testo 560i Digital Refrigerant Scale User Guide
- June 5, 2024
- testo
Table of Contents
testo 560i Digital Refrigerant Scale
Product Overview
How to use
Approval and Certification
Product
产品名称
| testo 560i
---|---
Mat.-No.
型号
| 0564 1560
Date
日期
| 24.03.2022
The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner have the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import, etc. in particular in countries without wireless permits, is his responsibility
| Country | Comments |
|---|---|
| Australia | |
| Canada | IC: 6127B-05641560 |
See IC Warnings
Europa + EFTA|
The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE), Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK), Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary (HU), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE Reg. no.: DE 75334352
Japan| R 201-210972
See Japan Information
South Korea|
R-R-te2-05641560
see KCC Warning
Turkey| Authorized
United King- dom (UK)|
The UK Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads.
USA|
FCC ID: WAF-05641560
See FCC Warnings
Bluetooth® Information 蓝牙信息
| Feature
特征与参数
| Values
数值
---|---|---
Bluetooth® range
范围
| Typical 30 m
30米无障碍场地
Radio type
型号
| Bluetooth®
Low Energy (BLE) 4.2
Bluetooth® company
制造商
| Lierda Science & Technology Group Co., Ltd
RF Band
射频频段
| 2402 – 2480MHz
Power output [E.I.R.P]
输出功率
| ≤10dBm
Bluetooth® SIG Listing| Declaration ID| D059666
Member company| Testo SE & Co. KGaA
IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
RSS-Gen & RSS-247 statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Caution: Radio Frequency Radiation Exposure
- This equipment complies with radio frequency exposure limits set forth by the Innovation, Science, and Economic Development Canada for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to ensure
continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment. A
shielded interface cable must be used in order to comply with the emission
limits.
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
- This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.