SACKit ACK70001 WOOFit Headphones User Manual
- June 6, 2024
- SACKit
Table of Contents
WOOFit HEADPHONES
User Manual
Thank you!
Thank you for purchasing this WOOFit Bluetooth Headphone from SACKit. Please
read the entire instruction manual before using the product and save it for
future reference. We reserve the right for any errors in text or images and
any necessary changes made to technical data. If you have any questions
regarding technical problems please contact our customer services. We hope you
will enjoy your new WOOFit headphone.
CONGRATULATIONS on your new SACKit product!
Register your new SACKit product and get the chance to WIN! Every three months we pick a winner among the registries. The winner receives a gift certificate worth €700,-
- Go to www. sack it.EU/reg
- Enter name, e-mail, and product
- Be a winner!*
*When you register your product, you agree to receive email newsletters from SACKit. The winners will be contacted directly via e-mail. The gift certificate can be used for all items on the webshop.
Box contents
1. WOOFit headphone
2. USB charging cable
3. 3.5mm audio cable
Quick start guide
- Charge the WOOFit Headphones using the included USB charging cable for no less than 4 hours
- Long press the MFB Button for 10 seconds until the LED light is flashing red and blue (this will turn on your WOOFit Headphone, and afterward put it in pairing mode)
- Turn on Bluetooth on your device
- Choose WOOFit Headphones in the Bluetooth settings on your device
- Start playing music on your device
- Nod your head and dance
Description of the appliance
Battery charging
- Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/290mAh
- Power: USB DC5V, Please use the USB cable sealed with our headphones for charging
- Charging Time: For first-time use please be sure the battery has been charged fully before use. It needs more than 4 hours of charging the first time, then 2-3 hours for recharging
- When the red light is on, the headphone is in charge mode. The red light will turn off when the battery is fully charged.
How to pair WOOFit Headphone with Bluetooth devices
First time pairing:
- Long press the MFB button for 10 seconds until the LED light is flashing red and blue (flashing red and blue LED light indicates successful entering pairing mode). After the first 5 seconds, you will hear the ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode
- Please keep the headphone and Bluetooth device in range of 1 meter when pairing and make sure your headphone is on
- Go into the Bluetooth settings on your device and search for new Bluetooth devices and select WOOFit Headphones
- Long press the MFB button to turn off your WOOFit Headphone
Operation instructions for use after first pairing:
- After the first time pairing your WOOFit Headphone and your Bluetooth device will automatically stay connected
- Turn the headphone on by holding down the MFB button until you hear the ON sound
- Long press the MFB button to turn off your WOOFit Headphone The LED light will blink blue once the headphone is successfully paired.
Notes: If the pairing is not successful, please turn the headphone off and on and then try to pair again.
Making calls with the headset
Functions | Status of head-phone | Operation |
---|---|---|
Redial Last number | Standby mode | Short press MFB twice quickly |
Volume up | Conversation mode | Short press Volume + button |
Volume down | Conversation mode | Short press Volume -button |
Answering calling | Ringing | Short press MFB button |
End call | Conversation mode | Short press MFB button |
Reject calling | Ringing | Press and hold the MFB button for one second, and |
release until you hear an indication sound
Transfer the calling between headset and Bluetooth devices| Conversation mode|
Pressing and holding the MFB button for 3 seconds can transfer the
conversation from headset to mobile phone.
Then press and hold the MFB button for 3 seconds
to transfer the conversation back from the mobile phone
to the headphone.
Notes:
Not all mobile phones support all the functions listed above. Please refer to
the instruction on your mobile phone.
Some functions and indication tones may vary with mobile phones
Playing Music
When the headphone connects with the mobile phone or Bluetooth transmitter, you can enjoy music through the headphone wirelessly.
Function | Status of headset | Operation |
---|---|---|
Pause | Playing music | Short Press MFB button |
Play | Pausing | Short Press MFB button |
Next track | Playing music | Short press volume + button |
Previous track | Playing music | Short press volume -button |
Volume + | Playing music | Long press volume +button |
Volume – | Playing music | Long press volume -button |
Notes:
- For some mobile phones, the music will transmit to the speaker of the mobile phone instead of the headphone, If that is the case, you have to choose to TRANSMIT THE SOUND THROUGH BLUETOOTH in the SETTINGS of the music play interface on your mobile phone and then choose a model name in the device list, so the music will be transmitted to the headphone. Please refer to the instruction on your mobile phone for further information.
- In order to use the on-headphone controls, your mobile phone or Bluetooth transmitter must support AVRCP
Operation instructions for in-line use:
Use the wire when you do not wish to use a Bluetooth connection or when the battery needs recharging. In-line use is also possible when the battery is empty.
- Connect the 3.5mm plug into your WOOFit Headphone 3.5mm jack, then connect the other 3.5mm plug to your mobile phone 3.5mm jack. Please connect the wire the same way as shown in the picture for a successful connection.
- Adjust the volume using the controls on your mobile phone. The in-line control button on the headset does not control the volume.
In – line button function as below. Android, BlackBerry, WindowsPhone
Number of button presses | Hands-free function | Music mode |
---|---|---|
Short press button | Answer/End call | Play/Pause |
iPhone/iPad/iTouch
Number of button presses | Hands-free function | Music mode |
---|---|---|
Short press button once | Answer/End call | Play/Pause |
Short press button twice | End call | Next track |
Short press button three times | End call | Next track |
Remark: Some mobile phones may not be compatible with headphones due to different settings.
Troubleshooting
-
There is no sound coming from the earphones
Please check the volume on your audio device to make sure it is outputting sound. Please make sure that the 3.5mm plug is fully in-sorted into your audio device. Sometimes a case or protective cover can prevent a good connection. Please make sure the earphone plug and audio device jack is clean. -
I’m hearing a beep sound. When your WOOFit Headphones make a beep sound, they need recharging. Please charge your headphones fully.
-
The headphone is not fitting comfortably.
Please adjust the length of the band by pull/pushing the pole as below. -
If you are having trouble with using the hands-free microphone and play settings controller.
Please refer to the table in this manual that describes the various function of the hands-free microphone and play settings controller.
If you are still having trouble, or if your device platform is not listed in this manual, please consult your mobile device’s instruction manual.
Caution
- Please recharge your battery if you can’t turn on the headphone
- Please turn off your headphone after your usage to get a longer battery life
- Please use the charging USB packaging together with the headphone
- Please don’t change any other battery
- Keep the headphone in a safe place free from dust, liquids, and extreme temperatures
- Do not exposure or toss headphones into the fire. It will probably cause an accident
- Please don’t try to disassemble the headphone if you are not an expert
- Please don’t use chemicals to clean the product
Specifications
Bluetooth Solution: CSR
Bluetooth version: V4.0
Support agreement: A2DP, AVRCP, HFP, HSP
Operating distance: 10M
Battery: 290MAH
Charging time: about 3 hours
Charging current: 170MA
Playing time: 12 hours
Driver Unit: Ø40mm
Sensitivity: 105dB/1mW(S.P.L at 1KHz)
Impedance: 32Ω
Frequency Range: 20Hz-20KHz
Rated Power: 10mw
Max. Power: 20mw
Complaints
If you have any complaints or have a defect WOOFit Headphone please contact
our customer service. When you have a defect you need to inform your serial
number. You will find the serial number on the back of the packaging – please
note this number if you dispose of the packaging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>