AUTEL EZ200 Professional Scan Tool User Guide
- June 6, 2024
- AUTEL
Table of Contents
AUTEL EZ200 Professional Scan Tool
AUTEL.
Thank you for purchasing this AUTEL tool. Manufactured to a high standard, our tool will, if used according to these instructions and properly maintained, give you years of trouble-free performance
Getting Started
IMPORTANT : Before operating this unit, please read these instructions
and the user manual carefully and pay extra attention to the safety warnings
and precautions. Please use this unit as instructed. Failure to do so may
cause damage and/or personal 叮ury and will void the product warranty
NOTE : The images and illustrations depicted in this quick guide may
differ slightly from the actual ones. The user interfaces for iOS & Android
devices might be slightly different. The screenshots in this quick guide are
captured from the iOS device app
Download & install app
Scan the QR code or search for Autel Link 1n App Store or Google Play to download and ;nstaJI the app to your devK:e.
Register & log in
- Open the Auta Link app叩tap Register on the screen
- Follow the on-screen, nations to cut the ball.
Log in with your registered email address/ phone number and password
Add the dongle
- On the Mn Job, tap Me Device Manager Binding Equipment, the de•ice will aut call; jump to the next screen.
- Tap to scan the QR code ,printed on the Bl Bluetooth dongle or add the dongle by
Bind VCI with device
• After the scanning Is complete and the sent number automat,call retrieved, p
the Bind Equipment button at the bottom of the Interface to dongle with device
Find OBDII Port
Plug the connector, of the Bluetooth doing into the vehclesOBDIport Find OBDI
Port
Plug the connector, of the Bluetooth dongn to the vehicles 08011 port. .
Key On, Engine Off
Tum the vehicle lgn”1on to K”f On, Engine Off position. The LED on the dongle
wlll light solid connected
VCI Connection
For both Android and IOS devices, tap Me> Device Manager > AP2500 tor
dongle your device. For devices, tap Settings > Bluetooth on your IOS device
to open the Bluetooth function, on. Then tap the Bluetooth name on the screen
to w;1h the devices. Toe Bluetooth name starts with followed by the snag nber
of the dongle.
• Ensure your des Bluetooth name on
•When device, owned w,the dongle, the LED on the too wht sold blue.
UPDATE
Software : When a new version is available, an Update button will display. Tap the button to update the software. VCI Firmware: Tap Me > Device Manager > EZ200> Firmware Upgrade to update the firmware ff a new version is available
For service and support, please contact us
http://pro.autel.com I www.autel.com I
support@autel.com
0086-755-2267-2493 (China HQ) 11-855-AUTEL-US (288-3587) (North Amenca)
0049 (0) 6103-2000520 (Europe)/ -t-045 5948465 (APAC) I +971 585 002709 (IMEA)
©Autel Intelligent Technology Corp., Ltd. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>