Pawbby MG-ZN001-EU Smart Pet Bowl/Feeder Instructions
- June 6, 2024
- Pawbby
Table of Contents
Product Overview
Please read this manual carefully before use. and retain it for future reference,
Installation and Usage
-
Clean the bowl and put it on the main unit.
-
Use screwdriver to loosen the screws of battery compartment, put three 1.5V No. 5 (AAA) batteries according to the marks of negative and positive poles, then tighten the screws.
-
Once batteries are loaded, the device will power on, the default unit is gram (g).
Instructions for screen display
Wake-up Screen
When the screen is off, click the function key
Reset
When the screen is on, double click the function key
Switch unit
When the screen is on, click the function key
Resetting the Bluetooth
Press and hold the function key for 7 seconds, then the screen is on and
Bluetooth indicator is blinking
Connect to Bluetooth (can be found and connected)
The screen is on and Bluetooth indicator is blinking
Connected to the Bluetooth successfully
The screen is on and Bluetooth indicator is solid on
Disconnect Bluetooth
The screen is on and Bluetooth indicator is off
Connect with Mi Home App
This product works with Mi Home. Control your device and interact it with
other smart home devices in Mi Home app.
Scan the QR code to download and install the Mi Home app. You will be directed
to the connection setup page if Mi Home app is installed already. Or search”Mi
Home” in the app store to download and install.
Open the home page on Mi Home app, click ” + “in the up right corner of the
page, then click ” ” on the pop up page, scan the QR code on the manual or
device label to add device.
“Note: Please make sure the phone bluetooth is turned on. During
connection, please keep the phone close to the smart pet bowl.
The version of Mi Home app might have been updated, please follow the instructions bassed on the current app version,”
|
---|---
Care & Maintenance
Pawbby Smart Pet Bow! is designed with separated parts in mind. The bowl can be removed separately, and can’t be washed with metal scourer in order to avoid scratch.
“Suggestion: When feeding is done, please clean and dry the bowl. When not in use, please store the whole device in dry environment.
Precautions
- The main unit includes sensitive parts, such as the sensor. Please handle it with care and don’t let it falt down.
- Please put the device on the flat ground when in use.
- Please don’t overload, or it will cause damage to the sensor.
- The main unit is not water proof.
- Please use the device in the ambient temperature of 5~40°C. Please don’ t store itin the refrigerator or warm up the environment.
- Children should only use the device under adult supervision.
- Please don’t mix new and old batteries of different types.
- Please remove the batteries if the device will not be used for a long time and store it in dry place.
Specifications
Product Name: Pawbby Smart Pet Bowl
Model: MG-ZNO01-EU
Power Source: 1.5 V No.5 (AAA) batteries <3
Unit of weighing: gram (g), pound (Ib), ounce (02), milliliter (ml)
Minimum Increment: 1g
Weighing Range: 5 g – 2000 g
Item Dimensions: 180°180°83 mm
Net Weight: 540g
Main materials: ABS (main unit), food contact level 304 stainless steel
(bowl)
Operating Temperature: 5°C – 40°C
Operating humidity: 0% – 90% RH
Wireless Connectivity: Bluetooth 5.0
Device requirement: running Android 4.4/i0S 9.0 and above (from iPhone 5S
and later), and supports Bluetooth 4.0 and above
CMIIT ID:
Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or ~V interference caused by unauthcrized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission (FCC) Radiation Exposure Statement
Power is so low that no RF exposure calculation is needed.
FCC ID: 2AZYMMMGGUZW 2021518