CREATIVE DOUBLE STAR SX15 F 4-Axis Aerocraft RC Drone Instruction Manual

CREATIVE DOUBLE STAR SX15 F 4-Axis Aerocraft RC Drone

Attention

1. This 4-axis aerocraft is suitable for indoor/outdoor flying, but make sure the outdoor wind force is not more than grade 4.
2. It adopts a 2.4G frequency band; with a long controlled distance; allowing some helicopters to fly in the same area without any interference. Besides, players can control it to move forward/backward, turn left right, left/right sideways fly.
3.  Please read this manual carefully before using and keep it properly for future reference.

Battery installation

1. Loosen screw and remove the battery compartment door.
2.  install lfour1.SI/ alkaline batter is (not included)in the battery compartment as shown. Make sure to follow the cor reet positive(+)an: I negative(-)polarities with the corresponding marking inside the battery compartment.
3.  Re-instal 1 the battery compartment door and tighten

Aircraft battery change

Will craft of lithium battery from the battery holder by graphic method and disconnect the power plug, insert the plug of the charger USB computer USB jack, after connecting the charger plug and lithium battery plug. When charging, LED lights, at the end of the USB charging LED lights inside, the charging time is about 45 minutes.

Accessories package

This product contains fi ttings bag:

1. footstool
2. The blades A1, B1
3. The US8 correction
4.  with 1pc manual screwd rive

How to Control

• Push up the throttle stick, and the spinning speed of the main blades will increase.The aerocraft begins to ascend. Pun down the throttle stick and the spinning speed of the main blades will decre. The aerocraft begins to descend.
• Push the rudder stick to the left, and the aerocraft will tum to left. Push the rudder stick to the right. and the aerocraft will tum to right
• When the rudder stick Is pushed upward, the aerocrafl swashplate will downtilt and it advances. When the rudder stick is pushed downward, the acrocraft will uptilt and it recedes.
• When pushing the right lever (steering rudder) to the right the aerocraft will fly to the right When push the right lever (steering rudder) to the left, the aerocraft will fly to the left.
• Start a key fixed high, the vehicle automatically rise to a certain distance The height, can be carried out under the maintain status of roll, etc Line function. (without altitude hold function.this button is not ava)
• When the aeroaaft spins towards to left,please continuously press the trimming button (right-turn trimming) till it stops spinning
• When the aerocraft spins towards to right,please continuously press the trimming button (left-bJm trimming) till it stops spinning.
• When the aerocraft flies sideways (towards the left) in the process of hovering, please continuously press the trimming button (right sideways fly) till It recovers .
• When the aerocraft flies sideways (towards the right) in the process of hovering, please continuously press the trimming button (left sideways fly) till it recovers .
• When the aerocraft flies backward in the process of hovering, please continuously press the trimming button (forward) till it recovers.
• When the aerocraft flies forward in the process of hovering, please continuously press the trimming button (backward) till it recovers.
• If the aircraft take-off can not be the vertical rise of correction, place the aircraft into the horizontal platform and press the accelerator joystick to the bottom left corner and press the direction joystick to the bottom right comer at this lime, the indicator light of the aircraft changes from flashing to light, thot mean the calibration is completed, quickly, loosen all the remote control button until the indicator light.

3D flip flying

Players can control it to perform some breathtaking operations when mastering the basics.First, try it to the height of 3m.Second, click the flip key and push the right rudder to the end(in one direction), and push it: the aerocraft turns over.

PROBLEMS AND SOLUTIONS

PRECAUTIONS:

1. .Tha remote-controlled distance will be shortened when the power (aerocraft or transmitter) is insufficient.
2. lt is difficult to take off or fly not high when aerocraft’s power is insufficient.
3. When the aerocraft is damaged, please repair it in time and stop operating, or it may lead to injury.
4. if you do not use the transmitter for a long time, please remove the batteries to avoid the batteries’ leakage.
5. Do not drop the transmitter from the high altitude or crash it badly, otherwise, it will shorten the transmitter’s using life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>