PLANETHAEDSET BTH-800-OHB PHS-700-800-900 Bluetooth Dual Muff Headset Instructions

PLANETHADSET® PHS-700/800/900 Bluetooth Dual Muff Headsets

The PHS -700/800/900 are Bluetooth Muff Headsets designed for use with a BT Bluetooth adapter and a two-way radio (each sold separately)

BTH-800-OHB SHOWN

PLANETBLU PHS-700 HMB
PLANETBLU PHS-800-OHB
PLANETBLU PHS-900-EMB
Made in Taiwan

Controls and Connections

CHARGING THE HEADSET

The PLANETBLU Muff Headset has an internal Lithium-Ion rechargeable battery pack which must be charged prior to operation. A fully charged battery will provide approximately 10 hours (or more) of operation before needing to be recharged. However, operating time can vary depending on usage and the condition of the battery pack. Recharge the battery regularly.

To charge the PLANETBLU Headset:

1. Ensure the PLANETBLU Headset is turned off using the Power Button.
2. Plug the supplied wall charger into a standard 120 volt AC outlet.
3. Plug the charging cable into the AC wall charger and then into the charge jack on the Headset. You will need to remove the protective rubber cover that is inserted into the charge jack. (To prevent dust and moisture from damaging your Headset, always ensure this cover is in place when you are not charging the Headset.)
4. Once the charging process has begun, the LED indicator on the Headset will show a continuous red light. When the battery is done charging, the LED light will turn off.
5. The typical charge time is approximately 4 hours. Actual charge time will vary depending on several factors including the battery’s charge state, condition, and age.
6. Disconnect the charger from the lapel mic when charging is completed.

Charging Cautions:
– Use only the wall charger supplied by the manufacturer. Do not use any other charger.
– Do not use a wall charger that appears to be damaged. (Example: frayed wires, melted plastic, etc.) Contact Planet Headset to get a new manufacturer-approved replacement charger.
– Do not tamper with or modify the

Headset or charger.
– Always turn the power switch to the off position when charging the Headset.

PHS P-CBL-USB-MICRO charger cable and PHS P-CHA-BT-USB wall charger included with the Headset.

PAIRING THE HEADSET WITH A PLANETBLU ADAPTER OR CELLULAR TELEPHONE

Before you can use the PLANETBLU Muff Headset, it must be paired with the BT Bluetooth adapter and/or cellular telephone that you wish to use.

To pair the Headset with a BT Bluetooth radio adapter

1. Begin by first making sure that the Headset BT Bluetooth radio adapter, and the two-way radio the adapter is connected to are all powered off. You should also power off any nearby Bluetooth devices.
2. Place the BT Bluetooth radio adapter into pairing mode by following the instructions that were provided with that device. On most BT Bluetooth adapters this is done by pressing and holding the PTT/Multifunction button on the adapter while turning the two-way radio on. Continue to hold the button down until the LED indicator on the adapter shows two blue flashes every
3. Press and hold down the Power Button on the PLANETBLU Muff Headset for five seconds, until the LED on the Headset flashes RED-BLUE-RED-BLUE continuously in sequence. The Headset is now in pairing mode.
4. After a few seconds, the two devices should sync to one another. Once the Headset and BT Bluetooth radio adapter are paired with each other the status LED on the adapter will show a constant blue light for three The LEDs on both the adapter and Headset will then show one blue flash every few seconds.
5. If the BT Bluetooth radio adapter does not detect the Headset within 60 seconds of being put into pairing mode, the adapter will exit the pairing mode and resume normal operation without synching to the.
6. Once successfully paired, you will be able to operate your 2-way radio using the PLANETBLU Muff

To pair the Muff Headset with a cellular telephone:

The PLANETBLU headset is capable of working with a Bluetooth-enabled cellular telephone.

1. When pairing the Headset with a cellular phone, first make sure that the headset and all other nearby Bluetooth devices are powered off before beginning.
2. Press and hold down the Power Button on the headset for five seconds, until the LED on the adapter flashes RED-BLUE-RED-BLUE continuously in The headset Headset is now in pairing mode.
3. Activate the Bluetooth feature on your phone.
4. Activate the “scan/discover new Bluetooth devices” feature on The exact steps needed to do this will vary depending on the brand/model of phone you are using.
5. Select the Headset from the list of Bluetooth devices shown on your phone. If the phone asks for a passcode, enter “0000”. The phone may also prompt you to confirm the
6. After a few seconds, the two devices should synch to one Once the Planet Headset and phone are paired with each other, the status LED on the microphone will revert back to a single blue flash every few seconds.
7. Once successfully paired, you will be able to make and receive telephone calls using the Headset

Reconnecting a Previously Paired Headset and Radio Adapter/Cellular Phone
Once the PLANETBLU Muff Headset and Planet Headset radio adapter and/or cellular telephone have been successfully paired together, both devices will remember that connection. The Headset and radio adapter/phone will attempt to reestablish their link whenever they are both powered on and in within range of each other. Re-establishing this connection can take 10-60 seconds.

TESTING AND USING THE PLANETBLU MUFF HEADSET
Once your Headset and Planet Headset radio adapter and/or cellular phone have been paired together:

Received signals will be heard through the speakers in the PLANETBLU Muff Headset. The volume of received calls can be adjusted using the Volume Up and Volume Down buttons on the Headset or the volume control on the two-way radio or cellular phone.

The operator’s voice is picked up by the boom microphone in the PLANETBLU Muff Headset.

Push-to-Talk can be activated one of several different ways:

• By pressing and holding the PTT button on the PLANETBLU Muff Headset.
• By pressing and holding the Talk/Multifunction button on the PLANETBLU Adapter.
• Using an optional wired PTT that is plugged into the PLANETBLU Adapter.
• Using an optional PLANETBLU Wireless Bluetooth PTT (model BT-PTT2, sold separately). Note that if you are using a PLANETBLU BT-PHS2, you will first need to pair the radio adapter with the PTT using the instructions located in the PLANETBLU PTT User’s Guide.

Telephone functions are provided by using the Headset’s Phone Button.

You can also activate your phone’s voice dialing feature by pressing and holding the Phone Button on the side of the Headset for three seconds. (This function works only when the microphone is NOT also connected to a two-way radio.)

When the Headset is paired to an MP3 music player or to a cellular phone only, the following buttons are remapped for playing music.

STATUS LED MESSAGES

The meanings of the various status LED messages shown by the PLANETBLU Muff Headset are shown on the following table:

SPECIFICATIONS

SUPPORT AND WARRANTY

Planet Headset warrants this product against defects in materials or workmanship for a period of one year from the date of retail purchase. PLANETHEADSET will repair or replace a defective unit, at our option, without charge for parts or labor. The limited warranty is extended only to the original purchaser and is valid only to consumers in the United States and Canada. It does not cover damage or failure caused by or attributable to Acts of God, abuse, misuse, improper or abnormal usage, faulty installation, improper maintenance, lightning, or other incidences of excessive voltage, or any tampering or repairs by other than a Planet Headset authorized repair facility. It does not cover the replacement of consumable parts, transportation costs, or damage in transit.

Repair or replacement under the terms of this warranty does not extend the terms of this warranty. This warranty can only be modified by an officer of Planet Headset , and then only in writing. Should this product prove defective in workmanship or material, the consumer’s sole remedies shall be such repair or replacement as provided by the terms of this warranty. Under no circumstances shall Planet Headset be liable for any loss or damage, direct, consequential, or incidental, arising out of the use of or inability to use this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights, which may vary, from state to state.

For support or warranty on your product, contact us at 252 238 0643 or visit us on the web at www.PlantHeadset.com.

DISCLAIMER: The Bluetooth Wireless link here within is an open standard, unsecured technology. As such it is not recommended for First responders or other mission-critical users.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact with the transmitting antenna during transmitting.

PO Box 499
Fox Island, WA 98333
Tel: 253 238 0643 / fax 253 559 8555
Contact@planetheadet.com
www.Planetheadset.com

Version 2.00 OCTOBER 2020

Documents / Resources

| PLANETHAEDSET BTH-800-OHB PHS-700-800-900 Bluetooth Dual Muff Headset [pdf] Instructions
BTH-800-OHB, PHS-700-800-900 Bluetooth Dual Muff Headset
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>