BEHIYA BE-21S1-V004 Vanity Lighting Fixtures Instruction Manual
- June 6, 2024
- BEHIYA
Table of Contents
BEHIYA BE-21S1-V004 Vanity Lighting Fixtures
Lights Vanity Light / Item No : BE-21S1-V004
CAUTION : Shut off power at the fuse box or circuit breaker panel before
beginning installation. If necessary remove the old fixture and mounting
hardware.
REMINDER : Check & Identify all parts as package listed before installation. Take Care not to lose any small parts necessary for installation.
Parts Indication
Package List
- Hanging Plate X 1
- Plug X 3 ( 1 for Spare )
- Screw X 3 ( 1 for Spare )
- Wood Screw X 3 ( 1 for Spare ) E : Connector X 4 ( 1 for Spare )
- Main Light Fixture X 1
- Body Screw X 5 ( 1 for Spare ) H : Lampshade X 4 ( 1 for Spare )
- Socket Screw X 10 ( 1 for Spare ) Assembly Instruction X 1
- 1. Turn off the power at the main circuit breaker to avoid electrical shock.
- 2. Secure the Hanging Plate ( A ) to the wall junction box with provided Screws ( C ) & wall with provided Plug ( B ) + Wood Screws ( D ).
- Connect the power cable -black to black /white to white /ground to ground by using provided Connectors ( E ).
- Push all excess wire into the junction box., then fix the whole Light Fixture ( F ) to the hanging plate with Body Screws ( G ). Tighten until snug.
- Twist the bulbs into the socket.
- Finally, install the Lampshade ( H ) into the lampshade holder, tighten with the Socket Screws ( I ) ( 3 for each socket ). Then turn the Light on and enjoy the Light !!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>