SUNCO A19 LED Emergency Light Installation Guide
- June 6, 2024
- SUNCO
Table of Contents
A19
Emergency Light
Install Guide and Manual
OPTIONAL USE IN EMERGENCY
STANDARD USE
Ideal for general purpose light bulb use in a 120V light fixture that accepts an E26 base light bulb.
- If bulb plugged into suitable light fixture (and switch was on), A21 Emergency LED Bulb will illuminate during a power outage.
PORTABLE USE
- WITH INCLUDED CAP WITH HOOK:
- Remove the light bulb from your light fixture.
- Screw the light bulb into the provided cap with hook.
- Use the hook to hang the bulb where you need it such as camping, closets etc.
- AS A FLASHLIGHT REPLACEMENT WITH FINGER:
- Remove the light bulb from your light fixture.
- Touch your fingertip to the base of the bulb. The light turns on.
- Release your finger to turn the bulb off.
- AS A FLASHLIGHT REPLACEMENT WITH WET TISSUE OR WET CLOTH
- Hold a wet tissue or wet cloth to the base of the bulb.The light turns on.
- Release the tissue or cloth to turn the bulb off.
- Dry the base completely before using in a light fixture.
CAUTIONS
IMPORTANT
- The A21 Emergency LED Light bulb lasts for up to 4 hours on a fully charged battery.
- It takes 5 hours to fully charge the A21 Emergency LED Light Bulb.
- After powering the A21 Emergency LED Bulb with a wet tissue or wet cloth, thoroughly dry the light bulb base before screwing it into your light fixture again.
- Remember to recharge the bulb periodically.
WARNINGS
As provided by certification companies and others.
SPECIFICATIONS
| Voltage | 120/277V |
|---|---|
| Wattage | 11W |
| Current | 0.9 |
| Lumens | 1100 |
| Suitable for Damp Locations Ignress | Yes |
EMERGENCY SITUATION
| Battery | 1500mAh |
|---|---|
| Volts | 3.7V |
| Lumens | 150 |
CHARGING THE BULB
- Screw in the bulb into a 120V light fixture that accepts an E26 base.
- Turn on the light switch.
- After 5 hours, the light bulb will be fully charged and ready for emergency use.
- Leave the bulb powered on, if you prefer to use this bulb in a standard way.
- Unscrew and store for emergency use where you need it, if you prefer portable use.
TESTING THE BULB
STANDARD USE
- Screw in the Bulb into a 120V light fixture that accepts an E26 base.
- Turn on the light switch.
- Once the bulb is charged after 5 hours, cut off the main/circuit breaker.
- The A21 Emergency LED Bulb should turn on.
PORTABLE USE
- Remove the light bulb from your light fixture.
- Touch your fingertip to the base of the bulb.
- The A21 Emergency LED Bulb should turn on.
CAUTIONS
IMPORTANT
- The A21 Emergency LED Light bulb lasts for up to 4 hours on a fully charged battery.
- It takes 5 hours to fully charge the A21 Emergency LED Light Bulb.
- After powering the A21 Emergency LED Bulb with a wet tissue or wet cloth, thoroughly dry the light bulb base before screwing it into your light fixture again.
- Remember to recharge the bulb periodically.
WARNINGS
As provided by certification companies and others.
SPECIFICATIONS
| Voltage | 120/277V |
|---|---|
| Wattage | 11W |
| Current | 0.9 |
| Lumens | 1100 |
| Suitable for Damp Locations Ingress | Yes |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>