DAS 4 CN30 Fitness Tracker User Manual

June 6, 2024
DAS 4

CN30 fitness tracker
User Manual

Wearing method
Best to wear the bracelet after the styloid of the ulna; Please fit the adjusting holes according to your wrist size, and then do up the wristband buckle; The sensor should cling to the skin to avoid movement.

Charging the band
Please ensure the band has enough battery at your first time using it. Please charge the band first if it cannot be powered on, and then the band will automatically start working.

Power on/off

  1. In the shutdown state, please long touch the function key over 4 seconds to start the device with vibration;
  2. On the Power of the page, long touch the function key for more than 3 seconds to enter the shutdown interface, and short touch to select YES, the system will be powered off if no operation in 3 seconds.

Band operation

  1. In power-on state, short touch the function key to light up the screen to default page with date and time information;
  2. In the default time/date page, short-touch the function key can switch the band to different pages. The screen will be turned off if no operation in 5 seconds.
  3. In heart-rate/blood pressure page, long touch the function key to start the measurement. The result will be displayed in the 50s, and then the screen will be turned off automatically.

Install the band APP on the phone

To download and install “Yoko Sports”, pls scan the QR code below, or search in APP Store.

http://www.mcubemems.com/wp-content/uploads/2016/11/MS1001.apk

|

https://itunes.apple.com/us/app/yoho-sports/id1163658017?mt=8

---|---

System Requirements: Android 5.0 and above; iOS9.0 and above; Bluetooth 4.0 support.

Connecting band to APP

For the first time using the band, please connect it to the APP to calibrate the time and date, otherwise, the pedometer and sleeping monitor will not be accurate. The band will automatically be synchronized when successfully connected.

  1. After the band is bundled to APP successfully, the APP will save the band info, search and connect the band automatically if the APP is opened or running in the background.
  2. Pls ensure the band has all the required permissions of the system during installation or set the permission in your phone’s system settings, such as running in the background and reading contact information.

APP functions and settings

Personal information
Please set personal information after entering the APP; Settings —* personal settings, you can set the gender – age – height -weight. You can also set your daily exercise and sleep goals and monitor daily completion.

Message notification

Incoming call
In the connected state, if the incoming call reminder function is enabled, the band will vibrate when there is an incoming call, and the name or number of the incoming call will be displayed. (Need to set permission for APP to access phone address book)

SMS notification:
In the connected state, if the SMS remind function is enabled, the band will vibrate when there is an SMS.

Other remind:
In the connected state, if you turn on this feature, the band will vibrate when there are WeChat, QQ, Facebook, and other notifications on your phone, and the message will be displayed on the wristband. (Need to turn on the notification in a phone system, and set the permission of APP to access system notifications).

Vibrating reminder:
If turned on, the band will vibrate when there is a call, information, or another reminder. If turned off, there will only remind on-screen without vibration, so as not to disturb you.

Sedentary reminder:
Set to enable/disable the sedentary reminder function. You can set the reminding interval in the profile, thus the band will remind if you sit for a long time over that interval.

Tips for Android phone users:
The reminder function needs to be set to allow “Yoho band” to run in the background; it is strongly recommended to add “Yoho band” in the entitlement management to the trusted list and allow all permission to enable full functions.

APP features and settings

Smart alarm clock
In the connected state, three-alarm clocks can be set and synchronized to the band; an Offline alarm is supported. After successful synchronization, even if the APP is not connected, the band will still alarm according to the set time.

Band display settings
In this option, you can set the display pages on your band. The enabled function pages will switch one by one with your touch on the function key, and the disabled function page will not appear.

Looking for band
In the connected state, click the “Looking for the band” option, the band will vibrate to cause your attention.

Shake to take a selfie
In the connected state, enter the “shake to take a selfie” in APP, shake the band, and the APP will take photos automatically after 3 seconds countdown. Please allow APP to access the camera and photo album to take and save the selfie.

Function
Raise your hand to light up the screen: set the raise your hand to light up the screen, and the screen will automatically light up every time you raise your hand. Sedentary switch: please set the time of sedentary reminder and save it.

Band display settings
Replace the dial background, select the time position and then sync to the band.
After the APP prompts for successful synchronization, the display can be viewed on the band.

Band display instruction;
Long touch for 2 seconds on each page to enter the sub-menu of that function.

Date and Clock
After synchronization with the phone, the date and clock on the band will automatically be calibrated.
Standby Settings: Enter theme interface, can switch three themes.

Pedometer
Wear a band to automatically record your daily activity. You can view the real-time steps today.

Distance
Based on the number of your daily activity and your personal profile, the distance you traveled will be displayed.

Calories
Based on your walking distance and your personal profile, the calories burned will be displayed.

Heart rate, blood pressure
Switch to the heart rate or blood pressure interface, long touch to enter measurement page, and the result will be displayed in 40 seconds. This feature is only supported if the band has a heart rate or blood pressure sensor.

Motion Mode
Long touch to enter motion mode, short touch to switch to running mode, rope-skipping, or sit-up mode. Long touch to enter each mode.

Running mode
The pedometer count will start from 0 when switched to this model.
System time, lasting time, and activity number in this period will be shown in this mode. The activity number will be counted in daily numbers when quit to normal mode.

Rope-skipping mode
System time, lasting time and rope-skipping number in this period will be shown in this mode. The record will be cleaned after quitting.

Sit-up mode
System time, lasting time and sit-up number in this period will be shown in this mode. The record will be cleaned after quitting.

Weather
After synchronizing with the mobile phone, you can enter the weather interface to view the current weather, including weather conditions, the highest temperature, the lowest temperature, and so on.

Music control
Enter the music control interface, can play or pause music and switch the previous song or the next one.

Sleep mode
The bracelet will automatically monitor your sleeping status at the night; it will detect your sleep status with deep sleep / light sleep/wake times, calculate your sleep quality; the result can be checked on APP.

Note:

The band will track sleeping status only when you wore it during your sleep at the night. Place the band somewhere will not trigger the sleeping monitor. Sleeping status from 9:00 pm to 9:00 am will be recorded. Please synchronize your band with APP after 9:00 am the next day to upload the data before you check it.

Factory data reset
Long press 10 seconds in the MAC address interface to restore factory settings. Select YES to restore factory settings.

Specifications

Device type Smart band Battery Lithium polymer
Vibration motor support Connectivity Bluetooth 4.0
Operating temperature -10°C-50°C sensor Low-power accelerometer
System Requirements IOS 9.0 above / Android 5.0 above

Notices:

  1. Take off your band before having a shower or swimming.
  2. Please connect the band when synchronizing data.
  3. Use the 5V USB charging adapter.
  4. Do not expose the band to high moisture or extremely high temperatures.

Components
Host Wristband Charging cable Packing box and manual

APP Language:
English, SC, TC, Netherlands, Russian, French, German, Portuguese,
Spanish, Turkish, Japanese, Polish, Arabic, Malaysia, Thai, Czech, Slovak.

Wristband Language:
SC, TC, The European.

The warranty terms that cover the product are mentioned in detail on the official website www.das-4.com.

IP67 – Dust proof only.
Water contact is prohibited.

www.das-4.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals