Shark HV302 Rocket Ultra Light Vacuum Cleaner User Guide
- June 13, 2024
- Shark
Table of Contents
Shark HV302 Rocket Ultra Light Vacuum Cleaner
Product Information
The Ultra-Light Vacuum is a versatile cleaning tool that is designed to
provide efficient and convenient cleaning for both floor and above-floor
surfaces. It comes with various accessories and features for effective
cleaning. The product includes:
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your
unit.
- Handheld Vacuum
- Motorized Floor Nozzle
- Wand
- 5.5 Crevice Tool
- Pet Multi-Tool
- Home & Car Detail Kit
- Under-Appliance Wand
Product Usage Instructions
Assembly
To assemble the Ultra-Light Vacuum, follow these steps:
- Attach the Motorized Floor Nozzle (B) to the Handheld Vacuum (A) by clicking them together.
- Connect the Wand (C) to the Handheld Vacuum (A) by clicking them together.
- Attach the desired cleaning accessory (E, F, or G) to the Wand (C) or Handheld Vacuum (A).
Storage:
To store the Ultra-Light Vacuum, follow these steps:
- Hang the Handheld Vacuum (A) on the Storage Hook (located on the bottom of the wand).
- Wrap the power cord around the cord hooks.
- Store the unit easily in a closet or along a wall.
Maintenance:
To maintain the Ultra-Light Vacuum, follow these guidelines:
- Empty the dust cup every time debris reaches the MAX fill line.
- Hand wash filters only with water to prevent damage from cleaning chemicals.
- Allow ALL filters to air dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
- To clean the brushroll, open the three locks on the bottom of the floor nozzle and lift off the cover. Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. Loosen debris by cutting across the groove on the brushroll with a pair of scissors.
Floor Cleaning:
To clean floors with the Ultra-Light Vacuum, follow these steps:
- Plug in the vacuum.
- Place your foot gently on the floor nozzle and tilt the handle back.
- Choose Setting I for gentle cleaning on bare floors and small area rugs. The brushroll spins slowly to clean bare floors and small area rugs. Use Setting II for deep-cleansing carpets by removing embedded dirt. The brushroll spins faster to pick up debris below the surface of your carpets. (Note: For deep cleaning per ASTM F 608, use Setting II in carpet mode.)
Above-Floor Cleaning:
To clean above-floor surfaces with the Ultra-Light Vacuum, follow these steps:
- While holding the vacuum upright, push the Nozzle Release button and pull the wand up to disconnect it from the floor nozzle. Alternatively, press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.
- Attach the desired cleaning accessory (E, F, or G) to the Wand or Handheld Vacuum. Use Setting I for all above-floor accessories.
For any questions or to register your product, please visit us online at sharkclean.com.
WHAT’S INSIDE
- A Handheld Vacuum
- B Motorized Floor Nozzle
- C Wand
- D 5.5″ Crevice Tool
- E Pet Multi-Tool
- F Home & Car Detail Kit
- G Under-Appliance Wand
ASSEMBLY
STORAGE
Onboard Hook For compact, convenient storage, hang the handheld vacuum on the hook on the bottom of the wand, and wrap the power cord around the cord hooks. The unit stores easily in a closet or along a wall.
MAINTENANCE
Empty the dust cup every time debris reaches the MAX fill line.
WARNING:
- Hand wash filters only with water to prevent damage from cleaning chemicals.
- Allow ALL filters to airdry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
Brushroll Maintenance
To access the brushroll, open the three locks on the bottom of the floor nozzle and lift off the cover. Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. Loosen debris by cutting across the groove on the brushroll with a pair of scissors.
VERSATILE FLOOR-TO-CEILING CLEANING
FLOOR CLEANING
- Plug In Vacuum Then place your foot gently on the floor nozzle and tilt the handle back.
- Choose Setting The Rocket® Ultra-Light Upright has a 2-speed power slider switch on the handle. Slide the power switch to the appropriate floor setting and start cleaning.
ABOVE-FLOOR CLEANING
-
While holding the vacuum upright, push the Nozzle Release button and pull the wand up to disconnect it from the floor nozzle.
Press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum. -
Attach desired cleaning accessory
For questions or to register your product, visit us online at
sharkclean.com
NOTE: Use Setting I for all above-floor accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>