info |
Shenzhen Yoro-Style Electronics Co., Ltd
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>