850007706074 SwitchBot Remote User Manual

850007706074 SwitchBot Remote

Please read this user manual carefully before using your device.

Package Contents

List of Components

Getting Started

1. Download the SwitchBot app via the Apple App Store or Google Play Store.
2. Open our app and register a SwitchBot account or sign in directly if you already have one.
3. Open the battery cover, remove the plastic battery isolation tab, and you will see the indicator light start flashing.
4. Close the battery cover and turn on Bluetooth on your phone. Open the SwitchBot app, tap “+” on the top right of the home page, find the Remote icon and select. Then follow the instrutions and add your device.

Placement

After adding your Remote, you may place it anywhere.

• Option 1: Place it on a table.
• Option 2: Put it into the Remote holder. Peel off the tape liner on the back of the holder, stick it to a smooth surface and press it for 30 seconds to ensure it is firmly attached. Then put your Remote into the holder.
• Option 3: Add a lanyard to your Remote through the strap-hole for portable use. You may need to purchase a lanyard separately.
• Option 4: Draw pictures or write notes on the DIY stickers provided and then stick them to your Remote for personalized uses.

Pairing Remote

You can pair your Remote with SwitchBot devices like a Bot or a Curtain to control them.

How to pair a Remote:

1. When pairing, place your phone, Remote and the target device close to each other.
2. Open the SwitchBot app, tap the Remote card on the home page, tap the Key icon below Key Settings, then your phone will start to scan nearby available devices. Select your target device and set Remote actions for it.

Mapping Keys

The two keys on your Remote can be set individually to trigger actions of two different devices. One key can only trigger one action. For example, you can set the action of the concave key as closing/opening your Curtain, and the convex key as turning on/off your Bot.

Low Battery

When you see a red battery icon appear on the Remote card on the app home page, you may need to replace the battery.

Resetting Factory Settings

Press and hold both keys, and you will see the indicator light starts flashing. Hold the keys for 15 seconds and release when the light stops flashing. Then your Remote will emit a beep sound and the indicator light will light up for 1.5 seconds. Now your remote has been reset to factory settings.

Note: Since all previous settings of your remote will be
deleted after resetting, you will need to pair your Remote
again.

Specifications

• Model: W0301700
• Color: White
• Material: ABS plastic with UV-resistant coating
• Size: 37.1 × 43.1 × 13.4 mm (1.5 × 1.7 × 0.5 in.)
• Weight (with battery): 17.7 g (0.6 oz.)
• Battery: CR2450
• Network Connectivity: Bluetooth Low Energy

Warranty

We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover:

1. Products submitted beyond the original limited warranty period.
2. Products on which repairs or modifying have been attempted.
3. Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
4. Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
5. Damage due to misuse, abuse, negligence or casualty (e.g. fire).
6. Other damage that is not attributable to defects in the manufacture of product materials.
7. Products purchased from unauthorized resellers.
8. Consumable parts (including but not limited to batteries).
9. Natural wear of the product.

Contact & Support

• Setup and Troubleshooting:support.switch-bot.com
• Support Email:support@wondertechlabs.com
• Feedback: If you have any concerns or problems when using our products, please send feedback via our app through the Profile > Feedback page.

CE/UKCA Warning

RF exposure information: The EIRP power of the device at the maximal case is below the exempt condition, 20 mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).

CE DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment type W0301700 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address:
support.switch-bot.com

UKCA DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment type W0301700 is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the UK Declaration of conformity is available at the following internet address: support.switch-bot.com This product can be used in EU member states and UK

• Manufacturer: Woan Technology (Shenzhen) Co., Ltd.
• Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Subdistrict, Bao’an District, Shenzhen, Guangdong, P.R.China, 518100
• Wi-Fi: 2412 MHz to 2472 MHz (16.22 dBm)
• Operation temperature: -20 °C to 60 °C

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
This equipment complies with the limits of exposure to IC radiation defined for an uncontrolled environment.

• www.switch-bot.com
• V3.0-2209

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>