AUTEL AP2500 Diagnostic/Service Scan Tool User Guide
- June 6, 2024
- AUTEL
Table of Contents
AUTEL AP2500 Diagnostic/Service Scan Tool
Web: www.autel.com
Thank you for purchasing this AUTEL tool. Manufactured to a high standard, our tool will, if used according to these instructions and properly maintained, give you years of trouble-free performance
Getting Started
IMPORTANT: Before operating this unit, please read these instructions and the user manual carefully and pay extra attention to the safety warnings and precautions. Please use this unit as instructed. Failure to do so may cause damage and/or personal injury and will void the product warranty
NOTE: The images and illustrations depicted in this quick guide may differ slightly from the actual ones. The user interfaces for iOS & Android devices might be slightly different. The screenshots in this quick guide are captured from the iOS device app
Download & install app
Scan the QR code or search for Autel Link in App Store or Google Play to
download and install the app to your device.
Register & log in
- Open the Auta Link app and tap Register on the screen
- Follow the on-screen instructions to complete the registration.
- Log in with your registered email address/phone number and password
Add the dongle
- On the Main Job, tap Me> Device Manager>Binding Equipment, the device will automatically jump to the next screen.
- Tap to scan the QR code imprinted on the Bluetooth dongle or add the dongle by mode.
Bind VCI with device
After the scanning Is complete and the serial number automatically
retrieved, tap the Bind Equipment button at the bottom of the Interface to
pair dongle with device.
Find 08011 Port
Plug the connector, of the Bluetooth dongle into the vehicle’s 08011 port.
• The vehicles OBDI port is generally located under the vehicle dashboard (Consult vehicle user manual for specific location.
NOTE: The interfaces in this quick guide are for reference only.
Key On, Engine Off
Tum the vehicle ignition to Key On, Engine Off position.
The LED on the dongle will light solid green when connected
Finish Installation
Your MaxiAP AP2500 dongle is now ready for use
UPDATE
Software: When a new version is available, an Update button will display. Tap
the button to update the software.
VCI Firmware: Tap Me > Device Manager > AP2500 > Firmware Upgrade to update
the firmware ff a new version is available
http://pro.autel.com I www.autel.com I
support@autel.com
0086-755-2267-2493 (China HQ) 11-855-AUTEL-US (288-3587) (North Amenca)
0049 (0) 6103-2000520 (Europe)/ -t-045 5948465 (APAC) I +971 585 002709 (IMEA)
©Autel Intelligent Technology Corp., Ltd. All Rights Reserved.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>