IKEA LUNNOM E26 150 lm LED Bulb Instruction Manual
- June 6, 2024
- Ikea
Table of Contents
- IKEA LUNNOM E26 150 lm LED Bulb Instruction Manual
- LUNNOM LED bulb E26 150 lm globe clear NA Cardboard 350g
- CAUTION: THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
- ATTENTION: NE CONVIENT PAS AUX SORTIES DE SECOURS.
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IKEA LUNNOM E26 150 lm LED Bulb Instruction Manual
LUNNOM LED bulb E26 150 lm globe clear NA Cardboard 350g
CAUTION – RISK OF ELECTRIC SHOCK. Do not use if outer lamp envelope is damaged
or broken.
To avoid injuries, be careful when handling broken glass. Turn the power off
and let the bulb cool before inspecting or replacing it.
CAUTION: THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
RISK OF ELECTRIC SHOCK–USE IN DRY LOCATION ONLY.
Reliable operating temperature is -20ºC~25ºC.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-5 (B).
ATTENTION: NE CONVIENT PAS AUX SORTIES DE SECOURS.
RISQUE DE CHOC ÉLECTRIQUE-UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT.
Please note that changes or modifications of this product is not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.