SONOS Arc Premium Smart Soundbar for TV User Guide

SONOS Arc Premium Smart Soundbar for TV

Important Safety Information

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
    dropped.

13. The Mains plug should be readily available to disconnect the equipment.

14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

Arc

The premium smart soundbar for TV, movies, music, and more—

• 3D sound with Dolby Atmos.

• Eleven high-performance drivers, including custom elliptical woofers and angled side tweeters for rich bass and clear dialogue.

• Arc’s advanced processing creates five phased-array channels that deliver sound to your ears from all directions.

• Quick and easy setup, with only one cable to connect to your TV. Elegant design discreetly mounts to the wall or sits on a credenza beneath the TV.

• Expandable. Add a Sub and a pair of Sonos speakers (Sonos One or Sonos Five), for 5.1 surround sound.
  For more information, see Sonos home theater.

• Set up and control with the Sonos app (for Android and iOS).

• See Getting started when you’re ready to add Arc to your Sonos system.
  Controls and lights Swipe, touch, tap, or ask—with Sonos Arc you’ve got choices on how to control sound.

• Use the touch controls—touch or swipe across the controls.

• Voice control—set it up and use your voice to turn the TV on or off, adjust the volume, or play music.

• Use the Sonos S2 app.

• Use your TV remote control.

Connector panel

Select a location
You can wall mount Sonos Arc under your TV or place it on a credenza.
Place on a credenza

• Place horizontally on a stable and level surface.
• Keep 4.0″ (102 mm) space (minimum) between the top of Sonos Arc and the bottom of your TV (if placing Arc below the TV).
• Don’t place vertically or on its side.
• Make sure the touch controls are facing up.

Wall mount
To put Sonos Arc on a wall, see Wall mount.
Connect the cables
Before you start

1. Disconnect existing home theater or surround sound equipment from your TV.
2. Connect any external devices, like a cable box or DVD player, directly to your TV.
3. Turn your TV on.

Connect the power cord

1. Insert the power cord firmly into Arc’s power port until it’s fully connected.
2. Plug the other end into a power outlet.
   Caution: Use only the supplied power cord (using a third-party power cord will void your warranty).

Connect Sonos Arc to your TV

Use the HDMI cable to connect the soundbar to your TV. If your TV doesn’t have an ARC or eARC port, you’ll need to use the optical adapter too (the app guides you through it during setup).

1. Fully insert the HDMI cable into Arc’s HDMI port.
   

2. Connect the HDMI cable to your TV:

   • If your TV has an HDMI ARC or eARC port, plug the HDMI cable directly into the TV port labeled ARC, eARC, or ARC/eARC.
   • If your TV doesn’t have an HDMI ARC port, you’ll need to connect the optical audio adapter (included) to your TV’s Digital audio out instead.

HDMI ARC or eARC
HDMI ARC is a special port that looks like a standard HDMI port—it may be on the back or side of your TV.
The ports look similar, but the ARC port will be labeled ARC, eARC, or ARC/eARC. If you connect Sonos Arc to a standard HDMI port instead, you won’t hear any sound.

Note: For TVs that don’t have an ARC port, use the optical audio adapter (included) to connect Sonos Arc to your TV’s Digital audio out.

Digital audio out

If your TV doesn’t have an HDMI ARC or eARC port, you’ll use the optical audio adapter (included) to connect to your TV’s digital audio out port.

1. Remove the protective cap from the adapter.
2. Attach the optical adapter to the HDMI cable.
3. Connect the optical adapter to the TV’s optical digital OUT port.
   Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port.
   Inserting the adapter incorrectly may damage the cable.
   If you don’t have the free Sonos app, download it from the app store. You’ll need it to set up and control your Sonos system. See Getting started.

Microphone on/off
Touch on your Sonos Arc to turn the microphone on and off. (If you don’t have a voice service installed, the microphone is inactive.)
When the microphone light is on, voice control is on and your voice assistant is ready to respond. When the microphone light is off, voice control is off.
Note: If you’ve installed a voice service and the microphone is off, you can still use voice commands. Just press and hold —no need to start with a wake word. When you release the microphone button, voice control turns off again.

Wall mount

Guidelines

• Use the Sonos Arc wall mount kit. You can buy it on www.sonos.com. Follow the instructions in the kit.
• Keep 4.0″ (102 mm) space (minimum) between Sonos Arc and your TV.
• Make sure the touch controls are facing up.
• For best sound quality, keep both ends of Arc at least 1′ (30cm) from a wall or other obstruction.

Mount kit contents

• Wall mount bracket
• Positioning guide (don’t discard—it may look like packing material)
• 2 knobs
• 6 wall anchors
• 6 screws
  Note: Don’t discard the positioning guide. It may look like packing material.

1. If your TV is wall-mounted, place the positioning guide against the wall, aligning the top edge with the bottom of your TV. There should be 5.5″ (140 mm) between the top of the wall mount bracket and the TV.

2. Mark the screw locations and remove the guide. Refer to Wall mounting information for placement help.

3. If you’re using the included wall anchors, use a 5/16″ drill bit to drill the pilot holes and then insert the wall anchors. Don’t use the anchors if you’re drilling into wood or plastic.

4. Position the wall mount bracket over the marked screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the arrows in the center are pointing up.

5. Screw the 2 knobs into the back of the soundbar until they are fully tightened.

6. Connect the power and HDMI cables to the back of the soundbar.
   Note: If you’re connecting the cables to the TV at this time, be sure to plug the HDMI cable into the HDMI ARC or eARC port on your TV.

7. Slide the soundbar down so the knobs fit into the slots on the wall bracket. Make sure the touch controls are facing up, and the soundbar is fully seated.

Wall mounting information

Wall mounting information|
---|---
Wall Material| Pre Drill| Use Wall Anchors| Use Screws
Wood Stud| 1/8″ / 3 mm bit| No| 2
Drywall (no stud)| 5/16″ / 8 mm bit| Yes| 6
Plaster| 5/16″ / 8 mm bit| No, requires toggle bolt (not included)| 2-6
Concrete or Brick| 5/16″ / 8 mm bit| Yes| 2-6
Specifications| | |

Specifications

Specifications subject to change without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>