VIVIANUS WORX 20V Cordless Grass Strimmer Edger Instruction Manual

VIVIANUS WORX 20V Cordless Grass Strimmer Edger

DETAILED DESCRIPTION

1. Battery: 21V 2.0A battery. Battery life varies depending on the tool
2. Safety switch: meets safety standards to prevent accidental opening.
3. Power display: shows remaining power.
4. Auxiliary handle: auxiliary handle for easier use
5. Sub-handle adjustment: 180° rotation to adjust height and angle for ease of use
6. Telescopic adjustment switch: Adjustable length.
7. Telescopic tube: 16″ adjustable.
8. Side swivel switch: 90° swivel, side swivel when using the side wheel.
9. Side wheel: second to the trimmer.
10. Sliding wheel: to make work easier.
11. Head adjustment: 90° swivel of the head.
12. Protective wire: for effective protection of flowering plants.
13. Blade mounting: 4 types of blades are available for replacement.

PRODUCT INSTALLATION INSTRUCTIONS

1. insert Side Balls (Pre-Assembled)
2. Align The Machine Head And The Stopper
3. There Is A Raise Cate Where The Circle Is Drawn, Push The Catch Firmly Into The Recess Of The Machine And You Will Hear A ‘Click’ So That The Screw Holes Are Aligned.
4. After The Buckle Is Pushed In, The Screw Holes Will Be Aligned, And Then Screw In The Screws.
5. Screw In The Screws And The Installation Is Complete.
6. The Installation Is Complete.

Note: The most important thing is step 3, make sure to align the raised buckle with the recess in the machine head and push it in hard.

Two. How To Install The Blade:

1. Unscrew The Nut Of The Machine Head
2. Unscrew The Nut And Washer
3. Put The Cutter Head In
4. Put The Gasket First, Then Tighten The Nut To The Left, And The Installation Is
5. The Installation Is Complete
6. If You Want To Install A Straight Nylon Blade/Metal Willow Blade/Saw Blade, You Must First Remove The Double Flying Blade Cutter Head.
7. Put In The Nylon Blade
8. Tighten The Nut, And The Installation Of The Nylon Blade Is Completed
9. Put In The Metal Blade
10. Tighten The Nut To Complete The Installation Of The Metal Blade
11. Put In The Circular Saw Blade
12. Tighten The Nut To Complete The Installation Of The Saw Blade

Three. Double Flying Blade Cutter Head, Blade Installation:

1. Put Down The Large Aperture Alignment Screw
2. Put In The Blade, Pull The Blade Outward, Into The Small Aperture
3. Enter The Small Hole, The Installation Is Complete
4. Push The Blade Inwards To The Largest Hole Diameter
5. Insert To Maximum Hole Diameter
6. Pull Up To Pull Out

Four. Sliding Wheel Installation Method:

1. Unscrew The Screws On Both Sides Of The Side Wheel.
2. Align The Serrated Part Of The Sliding Wheel With The Direction Of The Screw And Insert It To Adjust The Height You Want.
3. Finally, Tighten The Screws To Prevent Loosening During Use.

Five. Deputy Handle Installation:

1. Install The Adjusting Teeth
2. Install The Handle, Which Can Be Adjusted 180°
3. The Installation Is Complete

PRODUCT FUNCTION DISPLAY

1. When Using The Yellow Stand As An Aid To Mowing The Lawn, The Angle Should Be Adjusted By 130°-140°
2. Please Adjust The Comfortable Length For Different Heights
3. Rotate The Head 90° To Open The Side Wheel Function
4. Press The Red Switch On The Top Of The Battery And Push It Into the Recess Of The Machine At The Same Time (Universal Makita Battery)
5. Battery Charging Interface, Please Keep The Interface Dry To Avoid The Danger Of Short Circuit
6. Power Indicator Shows Red For Charging, Green For Charging Complete (90 Minutes To Full Charge)

SIDE WHEELS AND SLIDING WHEELS DISPLAY

• Note: When Using The Side Ball, Rotate The Machine Head 90° Horizontally. It Is Recommended To Use A Straight Nylon Blade When Trimming With The Side Ball. Be Careful Not To Touch The Ground When Using It, Otherwise, The Blade Will Be Broken.
• Note: When Using The Stand In Conjunction With Clearing Large Areas Of Grass. It Is Recommended To Use A Straight Nylon Blade/ Metal Willow Blade To Effectively Extend The Working Time. When Using A Straight Nylon Blade, Avoid Contact With Hard Objects, Or The Blade Will Break.

DISPLAY OF VARIOUS BLADE SCENES:

• Precautions: When Using A Pulley To Clean A Tidy Lawn, It Is Recommended To Use A Nylon Blade, Which Cuts Faster And With Less Effort Than A Mowing Rope And Will Clear The Lawn Quickly. Plastic Blades Should Avoid Hard Materials Such As Stones/Branches, Otherwise The Blade Will Break. If There Are A Lot Of Stones On The Lawn, It Is Recommended To Use A Metal Willow Blade To Cut So That You Don’t Have To Worry About The Blade Breaking.
• Note: The Hanging Blade Allows For A Quick Change Of The Plastic Blade And Is Suitable For Trimming Some Weeds As It Is Quicker And Cuts More Efficiently. Please Duck When Encountering Stones/Branches.
• Do Not Come Into Direct Contact With Stones Or Branches Or The Blade Will Break.
• Note: When Cutting Shrubs And Grass, It Is More Suitable To Use The Metal Willow Blade, Which Can Be Cleaned Quickly, But It Is Not Recommended To Cut Thicker Branches.
• Note: This Saw Blade Is Ideal For Pruning Shrub Branches, But Is Not Recommended For Cutting Branches That Are Too Thick Or Overgrown.

BATTERY 2.0A BATTERY AND CHARGER

90 minutes

| 90 minutes
Plastic Blade Use Time| The no-load time is about 70 minutes, and the actual use is about 30-50 minutes| I

Plastic Hanging Blade Use Ime| The no-load time is about 50 minutes, and the actual use is about 30-45 minutes| I
Metal Blade Usage Time:| The no-load time is about 70 minutes, and the actual use is about 25-40 minutes| I
Circular Saw Blade

Usagelime:

| The no-load time is about 36 minutes,

and the actual use is about 20-30 minutes

| I
Precautions:| When the battery is discharged, it must be recharged.d. Long- term emptying will| I

Parameters and Precautions

/

Rated idle speed:| 11500 rpm fast cut| 11500 rpm fast cut
Maximum cutting diameter:| 260mm| 260mm
Precautions:| The equipment should be carefully inspected before use. Due to possible damage during transportation, if any part of the device is damaged or worn, the damaged part should be repaired and replaced/or contact customer service for replacement before the device is used.

WHERE TO BUY BLADES AND BATTERIES

BB0BSN4PPRC On Amazon
Price:| 14.98 GBP (Subject To Change)| 17.98 GBP (Subject To Change)
Set Contains:| 30 * Hanging Plastic Blades (With cutter plate)

14 * One-Piece Plastic Blades

| 1 Circular Saw Blad
6 Metal Blade

Note: If It Is Damaged After Receiving The Goods, Please Contact Customer Service For A Free Replacement.

B0BSN3G3PT On Amazon
Price:| 50 GBP (Subject to Change)| 20 GBP (Subject to Change)
Set contains:| 2*2.0 battery and charger| Protective Plate+ Stand + Handle+ Pulley

Note: If It Is Damaged After Receiving The Goods, Please Contact Customer Service For A Free Replacement.

Dear Customer:

• Thank you for ordering our product, it is a high-quality multifunctional cordless mower, you need to refer to the installation manual before using it,
• If you have any questions about installation or missing parts in the package, you can always write to me and I will help you within 24 hours.
• If you are not satisfied with the mower, please contact me via Amazon, explain why and we will provide you with a 100% solution.
• (Note: If the charger does not work, please check the plug fuse).
• The mower is equipped with four types of blades that can be fitted

1. One-way nylon blades: suitable for mowing young lawns and tender grass, the plastic blades are more durable than traditional stringers. (Easier to use with sliding rails)
2. Double flying nylon blades: suitable for mowing young lawns and tender grass, the plastic blades are more durable than traditional stringers. (Easier to change blades, not recommended to install sliding track)
3. Steel wicker blades: suitable for trimming older branches and thicker weeds, which are not found on traditional stringers.
4. Alloy circular saw blade: suitable for pruning branches and, as we advertise in the video content, it can prune thicker branches effortlessly (sliding track not recommended for installation)
5. We value your experience and hope that you will give us valuable suggestions if you think our products are wrong in some way. We will listen carefully to every customer’s suggestions and try to make a product that satisfies you

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>