ZOSKVEE N29 Smart Watch User Manual

ZOSKVEE N29 Smart Watch

You will find the user guide and user manual under the part Product guides and documents on the Amazon product page if you need a detailed operation guide. Please feel free to contact us via Amazon orders if you have any product questions.

How to Operate

How to Power on Long press the side button to power on. Please fully charge the watch before first use.

How to Charge: Please operate strictly as shown as the below pictures:

1. 1. Please align the charging cable with the contacts on the back of the watch.

2. Please plug it into a USB port on the computer, charging base, or power bank to charge (The USB adapter is not included in the package)

Operation Instructions:

Gesture Instructions:

Interface Instructions: Swipe the screen to enter different interfaces, the various interfaces show as below:

Download the App: The InxFit app can be downloaded and installed in the App Store on iOS and Google Play on Android, or by:

• Scan the QR code below.
  

• InxFit app is compatible with:
  

Note: It only works with smartphones. It cannot work with an iPad, tablet, or personal computer.

How to Connect

Note: The app InxFit requires you to turn on the Bluetooth and allow InxFit to access the GPS on your mobile phone during the connection.
For iOS users, when the connection fails, please forget this device on your phone’s Bluetooth list and reconnect the watch.

• Method 1: Tap ‘+’ in the upper right corner of the app homepage and select ‘Add Device’ to search. Find the device corresponding to your watch in the search list, and tap to bind it.
  

• Method 2: Tap ‘+’ in the upper right corner of the app homepage and select ‘scan’, when it is first turned on. Scan the QR code displayed on the device. If you accidentally log out, please find it on the watch (Setting → About).
  

Data Synchronization:
The InxFit app will be synchronized with the watch automatically after being connected for the first time; While the watch remains connected with your phone, you can click app tab on the homepage of the InxFit app to enter Details, and swipe down from the top to synchronize again.

Wear and Replace

• Wearing method: In order to get more accurate measurements, please wear the watch one finger away from the wrist bone, and adjust the strap to a comfortable tightness.
  
  Note: Wearing too loosely or too tightly may affect the accuracy of heart rate or blood oxygen monitor.

• Replace the strap: Please choose a strap with a width of 22mm.

  • Slide the snap lock on the strap and remove the strap.
  • Align the new strap with the body and buckle it into the strap.
  • Gently pull the strap to ensure that the strap is buckled in.

Main Function Introduction

1. 1.  **Watch Faces:** Setting on watch: Long press the screen, the watch faces will appear after vibration, or you can press the side button → slide down and tap ‘Setting’ → ‘Dial Setting’ → slide horizontally to choose the watch face you like. Setting in the app: login your account in the app → tap ‘Device’ → tap ‘Watch faces’ → Choose the watch face you like. Also, you can tap ‘Mine’ to customize the watch face. Different watch faces can display different information such as time, heart rate, steps, calories, and so on.

2. Message Notification:
   The watch can display text messages, calls, a **nd application notifications, such as Facebook, WhatsApp, Twitter, etc.
   Note:** This function needs to connect to the app and tap ‘Message Notification’. Left swipe the screen to delete the received messages.

3. Heart Rate Monitor:

Tap the heart rate icon to monitor your HR. You can view the current heart rate, max HR, min HR, resting rate, and heart rate curve on the watch. Tap ‘Device’ → tap ‘Heart rate rating’ in the app to open the real-time heart rate monitor function. More detailed data can be viewed in the app.

1. 1.  **Blood Oxygen Monitor:** Tap the icon to enter the blood oxygen monitor mode. Keep your arm steady for 15 seconds and view the current blood oxygen level. You can view more detailed information in the app.

2. Today’s Date: ****

Swipe left on the watch face interface to view daily data like steps/calories/distance/exercise duration. Tap the ‘Today’s data’ icon on the screen to view more detailed data.

1. 1.  **Sleep Monitor:** ****

The watch can track and record users’ sleep status when they wear the watch correctly during sleep. Users can better understand their sleep status based on the four status data including deep sleep / light sleep / rapid eye movement / awake. More detailed data can be viewed in the app.

1. 1.  **Breathe Training:**

Users can set the frequency and duration of breathing training, and adjust their heart rate abnormalities through breathing training, thereby decompressing and relaxing.

1. 1.  **Sports Modes:** The watch supports 10 sports modes, including Indoor walking / Outdoor walking / Indoor running / Outdoor running / Cycling / Spinning / Yoga / Rowing machine /Elliptical machine / Other sports, users can set different fitness targets according to their physical conditions.

2. Sport Record: ****

It shows each exercise data such as calories, steps, time duration, distance, average HR, HR curve, and so on (Tap ‘Sport record’ → tap ‘Sport figure’ icon to view). Users can better know their exercise status and heart rate changes through data comparison. More detailed data can be viewed in the app.

1. 1.  **Music Control:**

After connecting to the app, users can control the mobile music player with the watch like adjust volume / previous song / next song/pause/play.
Users need to open the phone player first before using the function to control music.

1. 1.  **Weather Forecast:** The weather function is turned off by default and needs to be turned on in the app under connection. It will be displayed on the watch only when the app accesses the phone’s location and the GPS must be on.

2. Do Not Disturb Mode: ****

Turning on the Do Not Disturb mode can avoid being disturbed by the vibration and sound reminders of the watch notification during the sleep period or other undesired time periods, but the notification message is still received so that you will not miss any information while enjoying the quiet time.
Note: Turn on Do Not Disturb mode, the alarm clock keeps on.

1. 1.  **More Functions:**

The watch also has functions such as Alarm, Timer, Stopwatch, Raise to Wake, Brightness, and Sedentary Reminder.

Product Specifications

Charging Mode:

| Magnetic charge
Operating Temperature:| ****

-20℃-45℃

| ****

Watch Size:

| L251mm*W36.7mm

*T12.4mm

iOS:| iOS 10.0+
Android:| Android 6.0+

Note: The watch can be worn during a bath or shower, provided that the water temperature is below 40℃.

Cleaning and Maintenance

Make sure your wrist is dry before wearing the watch. After washing or sweating, dry it thoroughly before putting it on your wrist.

1. Please wipe gently with a flannel dipped in a neutral mild detergent.
2. Do not use special detergents to clean the equipment, you can use soap-free detergents.
3. It is recommended to use alcohol to scrub for stains that are not easy to remove.
4. Please wait for the device to dry completely after cleaning.

Note: When the device is charging, even a small amount of sweat or water vapor may cause corrosion of the charging terminal, resulting in obstructed data transmission, thereby affecting charging.

Safety Tips

1. The equipment, accessories, heart rate monitoring, blood oxygen detection, and related data are only used for exercise monitoring, not for medical purposes.
2. Do not expose the watch to a heat source or high-temperature environment, it may damage the device.

Frequently Asked Questions:

1. How to restart or restore the factory settings?
   Press the side button on the watch → Swipe the screen and tap Setting → System Menu → Power off / Restart / Factory settings.

2. How to connect the watch with your phone?
   Download the app InxFit, There are 3 ways to connect the watch after you register an account and log in. (Make sure the Bluetooth of your phone is on)

   • Method 1: Open the app InxFit → Tap ‘Device’ → Tap ‘Bind device’ → Tap‘N29’ → Tap ‘√’ on the watch → Tap ‘Complete’ on the app page.
   • Method 2: Open the app InxFit → Tap ‘+’ icon on the upper right corner → Tap ‘Add device’ → Tap ‘N29’ → Tap ‘√’ on the watch screen → Tap ‘Complete’ on the app page.
   • Method 3: Open the app InxFit → Tap ‘+’ icon on the upper right corner → Tap ‘Scan code’ → Tap scan the QR code on the watch screen (tap ‘Setting’ → Tap ‘About’ → swipe down to find the QR code) → Tap ‘√’ on the watch screen → Tap ‘Complete’ on the app page.

3. How to reconnect the watch after failing to pair it?
   

   • Step 1: Tap ‘Settings’ on your phone → Tap ‘Bluetooth’ → Tap ‘N29’ and ‘Forget This Device.
   • Step 2: Press the side button on the watch → Tap‘Setting’ → Tap ‘System Menu’ → Tap ‘Factory setting’ → Repeat the connection steps above.

4. How to switch languages?

   • Set watch languages: Under connection, Tap the ‘Device’ interface in the app → Tap ‘More’ → Tap ‘Device language’, choose the language you want → The watch will display the language.
   • Set app languages: Tap ‘Mine’ in the app → Tap ‘Settings’ → Tap ‘language settings’, choose the language you want → The app will display the language.

5. How to set the time and time format on the watch?

   • Set time on the watch: Under connection, swipe down on the homepage in the app to sync data, the time will sync with your phone. Please disconnect and reconnect the watch if there is still a problem with time synchronization.
   • Set time format: Under connection, Tap the ‘Device’ interface in the app → Tap ‘More’ → Tap ‘Time system’ → Choose to Follow system / 12-hour clock / 24-hour clock.

6. How to get message notifications on the watch?
   If you allow all permissions when you install the app InxFit and connect the watch, just tap ‘Device’ in the app → Tap ‘Message Notification’ → Open the app notification you want → Tap ‘√’ icon on the upper right corner to save the settings. If you don’t allow all permissions when you install the app InxFit and connect the watch, please follow the tips to set message notifications under connection.

7. For iOS phones:
   Step 1: Tap ‘Settings’ on your phone → Tap ‘Bluetooth’ → Tap the ‘!’ icon behind ‘N29’ to open Share System Notifications
   Step 2: Tap ‘Notifications’ on your phone Settings → Tap ‘Show Previews’ → Choose ‘Always.
   Step 3: Tap ‘Device’ in the app → Tap ‘Notice’ → Open the app notification you want → Tap ‘√’ icon on the upper right corner to save the settings.

8. For Android phones:
   Step 1: Tap ‘Device’ in the app → Tap ‘Message Notifi-cation’ → Tap ‘InxFit’ to allow it to receive notifications.
   Step 2: Tap ‘Message Notification’ → Open the app notification you want → Tap ‘√’ icon on the upper right corner to save the settings.
   Note: The watch will display the message notification content only if the phone is set to display the message notification content. The watch cannot answer calls and reply to messages. You need to reset the message notification after the watch reconnects to the app.

9. How to get more accurate measurements?
   Under connection, input your gender, age, height, weight, and other personal information accurately in the app. Wear the watch correctly on your wrist. The watch should be close to the skin. Then place your arm flat on the table and keep it still for a few seconds when you measure the heart rate and blood oxygen. In addition, please take the average of multiple measurements in order to ensure the accuracy of the measurement results.
   Note: This watch is not intended for medical use, all measurements are for general fitness and wellness purposes. Email: n29@fitwatch4u.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>