anko E95A Full HD WiFi Indoor Pan and Tilt Camera User Guide
- June 6, 2024
- Anko
Table of Contents
Anko E95A Full HD WiFi Indoor Pan and Tilt Camera
Welcome, Thank you for choosing our smart camera, getting started is easy. What’s included
Product Details
Connection Preparation
It is important that your phone is connected to 2.4Ghz home WIFI and not 5GHz.
To verify your mobile device is set to a 2.4Ghz WIFI network, navigate to the
Setting menu and click on Wi-Fi. In this menu, you will see all the detectable
networks in your area. Locate the SSID (the name of your network), and ensure
that the Wi-Fi SSID does not end with a 5G / 5GHz.
Check you have a strong WI-FI signal (at least two bars) in the location where the smart camera is to be installed. If you don’t have at least two bars signal on your phone, then you may need to reconsider the location or obtain a Wi-Fi extender to boost the WI-FI signal strength.
Install the APP and register Account
For the best experience, download the “Mirabella Genio” APP to your smartphone from the App Store or Google Play, or you can also scan the QR code below, the APP icon will be displayed after it has been installed successfully
Insert the Micro SD card (Micro SD card not included)
(optional, camera can work without it, but it will not able to record any
footage).
Rotate the camera by hand, let the camera lens towards the ceiling to expose
the Micro SD card slot. Insert the Micro SD card gently into the slot, please
pay attention to the direction of the Micro SD card, by looking at the
direction icon on the Micro SD card slot. don’t force it inside.
Micro SD card size needs >8GB, support up to Max of 128Gb.
Pairing the camera using Mirabella Genio App
- Connect the power to the camera using supplied DC 5V 1A Micro USB power adapter
- Wait for 30-40 seconds, the indicator light will be blinking RED rapidly (2 blinks per second) Camera is ready to pair.
- Open Mirabella Genio APP, tap on the “+” symbol, then choose Security & Sensor, and select your camera
- 4. Follow the APP’s instructions carefully to complete the network pairing process.
Video instruction is also available on the www.mirabellgenio.com.au
If after scanning the QR code, the indicator light changes from blinking Red to blinking Blue but failed to become solid Blue and you received a time out and/or device not found error, this is an indication of a communication error with the router, please ensure
- manually disable the 5Ghz Wi-Fi signal on the router setting
- the indicator light is blinking red rapidly as per APP screen (2 blinks per second)
- make sure you enter the correct 2.4Ghz Wi-Fi name and password if the led indicator light is not blinking red rapidly when turned on, power off the camera, wait for 10 sec, power on the camera, depress, and hold the reset button until the light starts to blinking red rapidly and repeat the pairing process again.
Camera usage Tips
Tap on the pencil icon you can access the camera’s settings page
changing the location or boost the WI-Fi Signal using Wi-Fi extender 
SD Card Recording: this option must be turned on if you want to record
footage into an SD card and view it in playback mode
Event recording: only records if it detects motion movement, motion
detection option must be on at the same time for it to work
Non-stop Recording: the camera will start to record 24/7, when SD is full
new footage will automatically overwrite the old footage without end-user
action
Format Memory card: delete all the contains on the SD card and format SD
into FAT32 format
We recommend using Scandisk, Verbatim, Kingston, Samsung Class 10 high-speed
micro SD for best performance, When using non-stop recording a 32GB card can
record up to 6 days of footage. Event recording can record up to 4 weeks of
footage. Remember the performance of a Wi-Fi camera relies heavily on the
performance of your router, before considering buying a new router or Wi-Fi
extender, please google topics such as “Improving WiFi Signal and Changing
Channels” and try out the settings suggested.
If you are using Telstra NBN or a dual-band router, you must disable the 5GHz
WI-Fi in order to make a successful connection and for the best overall
performance.
Please note that in Australia MOST smart products only work on the 2.4Ghz
signal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>