Rowenta DG8624U1 Perfect Steam Pro Instructions

Rowenta DG8624U1 Perfect Steam Pro

Groupe SEB USA – 2121 Eden Road
Millville, NJ 08332, USA – Tel: 1-800-769-3682
Groupe SEB Canada Inc, 345 Passmore Avenue Scarborough, Ontario, M1V 3N8
Groupe SEB Mexico S.A de C.VCalle Boulevard Miguel de Cervantes Ampliacion Granada C.P 11520 Ciudad
de Mexico – Tel: 01 (800) 112 83 25
www.rowenta.com

according to model

PREPARATION

USE

AUTO-OFF

MAINTENANCE

It’s recommended to rinse your boiler twice a year to extend product life.

WELCOME TO THE ROWENTA WORLD!
Congratulations on choosing the ROWENTA PERFECT STEAM PRO steam station to care for your garments!
Founded in Germany in 1884, Rowenta has a long history of innovation. We create high-performance household appliances with graceful designs that can be found all around the world.

The ROWENTA PERFECT STEAM PRO steam station enables you to get professional results at home in less time. Its powerful steam output ensures perfect steam penetration deeply into fabrics, while the stainless steel soleplate dries them instantly in just one pass leaving impeccable results. Unlimited ironing is provided with the permanent refill water tank, and the exclusive scale collector guarantees long-lasting performance . With the ROWENTA PERFECT STEAM PRO steam station, you do not have to be an expert anymore to get professional results !

OUR ADVICE:
To enjoy and discover how to use your PERFECT STEAM PRO steam station, we advise you to read through the product instructions before first use.

IMPORTANT SAFETY INSTRUCTIONS

When using your appliance, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING

1. Use appliance only for its in-tended use.
2. To protect against a risk of elec-tric shock, do not immerse the appliance in water or other li-quids.
3. The appliance should always be turned off before plugging or unplugging from electrical outlet. Never pull the cord to disconnect from outlet, ins-tead grasp plug and pull to dis-connect.
4. Do not let the power cord touch hot surfaces. Let the steam sta-tion cool completely before put-ting it away. Wind up the power cord and attach it with the Vel-cro.
5. Always disconnect appliance from electrical outlet when fil-ling or emptying water and when not in use.
6. Do not operate appliance with a damaged cord or if appliance has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the appliance. Contact Rowenta Consumer Services or take it to a qualified service person for examination and repair. Incorrect reassembly can cause a risk of electric shock when the ap-pliance is used after reassembly.
7. Close supervision is required for any appliance used by or near children. Do not leave the iron unattended while the appliance is connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a Pro Precision steam sta-tion upside down. There may be hot water in the reservoir.
9. This is a 1800 watts appliance. To avoid a circuit overload, do not operate a Pro Precision steam station on the same circuit with another high wattage appliance.
10. If an extension cord is absolu-tely necessary, a cord with 15A or greater shall be used. A cord rated for less amperage can re-sult in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
    Any commercial use, inappro-priate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
    For your safety, this appliance conforms to the applicable standards and regulations (Low Voltage, Elec-tomagnetic Compatibility, Environ-mental Directives, as applicable…). Your Pro Precision steam station is an electrical appliance: it must be used in normal conditions of use. It is fitted with 2 safety systems:
    – A pressure release valve which, in the event of a malfunction, releases any excess steam.
    – A thermal fuse to prevent the appliance from overheating. Always plug your Pro Precision steam station into:
    – An electrical installation with voltage 120V. Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate your guarantee.
    – If the appliance is fitted with Polarized plug (one blade is wider than the other): to reduce the risk of electric shock, the appliance is fitted with polarized plug. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
    – The appliance must not be left unattended while it is connected to the outlet.
    – The plug must be removed from the outlet before the water reservoir is filled with water.
    – The appliance must be used and rested on a stable surface.
    – When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable.
    – The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
    – If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
    – This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
    – Children should be supervised to ensure that they do not play with the appliance.
    – Do not direct steam at people, animals or iron clothes while they are being worn.
    – “Calc Away-System”: Always wait before rinsing the collector until the steam station has cooled down and has been unplugged for at least 2 hours before unscrewing the collector.
    If you lose or damage the scale collector, have it replaced by calling Rowenta Consumer Services.
    – Never attempt to unscrew the scale collector while the appliance is in use. The strong steam pressure could results in burns. Only unscrew the collector when the appliance is cold (2 hours) or there is no more pressure in the boiler.

SAVE THESE INSTRUCTIONS

DESCRIPTION

1. Iron handle
2. Steam trigger
3. Iron temperature control dial
4. Base unit
5. Precision tip
6. Safety lock (to hold the iron onto the base unit)*
7. R emovable 1.1L / 37fl oz water tank
8. Tank filling shutter
9. “Calc away system” scale collector or “boiler rinse” cap cover *
10. Iron rest
11. Iron temperature control light
12. Steam cord
13. Steam cord storage clip
14. “Calc Away System” scale collector*
    a: ON / OFF Button
    b: ECO button
    c: MAX button
    d: Water tank OK button
    e: Calc away OK button

PREPARATION

Safety lock (according to model)

• Your steam station is equipped with a safety lock that holds the iron on to the base unit in order to facilitate transport and storage:
• Pull up – fig. 1.
• Push down – fig. 2.
  The safety lock allows you to carry your steam station by the iron handle:-
  place the iron on the iron rest of the steam station and lock it into place (you will hear an audible “click” sound) – fig. 1.
  – Hold the iron by its handle in order to transport your steam station – fig. •3

Water recommendations What water should I use?

• This appliance has been designed to be used with untreated tap water. If your water is very hard, (hardness above 30°F, or 17°dH or 21°e) use a mixture of 50%tap water and 50% distilled water. In some seaside regions, salt content might be high. In that case, use only water bottle, with low mineral lever
• They are different type of softened water, and most of them can be used in your steam gen. However, some of
  them, especially the one with chimical components, like salt, might occur white or brown runs. If you face this type of issue., we recommand you to use non-treated tap water or bottled water. You should not use water from domestic appliances, with additives (starch, perfume, etc.), rain water, boiled, filtered, bottled water. Do not use pure distilled nor pure demineralised water. Such water might affect steam attributes and at high temperature generate steam chamber sediment, liable to stain your linen and provoque early appliance aging.

Preparing your steam station

• Place the steam station on a flat, stable, horizontal and heat-resistant surface.
• Lift the removable water tank (located at the front of the steam station) pressing on the lock screw located on the tank handle – fig. 4.
• Fill the tank with untreated tap water, taking care not to exceed the maximum level – fig. 5.
• Slide the tank back into its housing until it “clicks” into place.
• Unwind the electrical power cord it completely and remove the steam cord from its housing- fig.6.
• Plug your steam station into a 120 volt electric outlet – fig.7.

**USE

**

Switching on your steam station

• Press on the on / off button – fig. 8, The MAX button begins flashing.
• When starting, and regularly while it is being used, your steam station’s electric pump injects water into the boiler. It makes a noise but this is quite normal.
• The steam station and the iron are ready for use when the MAX button light is on and the iron light goes out.
  The first time the appliance is used, there may be some fumes and a slight smell this is not harmful and will quickly disappear.

Using your steam station

• Place the iron’s temperature control – fig. 9 to the type of fabric to be ironed (see table below).
• The iron temperature control light turns on. Important: whenever you start using your iron and whenever you reduce the temperature during use, the iron is ready for use when its indicator light goes out and when the green light located on the control panel comes on and remains on.
• During use, when you increase the temperature of the iron, you can start ironing immediately.

Type of fabric| SeTTing

TemperaTure

---|---
SynTheTicS

(Polyester, Acetate, Acrylic, Polyamide)

| •
Silk / Wool| ••
coTTon / linen| •••

ECO Mode: Your steam station has an ECO mode function which uses less power whilst still guaranteeing a sufficient steam output for you to iron your garments properly.
In order to use this function, once the thermostat of your iron has been correctly set (see table above), press on the ECO button located on the control panel.
The ECO mode can be used on all types of fabrics, nevertheless, for very thick or very creased fabrics we recommend that you deactivate ECO mode (by pressing the MAX button) to guarantee the best results.

• During ironing the iron indicator light switches on and off according to heating requirements but this has no effect on use.
• To obtain steam, press on the steam trigger beneath the iron handle and keep it pressed – fig. 11. The steam will stop when you release the trigger.
• Always spray starch on the reverse side of the fabric to be ironed. Recommendations: To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function for a few minutes, press the steam trigger several times in a row – fig.11, holding the iron away from your clothes. This will enable any cold water to be removed from the steam circuit.
  Iron temperature control setting: Your iron is quick to heat up so start with fabrics to be ironed at a low temperature and finish with those which need higher temperatures. Mixed fibre fabrics: set the ironing temperature to the setting for the most delicate fabric. For delicate fabrics (•), press the steam trigger (under the handle of the iron) intermittently to avoid any water droplets appearing with the steam. If you set your thermostat to “min”, the iron will not become hot.
  When taking a break from ironing, never place the iron on a metal rest plate, which could damage the iron rest plate of the unit. It is equipped with non- slip pads and has been designed to withstand high temperatures.

Vertical steam ironing

• Set the temperature of the iron to the max position.
• Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.
• Press repeatedly on the steam – fig.11 steam trigger (beneath the iron handle) moving the iron from top to bottom – fig. 12. Examples of how to use the vertical steaming function:
• Removing creases directly on hangers from delicate fabrics that you do not want to bring into contact with the hot iron.
• Refreshing a shirt or a suit just before putting it on.
  As steam is very hot: never attempt to remove creases from a garment while it is being worn, always hang garments on a coat hanger. For fabrics other than linen or cotton, hold the iron a few centimetres from the garment to avoid burning the fabric.

Dry ironing
Do not press the steam trigger.

Fill the water tank again

• When there is no more steam and the “Water tank empty” light flashes – fig. 13: the water tank is empty.
• Press the ON / OFF button. Unplug your product.
• Remove the water tank using the handle (on the front of the steam station) – fig. 14 and fill it – fig. 5 do not fill above the Max. level. If this occurs, remove the excess water.
• Push the water tank into position until it “click” into place. Plug your product. Press the ON / OFF button located on the control panel. Press the Restart button located on the control panel. The red light turns off.
• The steam station and the iron are ready for use when the MAX button light is on and the iron temperature control light goes out.

Storing the steam station

• Turn off the appliance and unplug it. Place the iron on the iron rest on the steam station. Lock the iron onto the base unit by pressing it until you hear an audible “click”, so your iron is secure – fig 1. Fold the steam cord in two and place it in its housing.
• Leave the steam station to cool for at least one hour before putting it away if it is to be stored in a cupboard or confined space. You can then store your steam station safely.

«AUTO-OFF» System

• For your safety, the steam generator is fitted with an «AUTO-OFF» monitoring system, which is activated automatically after approximately 8 minutes without use.

• Only the «ON-OFF» button flashes to indicate that the appliance is on standby.

• To reactivate the steam generator:
  – Press the «ON-OFF» button.
  – Wait for the «MAX» button light to stop flashing before starting your ironing again.

• For your safety, after approximately 30 minutes of non-use, the «AUTO-OFF» the system switches off your steam generator. To start your ironing again, press the «ON-OFF» button.

MAINTENANCE AND CLEANING

Do not use any cleaning or descaling products for cleaning the soleplate or the base-unit. Never hold the iron or the base unit under the tap.
Cleaning the station

• The iron soleplate: Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The base unit: Clean the plastic parts of the appliance occasionally with a soft cloth.

Easy descaling of your steam station
Do not use any descaling substances (vinegar, industrial descaling products, etc.) when rinsing the scale collector: they could damage it.
Before emptying your steam station, it must always be left to cool for 2 hours to avoid any risks of scalding.
The water in the appliance may still be hot and cause burns even after 2 hours of cooling down. Handle the appliance with care when then collector is removed,
particularly when you are emptying it.

• To extend the life of your steam station and avoid scale on your ironing, your steam station is equipped with a built-in scale collector. This collector, located in the boiler, automatically removes the scale that forms inside.

Operation:

• An orange “Calc Away OK button” light located
  – fig. 15 on the control panel starts flashing to tell you that the scale collector needs rinsing.

• Once the steam station has cooled completely, remove the scale collector –

IMPORTANT! This operation must not be carried out unless the steam station has been unplugged for at least two hours and has cooled down completely. To carry out this operation, the steam station must be close to a sink as water may come out of the tank when it is opened.

• Unscrew the scale collector and remove it from the housing; it contains the scale that has built up in the tank – fig. 17.

• To clean the collector properly, just rinse it under running water to remove the scale it contains – fig. 18.

• Put the collector back into its housing and screw it in completely to keep it watertight – fig. 19.
  The next time you use your iron, press the “Restart OK button“ button on the control panel to turn off the orange “Calc Away OK Button” light. Twice a year:
  In addition to this regular maintenance procedure, we recommend that you rinse the boiler completely once every 6 months, or once every 25 times you use your steam station.

• Make sure that the steam station has been unplugged and allowed to cool for at least 2 hours.

• Place the steam station on the edge of your sink and the iron to one side, on its heel.

• unscrew the scale collector – fig. 16-17.

• Hold your steam station at an angle and use a jug to fill the boiler with 1/4 litre of tap water.- fig. 24.

• Shake the base unit for a few seconds then empty it completely into the sink.-fig. 25-26.

• Fit the collector back in its housing and screw it on tightly to ensure it is watertight but do not overtighten it -fig. 19.
  The steam station does not work without the scale collector / boiler rinse cap (according to model).
  Regular descaling of your steam station helps to maintain its steam performance over time

USA: If this troubleshooting does not resolve the issue, before consulting the retailer or returning the product, please telephone Rowenta Consumer Services at 1-800-769- 3682. Further hints ans tips are obtainable from our homepage www.rowentausa.com
Canada: If you are unable to trace the cause of the fault, contact an official Rowenta Customer Service Center. The addresses are shown in the enclosed service center address list. Further hints and tips are obtainable from our homepage: www.rowenta.ca
Mexico: If you are unable to trace the cause of the fault, contact an official Rowenta Customer Service Center. The addresses are shown in the enclosed service center address list. Further hints and tips are obtainable from our homepage: http://www.rowenta.com.mx

IS THERE A PROBLEM?

The steam station does not switch on or the iron indicator and ON/OFF indicator do not switch on.| The appliance is not switched on.| Check that your appliance is correctly plugged in and press the illuminated on/ off button.
Water runs through the holes in the soleplate.| You use steam too frequently when your iron is not hot enough.| Wait for the thermostat light to go out before activating the steam trigger.
Adjust the frequency of use of the steam trigger to match the position of the

thermostat (see § 6).

Water has condensed in the pipes because you are using steam for the first time or you have not used it for some time. you have not used it for some time.| Press on the steam trigger away from your ironing board until the iron produces steam.
Water streaks appear on the linen.| When taking a break from ironing, if your ironing board cover is soaked with water it is not suited to the power of a steam station.| Check that your ironing board is suitable. A mesh type ironing board must be used avoid condensation.
White streaks come through the holes in the soleplate.| Your boiler has a build-up of scale because it has not been rinsed out regularly.| –  Rinse the collector when the “Calc Away OK button” indicator flashes.

–  Rinse the boiler twice a year.

If your water is very hard, rinse it more often.

Brown streaks come through the holes in the soleplate and stain the

linen.

| You are using chemical descaling agents or additives in the water for

ironing.

| Never add this type of product to the water tank (see § 2).

Contact an Approved Service Centre.

too high

a temperature.

| See our recommendations regarding

temperature control setting.

Your linen is not rinsed sufficiently or you have ironed a new garment before washing it.| Ensure linen is rinsed thoroughly to remove any soap deposits or chemicals on new garments which may be sucked up by the iron.
You are using starch.| Aways spray starch on the reverse side of the fabric to be ironed.
There is no steam or there is little steam.| The water tank is empty (red light flashing).| Fill the water tank and press the “OK” button on the control panel.
The soleplate temperature is set to the maximum.| The station is working but steam is very hot and dry. As a result, it is less visible.
The water tank is not correctly fitted into its housing.| Push it into position until it «clicks» into place.
steam comes out from around the collector.| collector is not tight enough.| Tighten the collector after having let the appliance cool for 2 hours.
The seal of the collector is damaged.| Contact an Approved Service Centre.
The station is faulty.| Stop using the station and contact an Approved Service Centre.
The red “water tank empty” light flashes.| You did not press the “OK” button.| Press the “OK” button on the control panel until the indicator goes out.
Steam or water escapes under the appliance.| The station is faulty.| Stop using the station and contact an Approved Service Centre.
The orange“Calc Away OK button” light is lighting| You did not press the “OK” button.| Press the “OK” button on the control panel until the indicator goes out.

ROWENTA INTERNATIONAL LIMITED GUARANTEE

www.rowenta.com

This product is repairable by ROWENTA, during and after the guarantee period.
Accessories, consumables and end-user replaceable parts can be purchased, if locally available, as Described on the ROWENTA internet site www.rowenta.com

The Guarantee
ROWENTA guarantees this product against any manufacturing defect in materials or workmanship during the guarantee period within those countries*** as stated in the country list on the last page of the user manual, starting from the initial date of purchase.
The international manufacturer’s guarantee covers all costs related to restoring the proven defective product so that it conforms to its original specifications, through the repair or replacement of any defective part and the necessary labor. At ROWENTA’s choice, a replacement product may be provided instead of repairing a defective product. ROWENTA’s sole obligation and your exclusive resolution under this guarantee are limited to such repair or replacement.

Conditions & Exclusions
ROWENTA shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase. The product can be taken directly in person or must be adequately packaged and returned, by recorded delivery (or equivalent method of postage), to a ROWENTA authorized service centre. Full address details for each country’s authorized service centers are listed on ROWENTA website (www.rowenta.com) or by calling the appropriate consumer Service centre set out in the attached Country List.
This guarantee applies only for products purchased and used for domestic purposes and will not cover any damage which could occur as a result of misuse, negligence, failure to follow ROWENTA instructions, or a modification or unauthorized repair of the product, faulty packaging by the owner or mishandling by any carrier. It also does not cover normal wear and tear, maintenance or replacement of consumable parts, or the following:

• using the wrong type of water or consumable
• damages or bad results specifically due to wrong voltage or frequency as stamped on the product ID or specification
• scaling (any de-scaling must be carried out according to the instructions for use)
• accidents including fire, flood, thunderbolt etc
• mechanical damages, overloading
• ingress of water, dust or insects into the product
• damage to any glass or porcelain ware in the product
• professional or commercial use

Consumer Statutory Rights
This international ROWENTA guarantee does not affect the Statutory Rights a consumer may have or those rights that cannot be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This guarantee gives a consumer specific legal rights, and the consumer may also have other legal rights which vary from State to State or Country to Country. The consumer may assert any such rights at his sole discretion.
*** Where a product purchased in one listed country and then used in another listed country, the international ROWENTA guarantee duration is the one in the country of usage, even if the product was purchased in a listed country with different guarantee duration. The repair process may require a longer time if the product is not locally sold by ROWENTA. If the product is not repairable in the new country, the international ROWENTA guarantee is limited to a replacement by a similar or alternative product at similar cost, where possible.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>