OpenEye OE-C1016T2 2MP Outdoor IP Turret User Guide
- June 6, 2024
- OpenEye
Table of Contents
2MP Outdoor IP Turret
OE-C1016T2
37682AA
This quick start guide provides only basic information on the camera’s settings and operation for initial installation. Please read the user manual for optimal camera configurations.
Find the latest product documentation and software.
Scan the QR code or go to openeye.net/downloads
CONTENTS
INSTALLATION
- Apply template sticker to the desired camera location.
- Drill anchor holes using included mounting template.
- Remove the mounting template.
- Insert anchors.
- Mount camera.
- Connect network cable with included waterproof cable connector.
- Adjust camera view.
NOTE: If the camera will be exposed to inclement weather, OpenEye recommends sealing around the camera base or connection to the mounting surface with outdoor waterproof caulking.
DEFAULT USERNAME AND PASSWORD
NOTE: OpenEye IP cameras ship without a default password.
The admin user password can be set using the following methods:
-
OpenEye recorders running Apex 2.1 or newer will automatically set a new unique password if:
• Connected to an M-Series recorder with a built-in PoE switch.
• Connected to a network switch through the camera network port and selected then added in setup, if a new password has not already been set.
Set the Default Camera Password
Use the QR code or link for instructions on defining a unique camera password: https://www.openeye.net/support/faqs/default-camera-password -
Connect to the camera directly through a Web Browser and follow the onscreen prompts.
-
Use the Network Camera Manager (NCM) Utility.
Username: admin
ASSIGNING AN IP ADDRESS
OpenEye IP cameras are set to DHCP by default. If a DHCP server is not
detected after 4 minutes, the camera will default to IP address 192.168.51.2.
If you are not using a DHCP server, NCM will allow you to batch configure a
static IP address.
The IP address for the camera network on your Apex recorder is 192.168.51.1.
NOTE: To change this IP address please refer to your Apex recorder manual.
Selecting multiple cameras and entering IP address 192.168.51.2 will set an IP address on all selected cameras, starting at 192.168.51.2 and increasing per camera.
- Open Network Camera Manager.
- Select the applicable camera(s).
- Input starting IP address, Subnet Mask, Gateway, DNS.
- Apply changes.
- Wait 60 seconds before refreshing NCM.
NOTE: The NCM software manual can be found at https://www.openeye.net /ncm-manual
CONNECTING TO THE IP CAMERA
To access the camera setup menu, you need to open the Network Camera Manager (NCM) utility. NCM is preinstalled on all OpenEye Recorders and is also available for download on the OpenEye website for installation on your personal computer or laptop.
- Open Network Camera Manager.
- Locate your camera on the Network Camera Manager list.
- To open the web browser, select the camera and click LOAD.
PRODUCT FEATURES
Camera
Maximum Resolution| 1920×1080
Frame Rate at Maximum Resolution| 30FPS @ 2MP H.264/H.265
Total Streams| Dual Streaming
ONVIF| Profile S/G/T Compliant
Day/Night| True Day/Night
Wide Dynamic Range| True WDR
Environmental and Power
Power Consumption| 5W Max
Input Voltage| 12vDC / PoE
Pan/Tilt/Rotate| Pan: 0° ~ 360°
Tilt: 0° ~ 80°
Rotate: 0° ~ 360°
IP Rating| IP67
CONNECTIONS
1 | RJ-45 | For network and PoE connections |
---|---|---|
2 | Power (12vDC)* | Power connection |
*12vDC power input port should be plugged when not in use.
Reset Button| To restore the camera to factory defaults:
1. Disconnect power for 30 seconds.
2. Reconnect power and wait 30 seconds.
3. Press and hold the reset button for 20 seconds.
---|---
MicroSD Card Slot| Supports up to 512GB microSD card for Edge storage.
Do not add or remove the microSD card when the camera is powered on.
Waterproof Cable
1 | Thread lock cap | 4 | Rubber “O” ring |
---|---|---|---|
2 | Rubber plug | 5 | Camera cable |
3 | RJ45 enclosure |
Liberty Lake, WA, USA
509.232.5261
openeye.net
Copyright ©2021 OpenEye.
All Rights Reserved. Information contained in this document is subject to
change without prior notice. OpenEye does its best to provide accurate
information but cannot be held responsible for typos or mistakes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>