beryko Redmi Buds 3 Wireless Earbuds User Manual
- June 6, 2024
- beryko
Table of Contents
****
beryko Redmi Buds 3 Wireless Earbuds
**
**
Read this manual carefully before use, and retain it for future
reference.Illustrations of product, accessories, and user interface in the
user manual
are for reference purposes only. The actual product and functions may vary due
to product enhancements.
Product Overview
-
Charging Case
-
Earbuds
Wearing
- Gently place the earbud into your ear canal, then adjust it to a comfortable position.
- During calls, make sure to point the primary microphone towards your mouth for clearer calls.
Charging
-
Before use, please remove the protective film from the contact points on both earbuds and fully charge the charging case and the buds.
-
Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously.
-
When the charging case is not fully charged, its indicator is white. When it is fully charged, its indicator is off.
Turning On
- When the buds are in the charging case, open the lid to automatically turn them on.
- When putting the earbuds into the charging case while they are turned off, the earbuds will be automatically turned on.
Connection
First time connection
Both earbuds will enter the awaiting connection mode when the charging case’s lid is opened. Afer enabling the phone’s Bluetooth, search for and tap ‘Redmi Buds 3’ to connect the earbuds to the phone.
Note: If the earbuds cannot be connected, place them back into the charging case, close the lid and repeat the above operation.
Reset Earbuds
If the earbuds cannot connect properly, please follow the below
steps to reset them.
Open the lid of the charging case and place both earbuds in the case. Press
and hold the charging case button for 10 seconds, and the charging case’s
indicator will blink white for 3 seconds and turn off, indicating the earbuds
have been reset successfully (the connection records between the left and
right earbuds, and the earbuds and the phone have been cleared).
Function Overview
Answer/End calls
Double tap the left/right earbud’s multi-function touch area to answer a call;
and tap the left/right earbud’s multi-function touch area three times to
decline or hang up the call.
Play/Pause Music
-
Method 1: Remove the earbuds to pause the music and wear the earbuds to start playing the music.*
Method 2: Press and hold the left/right earbud’s multi-function touch area to pause/play the audio. -
After manually pausing the music, the music will not play automatically when you remove and wear the earbuds again.
Play next track/previous track
When playing audio, double tap the earbud’s multi-function touch area to play
the next track; and then tap the earbud’s multi-function touch area three
times to play the previous track.
Answer a Second Call
Double tap the left/right earbud’s multi-function touch area to put the
ongoing call on hold and answer the incoming call, and tap the left/right
earbud’s multi-function touch area three times to hang up the current call and
answer the call on hold.
Switch between single/dual bud mode
When both buds are connected successfully, they are in dual-bud mode. If place
one of the buds back into the charging case and close its lid, the other bud
will automatically enter the single-bud mode. When removing the second bud
from the charging case, the dual-bud mode will automatically be restored
again.
Fast Pairing
Place the earbuds into the charging case and close its lid. Make the sure the
Mi/Redmi phone’s Bluetooth is enabled and hold it close to the charging case,
then open the case’s lid and follow the on-screen instructions to connect the
phone to the earbuds.
Note: To use the feature to quickly connect, please update your Mi/Redmi phone to the latest stable version. Then open Additional settings in your phone’s Bluetooth settings to enable Pair compatible devices. This feature is currently only supported by some Mi/Redmi phones.
Automatic connection
When the earbuds are in the charging case, opening the lid of the charging
case will automatically connect the earbuds to the most recently used
Bluetooth device. If the earbuds are not connected to any device, they will
automatically enter the awaiting connection state.
Wearing detection
The built-in optical sensor can detect the earbud’s wearing state in real-
time, it can detect when the earbud is in the ear. For example, if the device
the earbuds are connected to is paused, wearing the earbuds will start the
music, and removing the earbuds will pause the music.
Note: Once the weather is cold outdoors and your hands become dry, the buds may not function when touching them.
Specifications
- Name: Wireless Earphones
- Model: M2104E1
- Frequency Band: 2402–2480 MHz
- Max RF Output Power: < 20 mW
- Earbuds
- Dimensions: 40.7 × 16.9 × 18.7 mm
- Net Weight (per earbud): Approx. 4.47 g
- Wireless Range: 10 m (in an obstacle-free environment)
- Cell Capacity (per earbud): 35 mAh
- Input: 5 V=70 mA
- Cell Type: Lithium-ion polymer cell
- Wireless Connectivity: Bluetooth 5.2
- Charging Case
- Model: M2104E1
- Dimensions: 49.6 × 49.6 × 24.5 mm
- Battery Capacity: 310 mAh
- Input: 5 V=500 mA
- Output: 5 V=150 mA
- Battery Type: Lithium-ion polymer battery
- Storage Temperature: 0 °C to 45 °C
- Operating Temperature: 5 °C to 40 °C
- Service Life: 1 year
Important Safety Information
- Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
- Keep the product’s indicator away from the eyes of children and animals while the product is in use.
- Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
- Do not disassemble, puncture or crush the product nor expose it to fire.
- Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling.
- To prevent possible hearing loss, do not use high volume for long periods of time.
- This product is not a toy and may contain small parts. Please keep them out of the reach of children. Disposal of a battery into fire or a hot oven or water or other liquids
- or mechanically crushing or cussing of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Product information and certification marks are located in the Charging Case.
- Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations.
- Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc).
- = The symbol indicates DC voltage.
- This device is equipped with a built-in battery that can not be removed or replaced. Do not disassemble or modify the battery by yourself.
- Only use certified chargers supplied by qualified manufacturers.
EU DECLARATION OF CONFORMITY
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2104E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2104E1 is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html
Complles With IMDA Standards DB106135
75323/SDPPI/2021 9003
CIDF15000056
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi
Ecosystem company)
Address: Suite 204, 4th Block, No. 86 Hongtu Road, Nancheng
District,Dongguan, Guangdong, China
User Manual Version: V1.0
For further information, please go to www.mi.com
Importer:
Beryko s.r.o. Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz
FAQS
Are this compatible with iphone 11pro?
Yes but in iphone, the sound quality is not that great, sound is great in android.
Is it compatible with Xiaomi redmi note 7 phone?
I say is that I’ve used it with iPhone X and windows 11 and works fine.
are these the international edition?
Yes.
How much is redmi earbuds 3?
Xiaomi Redmi Earbuds 3 Pro True Wireless Stereo (TWS) Earphones price in India starts from ₹ 2,999. The lowest price of Xiaomi Redmi Earbuds 3 Pro True Wireless Stereo (TWS) Earphones is ₹ 2,999 at Amazon on 4th January 2023.
Does Redmi Buds 3 support fast charging?
- 10-minute fast charge requires the charging case to have at least 20% battery life remaining. Use your earbuds for up to 90 minutes after a 10-minute fast charge.
Is redmi earbuds s worth buying?
These earphones are surprisingly good for the price, and definitely the best pair of true wireless earphones you can buy for less than Rs. 2,000. With a combination of good design, useful specifications, and clean, enjoyable sound, the Redmi Earbuds S pretty much gets everything right considering its price.
Is Redmi Buds 3 Lite worth it?
It’s a solid earbud with a strong battery life and decent sound quality but I gave it 4 stars not 5 because I can’t change the volume by tapping it on the buds or turn it on without the charging case. Other than that I’m happy with it. The earbuds are magnetic so they will stick together.
Are redmi earbuds 3 PRO good?
With their unique design, solid build quality and great sound, Redmi Buds 3 Pro are easy to recommend. At $60/€60, you’re getting an above-average pair of buds that deliver no-gimmick noise cancelation, decent battery endurance and wireless charging.
How long does Redmi Buds 3 last?
Extra-long 20-hour battery life*Enough time to listen to 300 more songs though small and lightweight, the Redmi Buds 3 offers both power and comfort. Enjoy up to 5 hours of battery life on a single charge, or up to 20 hours use when paired with the charging case. Relax and get back to your music.
Are the Xiaomi Redmi buds 3 good?
The Xiaomi Buds 3 are what I’d call a mid to high-end device. These earphones deliver high-quality audio with sound that’s well represented on the entire frequency range, from low to mid and high frequencies. In short, they sound really well.
Which is the No 1 earphone brand?
Apple is the leading brand in the premium earbuds category. boAt is the best affordable earbuds brand in India in 2022. Other latest brands like Nothing have also taken up a spot.
VIDEO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>