testo 552i Smart Probe for Vacuum Measurment User Guide

June 6, 2024
testo

testo 552i
**0564 1552

Free download
testo Smart-App

**https://qr.testo.com/ldtw8z

www.testo.com/en/services/download

www.testo.com|
---|---
|

Approval and Certification

Product testo 552i
Mat.-No. 0564 1552
Date 18.05.2021

The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use and acknowledges that the re-sale, export, import, etc. in particular in countries without wireless permits, is his responsibility.

Country Comments
Australia
Brazil

05185-21-04701
See Brazil Information
Canada| 05185-21-04701
China| See Brazil Information
| IC ID: 61276-05641552 see IC Warnings
| CMIIT ID: 2021DJ5269
Europa ♦ EFTA| The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product- specific downloads.
EU countries:
Belgium(BE), Bulgaria (BG), Den-
man( (DK), Germany (DE), Estonia
(EE), Finland (FI), France (FR),
Greece (GR), Ireland (1E), Italy (IT),
Latvia (LV), Lithuania (LT), Luxem-
bourg (LU), Malta (MT), Netherlands
(NL), Austria (AT), Poland (PL), Por-
Dugal (PT), Romania (R0), Sweden
(sq. Slovakia (SK), Slovenia(SI),
Spain (ES), Czech Republic (CZ),
Hungary (HU), United Kingdom
(GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
  WEEE  Reg. no.: DE 75334352
Hongkong| Authorized
Malaysia| Type Approval Code: RGOU/01A/0321/S(21-1019)
|
South Africa| TA-2020/8013
Turkey| Authorized
USA|
FCC ID: WAF-05641552

see FCC Warnings

Bluetooth®- Information Feature Values
Bluetooth® up to150m (490 feet) (free field
radio type Bluetooth® Low Energy (BLE) 4.2
company LSD Science & Technology Co., Ltd Lerida LSD4BT_S37
RF Band 2402 — 2480MHz
power output 15.22dBm
Bluetooth® SIG Listing Declaration ID D043363
member company Testo SE & Co. KGaA

IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian  ICES-003. RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Caution : Radio Frequency Radiation Exposure
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets the IC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from the person´s body in a normal use position to ensure compliance with RF exposure requirements.
Co-Location:
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person´s body in normal use position to ensure compliance with RF  exposure
requirement.
Co-Location:
• This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Brazil Information

Mat.-No. 0564 1552 55
Country Comments
--- ---
Japan Contains Lierda S37 BLE module  201-200983   See Japan

Information
South Korea|

R-R-te2-05641552 see KCC Warning

Bluetooth®
Information
| Feature| Values
---|---|---
Bluetooth®
range| up to100m (328
feet) (free field /

power output

| up to100m (328
feet) (free field /

KCC Warning
There is a possibility of radio interference during the operation of the radio equipment.

Japan Information
The equipment is certified to conform to technical standards based on the Radio Law. The specified radio equipment received is installed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals