Roland JUPITER-Xm Cloud Connect Software Installation Guide
- June 6, 2024
- Roland
Table of Contents
JUPITER-X / JUPITER-Xm
Roland Cloud Connect
Setup Manual
Updating the JUPITER-X/Xm to the Latest Version
Before using Roland Cloud, you must update the JUPITER-X/Xm to the latest version.
- Download the latest version at the website shown below.
-
Update this unit from your computer.
https://roland.cm/jupiter-x_dl (JUPITER-X)
https://roland.cm/jupiter-xm_dl (JUPITER-Xm)- Follow the instructions shown to perform the update.
Enabling Your Roland Membership
- You can do this on your computer or with your smartphone.
Log in to Roland Cloud
Log in to Roland Cloud from the link shown below.
https://roland.cm/wc1rc
Important
If you already have an account you’re using for the JUPITER-X/Xm, make sure to
use that account. Since your user licenses are linked to any contents you may
have downloaded from Roland Cloud (such as sound packs, wave expansions and
model expansions), you cannot use any new contents if you follow the next
steps using a different account, unless you execute “Remove License” on the
JUPITER-X/Xm. For this reason, use caution if you have contents that are
already installed.
Creating a new Roland account
If you don’t have a Roland account, click “Create account” to make a new
account.
Inputting Your Roland Cloud Activation Key
Once you login to Roland Cloud, the “Membership Activation” screen appears.
Once you login to Roland Cloud, the “Membership Activation” screen appears.
- Have the “WC-1 Roland Cloud Activation Card” that was included with Roland Cloud Connect on hand.
- Input your Roland Cloud Activation Key, and click “SUBMIT.”
One year of Roland Cloud Pro Membership is now added to the Roland account you are logged in with.
- If you are already a member, an license for an extra year of Pro Membership is added to your existing plan.
- After the one-year membership expires, the sound contents you’ve installed cannot be accessed. To continue using the contents, you must renew your subscription.
Installing the Roland Cloud Connect
-
Use your smartphone to access the website shown below. https://roland.cm/wc1app
-
Go to the “Roland Cloud Connect” dedicated WC-1 app product page.
-
Install the app for iOS or Android.
Using Roland Cloud Connect
- Turn on the JUPITER-X/Xm and connect the WC-1.
- Tap the icon for the “Roland Cloud Connect” app on your smartphone.
- When the app launches, enable the Bluetooth® function and location data when prompted to do so. 3. Read the “Terms of Use” and tap “Agree.” 4. Input your registered e-mail address and password, and tap “Log in.”
- Once you log in to Roland Cloud Connect, you can view the “Roland Cloud Connect Owner’s Manual” from “ ”→ “Show online manual.”
5. Follow the onscreen instructions for setup.
→Refer to the “Roland Cloud Connect Owner’s Manual” for the setting steps.
Once the WC-1 is connected to the network (router) via Wi-Fi, the Wi-Fi signal strength is shown in the display.
→ Refer to the “Roland Cloud Connect Owner’s Manual” for how to operate the app after the “Roland Cloud Connect” screen is shown.
Authenticating Your Subscription
You can keep using the tones you installed via Roland Cloud Connect by
periodically authenticating your subscription.
Authentication of your subscription starts automatically once you connect the
WC-1 to the JUPITER-X/Xm.
You should periodically connect the WC-1 to the JUPITER-X/Xm.
You can check the authentication of your subscription as follows.
The remaining number of times you can use the tones you’ve imported is shown
in [MENU] → [UTILITY] → [WIRELESS ADAPTER] →[W.ADAPTER Info] → “Limit.”
Once your subscription is authenticated, “—” is shown as the “Limit.”
- Each time you power up the JUPITER-X/Xm counts as one time.
If you use this instrument 20 consecutive times without authenticating your subscription, the following message appears onscreen once you turn on the power.
Connect the WC-1 to authenticate your subscription.
If you use this instrument 30 consecutive times without authenticating your
subscription, the following message appears onscreen once you turn on the
power, and the imported tones are disabled.
Connect the WC-1 to authenticate your subscription. The tones you imported are
reenabled once you authenticate.
-
The WIRELESS ADAPTER parameters are shown only under the following conditions.
- When the WC-1 is connected
- When a wave expansion, model expansion or other contents have been installed via subscription
Your subscription cannot be authenticated in the cases shown below, and the
tones you imported via Roland Cloud Connect cannot be used.
When the instrument is used for 30 consecutive times without authenticating
the subscription
Note that when the WC-1 is not correctly connected to the network (via
router), authentication is not performed even if you connect the WC-1 to the
JUPITER-X/Xm.
When your yearly Roland Cloud Pro membership has ended
To continue using the contents, renew your subscription.
When your subscription contract has been cancelled
Parameters Shown when Connecting the WC-1
These parameters are related to the WC-1.
[MENU] → [UTILITY] → [WIRELESS ADAPTER] → [W.ADAPTER Info] These parameters
show the connection status of the WC-1.
Parameter | Explanation |
---|---|
Version | WC-1 version |
MAC | MAC address |
SSID | SSID to which the unit connects |
Status | WC-1 operating status |
Setup | Now setting up |
Connecting | Now connecting to the network (router) |
Active | WC-1 can be used |
Limit | The number of times you can power on this unit before the tones you’ve |
installed are disabled
- When the remaining number of times reaches “0,” the installed tones are disabled, since the subscription was not authenticated.
- Once your subscription is authenticated, the remaining number of times is initialized and shown as “—”.
You can check the operating status of the WC-1 by looking at the WC-1 operating status LED.
LED | Explanation |
---|---|
Lit | Connected to network |
Blinks slowly | Now detecting network |
Blinks rapidly | Cannot connect to the network (router) |
[MENU] → [UTILITY] → [WIRELESS ADAPTER] → [W.ADAPTER Util]Parameter |
Explanation
---|---
RESET SETTINGS| Initializes the WC-1
- When “RESET SETTINGS” is executed, the WC-1 is disconnected from the network.
© 2021 Roland Corporation