EKSA E1 Bluetooth Headphones User Manual

E1
USER MANUAL

Thank you for choosing EKSA E1. Please follow all sides of this user guide to ensure proper use and keep it for future reference.

Specifications

Package Contents

1 EKSA Bluetooth Stereo Headphones (E1)
1 Micro USB Charging Cable
1 3.5mm Audio Cable
1 Carry Bag
1 * User Guide

Product Overview

1. Volume up/ ****Short press
   Next track  Long press

2. Multifunction On/Off Call/Answer/Hang-up
   button Play Pause

3. Volume down/ ****Short press
   Previous track Long press

4. Super EQ/Voice Assitant

5. LED indicator—Bluetooth, Charging, Power on

6. 3.5mm audio input

7. Microphone

8. Micro-USB input

9. 3.5mm audio cable

Getting started

Charging the headphones
You can charge the headphones regardless of their power state (on or off).

1. Connect the micro-USB plug of the charging cable to the micro-USB input of the headphones.
2. Connect the USB plug to the USB port of your computer. If you are using an external power adapter, connect the USB plug to the power adapter or to the USB car charger adapter, and connect to the power source.
   A complete charging cycle takes about 3 hours. Before using the headphones for the first time, charge the headphones for a complete charging cycle without interruption. When being charged, the LED indicator lights up as Red constantly and will turn into Blue when fully charged. When the battery drops to a low level, a “beep” tone will be heard prompting you to recharge the headphones. It is recommended to charge the headphones using only the supplied USB cable. You can’t continue playing music or making calls on your smartphone while the headphones are being charged.

Pairing the headphones with a Bluetooth device
Ensure that the headphones are within 1m range of your smartphone and that Bluetooth is activated on the headphones when performing this procedure.

1. Switch the headphones on, press the Multifunction button for 3 seconds or until you hear the voice prompt “pairing”. The LED light flashes red and blue alternately. The headphones are in pairing mode.
2. Activate Bluetooth on your smartphone.
3. On your smartphone, start a search for Bluetooth devices. All active Bluetooth devices in the proximity of your smartphone is displayed.
4. From the list of found Bluetooth devices, select “EKSA E1”. If necessary, enter the default PIN code “0000”.
   If the pairing was successful, you hear the voice prompt “connected”. The LED will flash blue occasionally.

Connect with two Bluetooth devices simultaneously

1. Connect headphones with the first device as above. Then turn off the Bluetooth on the connected device.
2. Connect headphones with the second device as above.
3. Turn on the Bluetooth on the first device. Tap and select “EKSA E1” to connect them.
4. Now the headphones should be connected with both devices simultaneously.
   NOTE: EKSA E1 only has one audio channel, if you want to play music from another Bluetooth device, please pause the current device’s music first.

Adjusting the headband
For good sound quality and the best possible wearing comfort, you can adjust the earpad location on the headband to properly match the size of your head. Wear the headphones so that the headband runs over the top of your head. Adjust the location of the earpads by moving the cups up and down of the headband slider until:
—your ears are comfortably covered by the ear pads.
—you feel even, gentle pressure around your ears.
—a sung fit of the headband in the head is ensured.

Using the headphones

Switching the headphones on
Press the multifunction button for 3 seconds. You hear the voice prompts “ power on” and the LED flashes between blue and red when the headphones are active.
Switching the headphones off
Press the multifunction button for 3 seconds. You hear the voice prompt “power off ” and the LED light turns off, indicating the headphones are off.
Adjusting the volume
Press the volume +/- buttons once to increase or decrease the volume. When the maximum or minimum volume is reached, you hear an alert tone.
Playing music wirelessly
The following music functions are only available when the headphones and your device are connected via Bluetooth. Some smartphones, music apps, or players may not support all functions. Playing/pausing music: quickly press the multifunction button. Playing the next/previous track: press and hold the volume+/- button
Playing music using the audio cable
Use the audio cable to listen to music when the headphones are running out of battery or when Bluetooth transmission is restricted or not allowed. The headphones immediately switch off once the audio cable is plugged into the audio input.
Inserting the audio cable

1. Insert the 3.5mm jack plug into the audio input of the headphones. Bluetooth is deactivated.
2. Connect the 3.5mm jack plug to the audio output of your smartphone.

Super EQ Technology
Press the SuperEQ button and hold for 3 seconds to activate the bass boost mode transforming your audio into an immersive experience with powerful bass you can feel.
Making calls on the headphones

1. Making a call: Dial the desired number on your smartphone. If your smartphone does not automatically transfer the call to the headphones, select the EKSA E1 as the audio source on your smartphone (see the instruction manual of your smartphone if necessary).
2. Accepting/rejecting/ending a call: Press the multifunction button once to accept and end the call, press and hold the multifunction button to reject an incoming call.
3. Redialing: You can use this function when the headphones are not actively playing music or are used for making calls. Press quickly the multifunction button twice to redial the last number called and press the multifunction button once to cancel the redialing. During the call, you can adjust the volume by pressing the volume+ or volume– button on the headphones.

Accessing Voice assistant
You can use this function when the headphones are not actively playing music or are used for making calls.

1. Press the Voice assistant/Super EQ 4 button once to active Siri or Google assistant.
2. Say your voice command, such as “Call Jack”. The Bluetooth smartphone dials the phone number of Jack.

Clearing the previously paired devices

1. Set the headphones to pairing mode.
2. Simultaneously press the volume+ button and volume – button for 4 seconds. The LED flashes between red and blue. The headphones are permanently disconnected from all devices and immediately go into pairing mode. The Bluetooth mode switches off once the audio cable is plugged into the audio input. Forced pairing mode: Press and hold multifunction for 5 seconds to enter the forced pairing mode directly when E1 is unable to enter pairing mode.

Limited Warranty
Please sign up for the EKSA warranty service at www.eksa.net. EKSA warrants that this product, be for 2 years from the date of retail purchase by the original end-user. And it is delivered from EKSA authorized reseller, in original package, in new condition, and is free from any defects in manufacturing and workmanship. We will repair or replace (using new or refurbished replacement product) any defective product within a reasonable period and free of charge.

What is not Covered

This warranty does not cover defects resulting from improper or unreasonable use or maintenance; failure to follow operating instructions; accidents; excess moistures; insects; lightning; unauthorized alteration or modification of original condition; damage caused by inadequate packing or shipping procedures; loss of, damage to or corruption of stored data; damage caused by use with non-EKSA products; the product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by their modifications; and products purchased from unauthorized dealers.

How to Make a Claim

In the event damage has occurred to products, you must follow these instructions:

• Please contact info@eksa.net soon with the order number on the e-commerce website after you discover a product defect (or should have discovered it, if such product defect was obvious);
• In order to get professional solutions from EKSA, please give a detailed explanation of how the damage occurred.
• Return the products. EKSA will, at our sole option, repair or replace (using new or refurbished replacement parts) any defective parts within a reasonable period of time and free of charge. parts) any defective parts within a reasonable period of time and free of charge.
  Email us at info@eksa.net with faulty products. Please attach the video and the description of the product. We could solve the problem with more details timely. Those who email with videos and detailed descriptions will be awarded 1 gift product.

Other Legal rights

This limited warranty gives you specific legal rights, and you also may have other rights that vary from state to state or country to country. Some places do not allow limitations on implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Thank you for choosing EKSA. We hope you enjoy our product. Do you like the purchase experience in our store? We d appreciate it if you can share your fair product review and feedback. If you are not completely satisfied, please reply to info@eksa.net or you can contact us via HongKong Customer Center: +852 6940 4955 (Mon to Fri 9:00 am- 6:30 pm, UTC+8 HKT) India Customer Center: +91 84319 76061 (Mon to Sat IST 9:30 am-6:00 pm) so that we may address your concerns before you leave a product review.

Note

• If you can’t connect the headset/headphones to your devices, please ask us for complete FAQ guidance. You can find the solution finally.
• Depending on your head/ear size/shape, it may be a little tight (feels like“on ear”) for someone to wear which is designed to avoid sound leakage. In case of that and to get both audio and wearing comfort, please take off the headphone every 1~2 hours to get your ears relaxed and protect them from the muggy environment in use.
• Please follow us on Facebook @EKSA Global, Twitter, Instagram, and YouTube @EKSAtech for new product release and promotion info.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>