ACEFAST MG3 D3 Magnetic Wireless Charging Car Holder User Guide

Quick Start Guide

Functional components

Package Contents

Wireless charger x1
Air vent mount x1
USB-C cable x1
User Manual x1

Specifications

1. Assemble and tighten the product and the accessories through the ball joint (compatible with other ball joint accessories with 17mm diameter), fix in the ideal position. Connect the product with a QC3.0 car charger (optional) and the charging cable, plug in the cigarette lighter for charging.
2. After the product is powered on, the indicator light will turn on and wait for the phone to be placed. When the phone is placed, the magnetic suction force automatically absorbs the phone and aligns the coil. The product will start wireless charging, the indicator light is on with a breathing effect. If the phone doesn’t support wireless charging or if it detects a metal foreign object, the light flashes alternately for 5 seconds and then goes off. The maximum charging power of this product is 15W, the charging efficiency will vary according to the charging environment and mobile phone.
3. The best distance of wireless charging is within 3-5mm, and it cannot penetrate metal, so it is necessary to avoid using metal or too thick (over 3mm) mobile phone case, so as to ensure fast wireless charging of the mobile phone.
4. After the phone is removed from the product, the indicator will immediately show the standby status. When the car engine is off and the power supply stops, the indicator light goes off. The mobile phone is still attached to the product by magnetic force and can be taken off at any time.

Note:
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade. Mount to the blade and select the lock switch position according to the thickness of the blade. Suitable for one-key locking of the air outlet of most cars. Silicone pads for tighter clamp, better fit and to protect the car from scratches.

Shenzhen Houshuxia Technology Co., LTD
www.acefast.com | Support@acefast.com
Rm203, 2nd Floor, Building C, Youth Pioneer Park,
Jianshe East Road, Tsinghua Community,
Longhua Street, Longhua District, Shenzhen, P. R. China
Shenzhen, 518000, China

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.

Precautions

1. Do not use the product in the car at a temperature above 60 degrees
2. Do not use this product in professional racing or extreme off-road driving

Product Care
Keep away from liquids and extreme heat

Warranty & Customer Support
For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.

Amazon US orders: support1@acefast.com
Amazon EU orders: support2@acefast.com
Amazon UK orders: support3@acefast.com
Amazon CA orders: support4@acefast.com
Amazon JP orders: support5@acefast.com
Other region orders: support6@acefast.com
*Please note, ACEFAST can provide after-sales service for products purchased from any official ACEFAST store. If you have purchased from a local seller, you can also contact them directly for service or warranty issues.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>