ZOSKVEE KW1 Kids Smart Watch Instruction Manual

ZOSKVEE KW1 Kids Smart Watch

Product introduction

Charging

1. Put the watch onto the charging connector and make the charging contact piece on the back of the watch completely fit the metal contact on the charging connector. (The full power needs more than 2h charging.)
2. Connect the charging cable to a standard charger purchased through a regular channel. The output voltage should be 5V and the output current should be 1A.

If the watch cannot be switched on after a long time of storage, please wipe off sweat or water residue on the charging cable after the next usage.
Note: (If the watch is not often used, please charge the watch once a month.)

Wear

Wear the watch about a finger away from the wrist bone, and adjust the tightness of the wristband to a comfortable position.

Tip: Wearing too loosely may affect the data collected by the heart rate sensor with errors.

Join binding

1. Search and download “GloryFit” from the App Store or Google Play.
2. Use your mobile phone to scan the QR code on the watch screen (Settings – APP QR code) and then install the APP.
   • You can also scan the QR code on the right to download and install GloryFit in the App Market.

Conventional binding : After installing the APP, open GloryFit, login, and select KW1 on the device page (add a device or scan the QR code of the watch) for connection.

Tips:

1. During the pairing process, please ensure that the Bluetooth of the mobile phone is enabled to ensure a smooth connection between the watch and the mobile phone.
2. If the device cannot be found during adding the device or cannot be connected during use, set System Settings to Restore Factory defaults on the watch operation window, and then add the device again.
3. If you can’t find the watch, exit and re-open the APP.
4. The connection status of the watch is shown as follows:

Interface Introduction

Function introduction

Multiple sports modes

• Running, walking, cycling, dancing, badminton, basketball, soccer, etc.
• In running and walking mode, you can view exercise data (heart rate, pace, exercise duration, calories, steps, and distance).

Heart rate

• Running, walking, cycling, dancing, badminton, basketball, soccer, etc.
• In running and walking mode, you can view exercise data (heart rate, pace, exercise duration, calories, steps, and distance).

Blood oxygen

• The red light blinks on the back represent the start of blood oxygen measurement, which takes 30-60 to complete.

Games

• There are games built-in, and children can score points through the game.

Calculator

• A complete suggested algorithm calculation.

Status

• Keep detailed records of daily steps, distance, calories, etc.

Sleep

• Record sleep time and sleep state in detail (check on APP).
• Message: Message alert, sync the notification push on the phone. (Note: Display APP can support social software messages)
• Settings: QR code, shutdown, restore factory Settings.

Basic Parameters

Q&A

1. The Bluetooth connection fails
   • Please confirm if the mobile phone system meets Android 6.0 or above, or iOS 9.0 or above.
   • Please confirm if the device is connected to other mobile phones.
   • Please confirm if the Bluetooth of the mobile phone can be used normally after turning it on. It is recommended to close all programs and restart the Bluetooth before connecting.
2. Messages are not pushed
   • Please enable the Bluetooth function of the mobile phone and connect the App to a watch.
   • Please authorize this App to keep running in the background of your phone.
   • Please turn on the corresponding app notification switch on the device page of the App.
   • Please go to the system Settings to enable the permission for the App message to pop up in the notification bar, if the app notification you need cannot appear in the notification bar of your phone.
   • Please check if the watch is enabled in DND mode.
   • If the above operations cannot work, please check whether the watch is enabled in Do Not Disturb mode.
3. How to synchronize data?
   • Automatic synchronization: When the device is connected to the APP, data will be automatically synchronized;
   • Manual synchronization: After the device is connected to the APP, manual synchronization can be performed in the drop-down data list on the home page and data interface;
   • If the data cannot be synchronized, please turn off and turn on the phone Bluetooth again or restart the phone;

Note: You can find the FAQs to help you solve some problems in the APP .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>