testo 565i Evacuating Refrigeration System User Guide
- May 15, 2024
- testo
Table of Contents
testo 565i Evacuating Refrigeration System
Product Specifications
- Model: testo 565i
- Dimensions: 345 x 135 x 280 mm / 13.6 x 5.3 x 11 in
- Weight: 11.3 kg / 24.9 oz
- Power Supply:
- 120 V~ / 60 Hz, 3.3 A / max. 8.5 A, 805 W
- 230 V~ / 50 Hz, 1.9 A / max. 4.8 A, 800 W
- Vacuum Pump Capacity:
- For 7 CFM: 198 l/min / 7 CFM
- For 10 CFM: 283 l/min / 10 CFM
- Vacuum Level: 15 micron
- Refrigerant Fittings: 1/4 SAE, 3/8 SAE, 1/2 SAE
Product Usage Instructions
- Power Supply: Ensure the correct voltage and frequency settings before connecting the product to a power source.
- Vacuum Pump Operation: Select the desired CFM capacity based on your requirements (7 CFM or 10 CFM). Connect the appropriate fittings for your refrigerant system.
- Vacuum Level: Monitor the vacuum level displayed on the device to ensure it reaches the required 15-micron level.
- Wireless Module: Follow country-specific regulations for using the wireless module. Refer to the FCC IDs for compliance information.
Frequently Asked Questions
- Q: What are the FCC IDs for the wireless modules?
- A: For the 7 CFM model, the FCC ID is WAF-0564565201. For the 10 CFM model, the FCC ID is WAF-0564565301.
- Q: Where can I find the EU Declaration of Conformity?
- A: The EU Declaration of Conformity is available at www.testo.com/eu-conformity for EU and EFTA countries.
OVERVIEW
PLUG IN
POWER ON/OFF
CONNECTION
ACCESSORIES
Approvals and Certification
| Product | testo 565i |
|---|---|
| Mat.-No. | 7 CFM |
0564 5652
0564 5652 02
0564 5652 05
| 0564 5653
0564 5653 02
0564 5653 05
Model No| 0564 5652| 0564 5653
Date| 07.12.2023
The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner must adhere to these regulations and prerequisites for use and acknowledge that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility
| Bluetooth ® **data** | Feature | Values |
|---|---|---|
| Radio range | up to 60 m (196 feet) |
(free field)
Type| Bluetooth® Low Energy (BLE) Lierda LSD4BT-S98B
RF Band| 2402-2480 MHz
Output power| < 10 dBm
Company| Lierda Technology Group Co., Ltd.
Bluetooth ®
SIG Listing
| Declaration ID| D051404
Member company| Testo SE & Co. KGaA
Product| testo 565i
---|---
Mat.-No.| 7 CFM| 10 CFM
0564 5652 01| 0564 5653 01
Model No| 0564 5652 01| 0564 5653 01
Country| Comments
---|---
Canada| For 7CFM:
IC: 6127B-0564565201
For 10CFM:
IC: 6127B-0564565301
See IC Warnings
USA| For 7CFM:
FCC ID: WAF-0564565201
For 10CFM:
FCC ID: WAF-0564565301
See FCC Warnings
---|---
Bluetooth ® **data| Feature| Values**
---|---|---
Radio range| up to 60 m (196 feet)
(free field)
Type| Bluetooth® Low Energy (BLE) Lierda LSD4BT-S98B
RF Band| 2402-2480 MHz
Output power| < 10 dBm
Company| Lierda Technology Group Co., Ltd.
IC Warnings
CAN ICES-3(A)/NMB-3(A)
This Class A digital apparatus complies with Canadian ICES-3.
Cet appareil numérique de la classe A est conforme à la norme NMB-3 du Canada.
RSS-Gen & RSS-247 statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Caution
Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the
Innovation, Science and Economic Development Canada for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20
cm between the device and the user or bystanders.
Co-Location
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
FCC Statement
Information from the FCC (Federal Communications Comm/session) For your own safety Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. A shielded interface cable must be used to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution
Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
Co-Location
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>