Jayanita Exports Usa Connector-Mini Bridge User Guide
- June 6, 2024
- Jayanita Exports Usa
Table of Contents
Quick Start Guide for
Connector Mini Bridge
Product Certification
Mini Bridge allows user to link their motorized shutters, blinds, and curtains into a Wi-Fi network, enabling control via smart APP and interaction with other loT products.
Step 1 Download APP
Please scan below OR code.
https://itunes.apple.com/cn/app/connector/id1344058317?mt=8
|
https://play.google.com/store/apps/details?id=com.smarthome.app.connector
---|---
Step 2
Please scan below QR code to learn more about linking up Mini Bridge with a
home Wi-Fi router, setup the Connector APP, and establishing connection with
other loT applications.
Program / Pairing:
Press and hold the program button for about 2 seconds, then release it until
the LED blinks purple.
Reset:
Press and hold the program button for about 10 seconds, then release it until
the LED blinks red.
Product Parameter
Indoor use only
Wi-Fi: 2.4GHz (802.11b/g/0)
Power Input:
DC 5V/1A (USB Type-A)
Radio frequency: 433.92MHz
Working temperature: 0C – 40 °C
Dimension(mm): L83.8 W30. 7 * H13.9
Status Indicator
| Color | Meaning | Duration |
|---|---|---|
| Constant Blue | Meaning | Constant |
| Constant Blue | Working fine | Continuously till status change |
| Slow Flashing Red | Working fine | Continuously till status change |
| Slow Flashing Red | Wi-Fi is disconnected | 5 times |
| Slow Flashing Yellow | Wi-Fi is disconnected | Continuously till status change |
| Slow Flashing Yellow | Wi-Fi is connected | Continuously till status change |
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>