ZANUSSI ZNHN18FS1 Fridge Freezer User Manual
- June 6, 2024
- Zanussi
Table of Contents
ZANUSSI ZNHN18FS1 Fridge Freezer
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
- This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
- Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
- Children should be supervised to ensure that they do not play with the appliance.
- Children shall not carry out cleaning and user maintenance of the appliance without supervision.
- Keep all packaging away from children and dispose of it appropriately.
GENERAL SAFETY
- This appliance is for storing food and beverages only.
- This appliance is designed for single household domestic use in an indoor environment.
- This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
- To avoid contamination of food respect the following instructions:
- do not open the door for long periods;
- clean regularly surfaces that can come in contact with food and accessible drainage systems;
- store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Do not use water spray and steam to clean the appliance.
- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
- When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mold from developing within the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorized Service Centre or similarly qualified persons in order to avoid a hazard.
INSTALLATION
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Do not use the appliance before installing it in the built-in structure due to safety manner.
- Follow the installation instructions supplied with the appliance.
- Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
- Make sure the air can circulate around the appliance.
- At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
- Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
- Do not install the appliance close to radiators or cookers, ovens or hobs.
- Do not expose the appliance to the rain.
- Do not install the appliance where there is direct sunlight.
- Do not install this appliance in areas that are too humid or too cold.
- When you move the appliance, lift it by the front edge to avoid scratching the floor.
- The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.
ELECTRICAL CONNECTION
- The appliance must be earthed.
- Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
- Always use a correctly installed shockproof socket.
- Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorized Service Centre or an electrician to change the electrical components.
- The mains cable must stay below the level of the mains plug.
- Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
USE
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
- Do not change the specification of this appliance.
- Any use of the built-in product as free-standing is strictly prohibited.
- Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
- If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
- Do not let hot items to touch the plastic parts of the appliance.
- Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
- Do not store flammable gas and liquid in the appliance.
- Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
- Do not touch the compressor or the condenser. They are hot.
- Do not remove or touch items from the freezer compartment if your hands are wet or damp.
- Do not freeze again food that has been thawed.
- Follow the storage instructions on the packaging of frozen food.
- Wrap the food in any food contact material before putting it in the freezer compartment.
INTERNAL LIGHTING
- This product contains a light source of energy efficiency class G.
- Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
CARE AND CLEANING
- Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
- This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
SERVICE
- To repair the appliance contact the Authorized Service Centre. Use original spare parts only.
- Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
- The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
- Door gaskets will be available for 10 years after the model has been discontinued.
DISPOSAL
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Remove the door to prevent children and pets to be closed inside of the appliance.
- The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
- The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
- Do not cause damage to the part of the cooling unit that is near the heat exchanger.
INSTALLATION
DIMENSIONS
Overall Dimensions¹
H1 | mm | 1772 |
---|---|---|
W1* | mm | 548 |
D1 | mm | 549 |
¹ the height, width and depth of the appliance without the handle
- including the width of the bottom hinges (8 mm)
Space required in use²
H2 (A+B) | mm | 1816 |
---|---|---|
W2* | mm | 548 |
D2 | mm | 551 |
Space required in use²
A | mm | 1780 |
---|---|---|
B | mm | 36 |
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
- including the width of the bottom hinges (8 mm)
Overall space required in use³
H3 (A+B) | mm | 1816 |
---|---|---|
W3* | mm | 548 |
D3 | mm | 1071 |
³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
- including the width of the bottom hinges (8 mm)
LOCATION
To ensure appliance’s best functionality, you should not install the appliance
in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air can circulate freely
around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
This appliance is intended to be used at ambient temperature ranging from 10°C
to 43°C.
ELECTRICAL CONNECTION
CAUTION! Any electrical work required to install this appliance should be
carried out by a qualified electrician or competent person.
WARNING! This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be
observed.
The wires in the mains lead are colored in accordance with the following code:
- A – green and yellow: Earth
- C – brown: Live
- D – blue: Neutral
As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:
-
Connect the wire colored green and yellow to the terminal marked either with the letter “E” or by the earth symbol or colored green and yellow.
-
Connect the wire colored blue to the terminal either marked with the letter “N” or colored black.
-
Connect the wire colored brown to the terminal either marked with the “L” or colored red.
-
Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath.
Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. -
Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.
VENTILATION REQUIREMENTS
The airflow behind the appliance must be sufficient.
CAUTION! Refer to the installation instructions for the installation.
DOOR REVERSIBILITY
Please refer to the separate document with instructions on installation and
door reversal.
CAUTION! At every stage of reversing the door protect the floor from
scratching with a durable material.
CONTROL PANEL
-
Fridge temperature indicator LED
-
Freezer temperature indicator LED
-
FastFreeze indicator
-
Fridge compartment indicator
-
Freezer compartment indicator
-
ON/OFF button
Compartment selection button -
FastFreeze button
Temperature regulator
SWITCHING ON
- Insert the plug into the wall socket.
- Touch the ON/OFF button (6) if all LED indicators are off.
SWITCHING OFF
Keep touching the ON/OFF button (6) for 3 seconds.
All indicators light off.
TEMPERATURE REGULATION
Before regulating the temperature, it is necessary to select the compartment (fridge or freezer).
The upper or lower cavity is selected by the compartment selection button (6).
To select the freezer compartment touch the compartment selection button (6)
until LED corresponding to the lower cavity lights up.
The temperature LED indicator shows the latest set temperature. Recommended
setting is -18°C.
To select the fridge compartment touch the compartment selection button (6)
until LED corresponding to the upper cavity lights up.
The temperature LED indicator shows the latest set temperature. Recommended
setting is +4°C.
To set temperature:
- Touch temperature regulator button ( 7 ). Current temperature indicator blinks.
- Any time you touch the temperature regulator button ( 7 ), the setting moves by one position. When you select a temperature, the LED corresponding to selected temperature value blinks for a while and the setting is fixed.
The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze function is used to perform pre-freezing and fast freezing in sequence in the freezer compartment. This function accelerates the freezing of fresh food and, at the same time, protects food products already stored in the freezer compartment from undesirable warming.
To freeze fresh food activate the FastFreeze function at least 24 hours before placing the food to complete pre-freezing.
To activate FastFreeze function press the FastFreeze button (7) for 3 seconds. The FastFreeze indicator switches on.
It is possible to deactivate the function at any time by pressing FastFreeze button (7) for 3 seconds again. The FastFreeze indicator switches off.
HIGH TEMPERATURE ALARM
When there is a temperature increase in the freezer compartment (for example due to an earlier power
DAILY USE
POSITIONING THE DOOR SHELVES
To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
- Gradually pull the shelf up until it comes free.
- Reposition as required.
MOVABLE SHELVES
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.
VEGETABLE DRAWERS
There are special drawers in the bottom part of the appliance suitable for storage of fruits and vegetables.
DYNAMICAIR
The refrigerator compartment is equipped with a device that allows rapid
cooling of foods and keeps more uniform temperature in the compartment.
Switch on the device when you have to cool down a big amount of food, when you
notice that the temperature in specific area of the refrigerator is too high
or too low or when the room temperature is higher than 35°C to guarantee a
greater homogenization of internal temperature.
Press the button (A) to switch ON the fan. The green light (B) appears.
Before switching off the appliance, remember to turn off the fan by pressing the button (A). The green light (B) disappears.
FREEZING FRESH FOOD
The freezer compartment is suitable for freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze fresh food activate the FastFreeze function at least 24 hours before
placing the food to be frozen in the freezer compartment.
Store the fresh food evenly distributed in the first compartment or drawer
from the top.
The maximum amount of food that can be frozen without adding other fresh food
during 24 hours is specified on the rating plate (a label located inside the
appliance).
When the freezing process is complete, the appliance automatically returns to
the previous temperature setting (see “FastFreeze Function”).
For more information refer to “Hints for freezing”.
STORAGE OF FROZEN FOOD
When activating an appliance for the first time or after a period out of use,
before putting the products in the compartment let the appliance run at least
3 hours with the FastFreeze function switched on.
The freezer drawers ensure that it is quick and easy to find the food package
you want.
If large quantities of food are to be stored, remove all drawers and place the
food on shelves.
Keep the food no closer than 15 mm from the door.
CAUTION! In the event of accidental defrosting, for example due to a
power failure, if the power has been off for longer than the value shown on
rating plate under “rising time”, the defrosted food must be consumed quickly
or cooked immediately then cooled and then re-frozen. Refer to “High
temperature alarm”.
THAWING
Deep-frozen or frozen food, prior to being consumed, can be thawed in the
refrigerator or inside a plastic bag under cold water.
This operation depends on the time available and on the type of food. Small
pieces may even be cooked still frozen.
ICE-CUBE PRODUCTION
This appliance is equipped with one or more trays for the production of ice- cubes.
- Fill these trays with water.
- Put the ice trays in the freezer compartment.
COLD ACCUMULATORS
This appliance is equipped with cold accumulators which increase storage time
in the event of a power cut or breakdown.
To ensure the best performance of the accumulators, place them in the front
top area of the appliance.
HINTS AND TIPS
HINTS FOR ENERGY SAVING
- Freezer: The internal configuration of the appliance is the one that ensures the most efficient use of energy.
- Fridge: Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
- Do not remove the cold accumulators from the freezer basket.
- Do not open the door frequently or leave it open longer than necessary.
- Freezer: The colder the temperature setting, the higher the energy consumption.
- Fridge: Do not set too high temperature to save energy unless it is required by the characteristics of the food.
- If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
- Ensure a good ventilation. Do not cover the ventilation grilles or holes.
- Make sure that food products inside the appliance allow air circulation through dedicated holes in the rear interior of the appliance.
HINTS FOR FREEZING
- Activate FastFreeze function at least 24 hours before placing the food inside the freezer compartment.
- Before freezing wrap and seal fresh food in: aluminium foil, plastic film or bags, airtight containers with lid.
- For more efficient freezing and thawing divide food into small portions.
- It is recommended to put labels and dates on all your frozen food. This will help to identify foods and to know when they should be used before their deterioration.
- The food should be fresh when being frozen to preserve good quality. Especially fruits and vegetables should be frozen after the harvest to preserve all of their nutrients.
- Do not freeze bottles or cans with liquids, in particular drinks containing carbon dioxide -they may explode during freezing.
- Do not put hot food in the freezer compartment. Cool it down at room temperature before placing it inside the compartment.
- To avoid increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it. Place food at room temperature in the part of the freezer compartment where there is no frozen food.
- Do not eat ice cubes, water ices or ice lollies immediately after taking them out of the freezer. Risk of frostbites.
- Do not re-freeze defrosted food. If the food has defrosted, cook it, cool it down and then freeze it.
HINTS FOR STORAGE OF FROZEN FOOD
-
Freezer compartment is the one marked.
-
The medium temperature setting ensures good preservation of frozen food products.
Higher temperature setting inside the appliance may lead to shorter shelf life. -
The whole freezer compartment is suitable for storage of frozen food products.
-
Leave enough space around the food to allow air to circulate freely.
-
For adequate storage refer to food packaging label to see the shelf life of food.
-
It is important to wrap the food in such a way that prevents water, humidity or condensation from getting inside.
SHOPPING TIPS
After grocery shopping:
- Ensure that the packaging is not damaged – the food could be deteriorated. If the package is swollen or wet, it might have not been stored in the optimal conditions and defrosting may have already started.
- To limit the defrosting process buy frozen goods at the end of your grocery shopping and transport them in a thermal and insulated cool bag.
- Place the frozen foods immediately in the freezer after coming back from the shop.
- If food has defrosted even partially, do not re-freeze it. Consume it as soon as possible.
- Respect the expiry date and the storage information on the package.
SHELF LIFE FOR FREEZER COMPARTMENT
Type of food | Shelf life (months) |
---|---|
Bread | 3 |
Fruits (except citrus) | 6 – 12 |
Vegetables | 8 – 10 |
Leftovers without meat | 1 – 2 |
Dairy food:
Butter| 6 – 9
Soft cheese (e.g. mozzarella)| 3 – 4
Hard cheese (e.g. parmesan, cheddar)| 6
Seafood:
Fatty fish (e.g. salmon, mackerel)| 2 – 3
Lean fish (e.g. cod, flounder)| 4 – 6
Shrimps| 12
Shucked clams and mussels| 3 – 4
Cooked fish| 1 – 2
Meat:
Poultry| 9 – 12
Beef| 6 – 12
Pork| 4 – 6
Lamb| 6 – 9
Sausage| 1 – 2
Ham| 1 – 2
Leftovers with meat| 2 – 3
HINTS FOR FRESH FOOD REFRIGERATION
-
Good temperature setting that ensures preservation of fresh food is a temperature less than or equal to +4°C.
Higher temperature setting inside the appliance may lead to shorter shelf life of food. -
Cover the food with packaging to preserve its freshness and aroma.
-
Always use closed containers for liquids and for food, to avoid flavors or odors in the compartment.
-
To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
-
It is recommended to defrost the food inside the fridge.
-
Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
-
To prevent food waste the new stock of food should always be placed behind the old one.
HINTS FOR FOOD REFRIGERATION
- Fresh food compartment is the one marked (on the rating plate) with .
- Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
- Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
- It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
- Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
- Butter and cheese: place in an airtight container or wrap in an aluminum foil or a polythene bag to exclude as much air as possible.
- Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
- In order to accelerate cooling down of the goods, it is advisable to turn on the fan. The activation of DYNAMICAIR allows greater homogenization of internal temperatures.
- Always refer to the expiry date of the products to know how long to keep them.
CARE AND CLEANING
CLEANING THE INTERIOR
Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.
PERIODIC CLEANING
The equipment has to be cleaned regularly:
- Clean the inside and accessories with lukewarm water and some neutral soap.
- Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
- Rinse and dry thoroughly.
DEFROSTING OF THE REFRIGERATOR
Frost is automatically eliminated from the evaporator of the refrigerator
compartment during normal use. The defrost water drains out through a trough
into a special container at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole in the
middle of the refrigerator compartment channel to prevent the water
overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance.
DEFROSTING OF THE FREEZER
The freezer compartment is frost free. This means that there is no build up of frost when it is in operation, neither on the internal walls, nor on the foods.
PERIOD OF NON-OPERATION
When the appliance is not in use for long period, take the following precautions:
- Disconnect the appliance from electricity supply.
- Remove all food.
- Clean the appliance and all accessories.
- Leave the doors open to prevent unpleasant smells.
WHAT TO DO IF…
Problem
| Possible cause|
Solution
---|---|---
The appliance does not operate.| The appliance is switched off.| Switch on the
appliance.
The mains plug is not connected to the mains socket correctly.| Connect the
mains plug to the mains socket correctly.
There is no voltage in the mains socket.| Connect a different electrical
appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not supported properly.| Check if
the appliance stands stable.
Acoustic or visual alarm is on.| The cabinet has been recently switched on.|
Refer to “Door Open Alarm” or “High Temperature Alarm”.
The temperature in the appliance is too high.| Refer to “Door Open Alarm” or
“High Temperature Alarm”.
The door is left open.| Close the door.
The compressor operates continually.| Temperature is set incorrectly.| Refer
to “Control Panel” chap- ter.
Many food products were put in at the same time.| Wait a few hours and then
check the temperature again.
The room temperature is too high.| Refer to “Installation” chapter.
Food products placed in the appliance were too warm.| Allow food products to
cool to room temperature before storing.
The door is not closed correctly.| Refer to “Closing the door” section.
The FastFreeze function is switched on.| Refer to “FastFreeze function”
section.
The compressor does not start immediately after pressing the “FastFreeze”, or
after changing the temperature.| The compressor starts after a period of
time.| This is normal, no error has occurred.
Door is misaligned or interferes with ventilation grill.| The appliance is not
levelled.| Refer to installation instructions.
Door does not open easily.| You attempted to re-open the door immediately
after closing.| Wait a few seconds between closing and re-opening of the door.
The lamp does not work.| The lamp is in stand-by mode.| Close and open the
door.
The lamp is defective.| Contact the nearest Authorized Service Centre.
There is too much frost and ice.| The door is not closed correctly.| Refer to
“Closing the door” section.
The gasket is deformed or dirty.| Refer to “Closing the door” section.
Food products are not wrap- ped properly.| Wrap the food products better.
Temperature is set incorrectly.| Refer to “Control Panel” chap- ter.
Appliance is fully loaded and is set to the lowest temperature.| Set a higher
temperature. Re- fer to “Control Panel” chapter.
Temperature set in the appliance is too low and the ambient temperature is too
high.| Set a higher temperature. Re- fer to “Control Panel” chapter.
Water flows on the rear plate of the refrigerator.| During the automatic
defrosting process, frost melts on the rear plate.| This is correct.
There is too much condensed water on the rear wall of the refrigerator.| Door
was opened too frequently.| Open the door only when necessary.
Door was not closed completely.| Make sure the door is closed completely.
Stored food was not wrapped.| Wrap food in suitable packaging before storing
it in the appliance.
Water flows inside the refrigerator.| Food products prevent the water from
flowing into the water collector.| Make sure that food products do not touch
the rear plate.
The water outlet is clogged.| Clean the water outlet.
Water flows on the floor.| The melting water outlet is not connected to the
evaporative tray above the compressor.| Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set.| The “FastFreeze function” is switched on.| Switch
off “FastFreeze function” manually, or wait until the function deactivates
automatically to set the temperature. Refer to “FastFreeze function” section.
The temperature in the appliance is too low/too high.| The temperature is not
set correctly.| Set a higher/lower temperature.
The door is not closed correctly.| Refer to “Closing the door” section.
The food products’ temperature is too high.| Let the food products temperature
decrease to room temperature before storage.
Many food products are stored at the same time.| Store less food products at
the same time.
The door has been opened of- ten.| Open the door only if necessary.
The FastFreeze function is switched on.| Refer to “FastFreeze function”
section.
There is no cold air circulation in the appliance.| Make sure that there is
cold air circulation in the appliance.
Refer to “Hints and Tips” chap- ter.
Temperature setting LEDs flash at the same time.| An error has occurred in
measuring the temperature.| Contact the nearest Authorized Service Centre. The
cooling system will continue to keep food products cold, but temperature
adjustment will not be possible.
REPLACING THE LAMP
The appliance is equipped with a long life LED interior light.
Only service is allowed to replace the lighting device. Contact your
Authorized Service Centre.
CLOSING THE DOOR
- Clean the door gaskets.
- If necessary, adjust the door. Refer to installation instructions.
- If necessary, replace the defective door gaskets. Contact the Authorized Service Centre.
NOISES
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web
link to the information related to the performance of the appliance. Keep the
energy label for reference together with the user manual and all other
documents provided with this appliance.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification shall be compliant with BS EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers
to recycle it. Help protect the environment and human health by recycling
waste of electrical and electronic appliances. Do not dispose of appliances
marked
with the symbol with the household waste. Return the product to your local
recycling facility or contact your municipal office.