Shenzhen Keding Hardware K207 Multifunctional Outlet Socket User Manual
- June 6, 2024
- Shenzhen Keding Hardware
Table of Contents
Shenzhen Keding Hardware K207 Multifunctional Outlet Socket
Item code: K207
Specification
- Configuration: 1 American power, 2 USB charging ports, overload protection switch, 1 wireless charger. See above pic.
- Rated voltage and current: AC 125V 12A
- Rated power: 1500W
- USB charging ports power: 10W(5V /2.1A)
- Max wireless charging power: 5W
Installation size: (unit: mm)
How to install
-
Fit this product into the tabletop and fix it with screws.
-
Press the button, the middle cover will pop up. Finally, plug your appliance to use.
Notes
- Follow the user manual to install, use and maintain this electric product
- For indoor use only. Keep away from moist, dusty, and corrosive environment likewise, which may degrade the product’s safety.
- Ground connection is a must during using.
- Overloading usage is prohibited. Follow the rated voltage, frequency, current and function to connect and use it correctly.
- Cut the electricity for the appliance before connect to this product.
- Cut the power supply before you install, maintain or take apart of this product
- Do not strike this product with sharp or hard tools, which may cause damage to this product.
- Do not operate with wet hand, or pull the cable forcibly.
- Stop using once you found any abnormity of the power socket.
Item code: K207
Specification
- Configuration: 1 American power, 2 USB charging ports, overload protection switch, 1 wireless charger. See above pic.
- Rated voltage and current: AC 125V 12A
- Rated power: 1500W
- USB charging ports power: 10W(5V /2.1A)
- Max wireless charging power: 5W
Installation size: (unit: mm)
How to install
-
Discharge the screws to fit the bottom box into the tabletop, fix it with screws.
-
Neaten cables inside the box in order to make sure they are not twisted. Fix panel with 2 screws. Finally, press and fix the power cable on the bottom box.
Notes
- Follow the user manual to install, use and maintain this electric product
- For indoor use only. Keep away from moist, dusty, and corrosive environment likewise, which may degrade the product’s safety.
- Ground connection is a must during using.
- Overloading usage is prohibited. Follow the rated voltage, frequency, current and function to connect and use it correctly.
- Cut the electricity for the appliance before connect to this product.
- Cut the power supply before you install, maintain or take apart of this product
- Do not strike this product with sharp or hard tools, which may cause damage to this product.
- Do not operate with wet hand, or pull the cable forcibly.
- Stop using once you found any abnormity of the power socket.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two cond itions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital d evice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote ction against harmful interference in a residential installation. This equipment generates uses and c an radiate radio frequency energy and, if not installed and used in accordance with the instructions , may cause harmful interference to radio communications. However, there is no guarantee that int erference will not occur in a particular installation. If this equipment does cause harmful interferen ce to radio or television reception, which can be determined by turning the equipment off and on, t he user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>