FIAMMA M319 Additional Turbo Fan Kit Turbo-Vent 28 F Instruction Manual

FIAMMA M319 Additional Turbo Fan Kit Turbo-Vent 28 F

Package contents

Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.

• Nominal
  supply voltage

• Tension
  tolerance

• Min. feeding
  tension

• Maximum
  supply voltage.

• Power of
  nominal supply
  voltage

• Wire section

• Max. electric
  input

• Operating
  temperature

• Storage
  temperature

• Permanent air
  flow

INSTALLATION

Do not forget to arrange the electrical connection directly from the battery (only 12V – NOT 220V).
Connect the input cables of the electric motor.

Position the switch to “0” before connecting the power supply wires. Connect the motor wires to the reversing switch, then connect the 12 V power supply wires.

In case of problems please contact your local dealer.

Fiamma declines all responsibility for any personal injury and damage to property due to incorrect assembly or use of the product; it is suggested to keep the instructions inside the vehicle. The assembly of the product must be carried out according to the assembly instructions: the product must not be modified in any way.
Periodically check the tightness of all the screws in the accessory, especially after the first kms from the installation and each time before and after long journeys. Before starting the vehicle, check that the rooflight is properly closed. Periodically check that the cover is intact. Don’t open the rooflight when the vehicle is traveling. Don’t open the rooflight in case of strong wind or rain. Remove snow or ice from the rooflight. The maximum permitted speed of the vehicle with a mounted rooflight is 130Km/h. Always comply with speed limits and the Highway Code. The speed should always be suitable to traffic conditions and towed load.

CARE AND MAINTENANCE

For the internal and external cleaning of the rooflight, always use only neutral, non-aggressive detergents. For cleaning the Crystal cover use an acrylic glass cleaner with a soft cloth so as not to scratch the surface. Never use aggressive products such as glass cleaners, all-purpose cleaners, abrasives or dish-washing detergents.
Also, never use alcohol-containing detergents, solvents or any corrosive liquid. The mosquito net can be cleaned with water and a neutral detergent by removing it from the press fittings.

Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

EU Declaration of Conformity (DoC)

We,
Company name: Fiamma S.p.A.
Postal address: Via San Rocco, 56
Postcode and city: Cardano al Campo – (Varese)
Telephone number: 0311/709111
E-mail address: fiamma@fiamma.it
Declare that the DoC is issued under our sole responsibility and belongs to the following product:
Apparatus model / Product: Roof Light with fun
Trademark: Fiamma
Model / Type:
04919-01y Turbo 28
C4919-01y Turbo 28 (Bulk Pack)
07903-01- Kit Turbo Vent 28 F
07903-02- Kit Turbo Vent 28 F
C7902A01y Turbo 28 F (Bulk Pack)
C7902A02y Turbo 28 F (Bulk Pack)
03623F01y Turbo Vent
03624F02y Turbo Vent
C3623G01y Turbo Vent P3 (Bulk Pack)
C3624G02y Turbo Vent P3 (Bulk Pack)
03623H01y Turbo Vent Premium
03624H02y Turbo Vent Premium
07501-01- Kit Turbo Vent F Premium
07501A01- Kit Turbo Vent F
07501B01- Kit Turbo Vent F P3

y = – White; B/D = Crystal
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

• 2014/30/EU Electro Magnetic Compatibility Directive (EMCD).

• 2014/35/EU Low Voltage Directive (LVD).

• 2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive).

• ECE/ONU/R10 Uniform provisions concerning the approval of vehicles with regard to
  electromagnetic compatibility – R10.

• ECE/ONU/R43 Uniform provisions concerning the approval of safety glazing materials and their
  installation on vehicles – R43 (only for Turbo 28, 28 F, Vent, Vent P3 and Vent Premium).

• EN 55014-1:2006 + A1:2009+ A2:2011 – RCM (only for Turbo 28, 28 F and Turbo Vent
  Premium).

• EN 61000-3-2:2014 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).

• EN 61000-3-3:2013 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).

• EN 55014-2:2015 – RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
  The following harmonized standards and/or technical specifications have been applied

fiamma.com
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)

All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,specifi cations and models or to cease production of any model.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>