OMEGA DPG210-KIT Pressure Calibration Kit User Guide
- June 6, 2024
- Omega
Table of Contents
- OMEGA DPG210-KIT Pressure Calibration Kit
- LCD AND CODE DISCRIPTION
- BUTTON FUNCTION
- APPEARANCE
- POWER
- PRODUCT SIZE
- FUNCTION DISCRIPTION
- FUNCTION SETTING
- Pneumatic and Hydraulic hand pumps
- INSTRUCTIONS:
- PRECAUTION:
- PROBLEMS AND SOLUTION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OMEGA DPG210-KIT Pressure Calibration Kit
The DPG210-KIT pressure calibration kits combine the high accuracy of our
DPG210 digital pressure gauges with a pneumatic or hydraulic hand pump,
providing an excellent solution for field calibration needs. Kits include the
DPG210 digital gauge in your selected pressure range, hand pump, rugged
carrying case, and a selection of fittings and hose. Kits with ranges of 500
psi or below includes a pneumatic hand pump capable of generating 0 to 500 psi
pressure. For ranges of 1,000 psi or higher, a 0 to 10,000 psi hydraulic hand
pump is included.
NOTICE
- Please check the packaging and appearance after you received the product.
- Please check the mode and specification of the product. Ensure correct electrical connection and mounting method.
- Power: three AA battery or USB-power.
- During use, please note the technical and operation conditions: the temperature of medium, burst pressure, power supply.
- This product is a precision device, DO NOT use hard objects to touch the diaphragm or disassemble.
- During installation, do not install or uninstall with excessive forces, take special care with the installation of thread.
- Please install or uninstall with a suitable wrench.
- After starting the gauge, it is a normal phenomenon to take a few minutes to stabilize and work normally.
- During installation, the gauge may be affected by installation stress. After installation, please clear zero with no pressure applied.
- Product damage caused by non-professional operation according to the operation instructions is not within the scope of the warranty.
LCD AND CODE DISCRIPTION
BUTTON FUNCTION
APPEARANCE
POWER
Two modes power: Battery or USB
- Battery: Three AA battery
- USB: USB2.0 5 volt power 5V 0.15A
PRODUCT SIZE
FUNCTION DISCRIPTION
FUNCTION SETTING
Notice: The oil cup is made of plexiglass. It is forbidden to contact with volatile media such as alcohol, dimethyl pump, ether, etc., to avoid damage to the oil cup
Pneumatic and Hydraulic hand pumps
The Pneumatic and Hydraulic hand-held pumps are both used in conjunction with
the DPG210 digital pressure gauge. It is a fast pressure source. It can easily
achieve vacuum and positive pressure by adjusting the pressure and vacuum
valve. It is suitable for calibrating various differential pressure, vacuum,
pressure vacuum and pressure meters. It can also be used as the above-
mentioned meters. Pressure vacuum source. It is portable, light in weight,
light in operation, easy to carry and use, and can be used with pressure and
vacuum instruments. Ranges lower than 500 psi are for the Pneumatic hand pump
and ranges higher than 500 psi are for the Hydraulic hand pump.
The pressure fine-tuning handle is designed in structure, and the output
pressure can be easily changed by rotating the fine-tuning handle. In
addition, there is a high-pressure hose connection to be calibrated meter,
output port connection standard meter. The hand-held pressure pump can be
carried to the site and directly connected with the instrument to be
calibrated, and the calibration is quick and simple. It is used to verify the
pressure measuring instruments installed on site and various pressure
instruments used in the control room. It can also provide a pressure source
for the factory calibration of pressure measuring instruments.
- Output pressure:
- Pneumatic (Ranges 100-500 psi): -13.78~595 psi
- Hydraulic (Ranges >500): 0~10007 psi
- Working environment:
- Temperature: 0-40℃ (0-104℉)
- Threaded interface: ¼ NPT
- Weight: 2.0KG
- High-pressure hose connector thread: ¼ NPT internal thread
INSTRUCTIONS:
- After connecting the meter, close the pressure relief valve, and then hold the handle to start pressing (just a light hold with your hand)
- Push the pressure vacuum valve from one side of the reversing mark “V” to the other side to easily achieve vacuum; push the pressure vacuum valve from one side of the reversing mark “P” to the other side to easily achieve positive pressure
- In order to obtain an accurate pressure value during positive pressure, it can be achieved by a fine-tuner in a small range.
- After the pressure is suppressed, first release the pressure through the pressure relief valve, and then remove the meter.
PRECAUTION:
- During the calibration process, attention should be paid to keeping all connections sealed. After calibration, the pressure relief valve must be rotated to release the pressure before disassembling the instrument, otherwise the instrument may be damaged.
- For the Hydraulic pump: Before using the pressure pump, unscrew the breather, fill it with a proper amount of oil (such as 1/2 cylinder of special oil), then tighten the breather, hold it firmly, loosen the handle, and drive out the gas in the cylinder for use
PROBLEMS AND SOLUTION
Servicing North America:
U.S.A. Omega Engineering, Inc.
Headquarters: Toll-Free:
1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378
(USA & Canada only)
Engineering Service: 1-800-
872-9436 (USA & Canada only) Tel: 203-359-1660 e-mail: info@omega.com For Other Locations Visit omega.com/worldwide Fax: 203-359-7700
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>